I have many rows of data 6 columns wide. I want to be able to enter data into a specific section, then run a macro to "cut-and-paste" that data onto the bottom of my existing data (with one empty spacer row between the new and existing data)
Here's what I have so far:
[Code] ....
Basically the part I need working on is changing [ Range("A101:F130").Value ] to be dynamic. For the code to determine the last row of data, move 2 rows down, and paste the block there.
I have used a formula to achieve this before which seemed to work although now it seems to be replacing other data already in the worksheet so I am unsure of how to fix, thinking I should just start again.
The file in question is a tracker of activities, Column A (sheet1) is the Status and once the status is "Closed" I need to run a macro that copies all closed activities to Sheet5 at the bottom of previous closed activities. Once this is done I already have a macro to delete all "closed" activities from Sheet1 meaning that it is vital the new closed activities stack onto the bottom of previous closed activities.
The Column Headers start on Row 11 with activities running from Column 12.
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update() Dim bottomrow As Long Dim My_Range As Range bottomrow = Cells(Rows.Count, "C").End(xlUp).Row Set My_Range = Range("A1:Y" & bottomrow)
The following code is doing what I want it to do in part, its copying the data in range k3 to q3 to the next empty row in columns a to f
It works when I change any cell in column K (11), I want to change to only on a change in K7 or K8? As an afterthought if I'm dealing with the same sheet do I need to make reference to sheet2?
VB: Private Sub Worksheet_Change(ByVal Target As Range) Dim nextRow As Long If Target.Column = 11 And Target.Cells.Count = 1 Then
I have the below code that copies and pastes from one part of a spreadsheet to another. I need to modify it so that it does not over-write the information where it pastes to, but rather adds the new information to the lines below the data that is already there.
I have two sheets - sheet1 and sheet2. Everytime i run a macro in the sheet1and manually copy the rows from sheet1 {starting (A2:AI2)} and paste as values it in the sheet2 {starting (A2:AI2)}.
Then I ll delete the available datas in the sheet1 and will run a macro for different customer.
Again I need to repeat the same action (manually copy and paste the datas to sheet2) without replacing the existing data in the sheet1.
In simple I require a macro code where it copy the available information in sheet1 and paste it as values in the sheet2 without replacing the existing one.
I am trying to create a user form that will allow the user to type int values in boxes. Then when the user clicks the submit button the code needs to add the values from each user input box to the existing values in specific cells accross multiple worksheets. Then the form needs to be cleared after the cell values are updated. I can create the form it is the code on the submit button i am lost on. Also it is important that some boxes may be left blank.
If you click the Grey "Qty Form" button on sheet1 the form will open. User data numbers can be entered in the blank boxes. When the submit button is pressed the form needs to add the user entered numbers to the numbers in the corresponding cells in sheet 1 and sheet 2. How to code the submit button to do this properly. Also after the data on the spreadsheet is updated the form needs to be cleared and start the cursor back in the Item 1 box on the form.
I have a range of weekly data that I need to copy into another workbook, paste it below the data that already exists there and then delete the data from the original workbook. I would love to do this with vba but after hours of searching on how to do this my brain is frazzled.
I have 50 workbooks that I need to import weekly into one master sheet (Master.xlsm) but they need to be done individually after the weekly data has been checked. The master sheet will therefore have existing data and the new data needs to be appended at the bottom. Also column A will be blank in both workbooks so to find the last used row it will need to look in column B.
The number of rows in the weekly sheet will also vary rather than be a fixed range so I guess the last used row will also need to be found there too.
The attached file is a cut down version of my working file showing where the data starts on Row 14, I won't need to copy the headings.
getting data externally from web and also keeping the previous data prior to the refresh.
My external table/data has 10 rows reporting values per day (10 days data table).
I can link the table to my sheet, however what I can not do is to create an offlinek, year to date table in the sheet which captures the rolling 10 days (everytime it is refreshed) without losing the prior days.
Above table changes on a daily basis, only reporting the last ten days.
How can I capture this data on a rolling basis, i.e. in a year to date format, so that everytime I refresh, the internal table gets updated with the new data.
I have data I extract out of a datasource. I run a few excel scripts upon it and export the content to another spreadsheet. The column of data (I have columns a - h) i'm concerned with is H. The totals in that column regardless of the length of the column (could be 10 rows of data or 10,000) I need to delete the top 10% and bottom 10% rows completely of those numbers in H and leave the remaining 80% in tact.
I have a 23 sheets in a workbook and in each sheet i have around 1200 to 2500 data.
What i want is : from active sheet i want to open another sheet which is located at my desktop and should select column A, H & I all data (whether it is blank at last not to worry) and paste it into my active sheet in column A,B & C then i also have formula to calculate saving per shoe in column D,E & F.
For column D,E & F in active sheet the formula should fill down until the column A gets blank (For example : in column A,B & C under active sheet takes 1230 products so formula of the column D,E & F will end at 1230 row)
I have tried to record macro for the same but this is only for the restricted rows i.e. no. of row so I post it now.
need to create a macro that inserts 3 rows below each existing row of data and simply copies and pastes that data into each of the empty rows before moving on to the next unique row and doing the same thing again.
This is what I have so far, but I can't seem to get the loop right.
I have a column of data that comes from simple division formulas, E2/F2. I am wanting to take the Percentages given and quickly recognize the ones in the bottom quarter.
100% 75% 23% 39% 50% N/A 100% 5%
8 items - the lowest 2 (the bottom quarter) should "stand out" - 5% and 23%
I figured two options: 1.) Conditional Formatting - don't know what the formula would be to use 2.) If statement - preferred method.
I would like in the cell next to the percentages for there to be a blank cell if the amount is not in the bottom 25% and if it is I would like the cell to read "Yes" I thought something along the lines of =if(G2 in range(G2:G100)is bottom(.25),"Yes","") Of course that is not real code. I'm hoping someone will be able to edit that to make it functional. Or guide me in the right direction. And you may have noticed the "N/A" in the list above. I would like excel to view this as 100%, at the least just ignore it and don't give me an error.
I have a multi tabbed page and the page i want to sort (2) is looking up the 1st page and creating one column list from cell a1 to a280 and it includes a number of zero's from the look up pages because that is the correct result. I already have it sorting but I want it to sort and leave the zeros at the bottom (they are currently at the top) of the sheet so I can just print the info I need.
Can I create this in sort or do I need a macro and how can i write it as I am very green on VB.
Data consists of a series of ranges from columns A:N and rows varying in number between 3 and 30.
There are two blank lines between each range of data.
Each range is (with exception) numerically ordered down column H (e.g, 1, 2, 3, etc).
Problem: there are around 1100 occasions when a range contains a row of data which is to be disqualified from consideration. On these occasions the data always appears in the top row of the range and is identifiable in column H by the nine codes 111, 222, 333, 444, 555, 666, 777, 888, and 999).
I wish to find a macro which will :
1. where the top row of a range in column H is one of the codes 111 to 999, transfer that row of data to the bottom of the range.
2. delete the now empty top row from which the transfer was made from.
3. insert a new blank row at the bottom of the range below the row which the data was transferred to (in order to maintain the two blank rows above and below each range).
I am trying to add a macro that finds a dynamic range (number of rows changing with different data sets) sorts column B, then column A, moving blanks to the bottom. My dilemma is as follows:
I have a template with formulas that cannot be changed (I cannot paste special values, or clear the cells). Column A includes HLOOKUP formulas for cells A14:A120. Column B includes VLOOKUP formulas for cells B14:B120. The different data sets I pull in have different numbers of lines, which is why I need to maintain the formulas. However, I cannot seem to find a way to accurately sort column B first from smallest to largest and then column A from smallest to largest. In all data sets there will be at least a few blank lines that I need to move to the bottom. However, due to the formulas within the cells (column A returns a value of 0 and column B returns a value of “ “), excel does not recognize them as being blank. Here is a sample data set.
Branch S&C Group 77770000583-DOWNERS GROVE BRANCH MWBF2 77770000585-CHICAGO RIVER BRANCH MWBF1 77770000587-WEST TOWN BRANCH MWBF1
[code].....
In this case, I would like St. Charles & Algonquin to be at the bottom because column B is blank.
I'm looking for a simple piece of code I can use to manipulate the data on the attached workbook. Firstly, I need to be able to sort the data by column O ("Balance"). I then need the code to extract all the information for the top 10 and bottom 10 rows and paste the info into a new worksheet. The code will need to account for the fact the number of rows might increase/decrease with this report.
I have a macro that I recorded which is supposed to copy the contents from row 38 of my calculate sheet and paste the values of it below the last record on my monthly summary tab but it is not pasting below the last row of data. It keeps pasting to the top record. My code is below:
Each day I copy paste data onto a sheet (below the prior days copy paste). What's a simple code to automate this? I want to keep all prior day data and just paste into the first blank row
I am trying to add data to an existing chart with VBA. I have defined and populated my arrays, but I m not sure how to add them to graph. I am getting a Invalid proedure or call argument on the code below.
- opens a database checks each sheet in the database for a contract number,
- highlights the row in which it finds the contract and updates the database with claim number etc (not important)
- returns information to another sheet from the database
The macro works fine BUT I have recently realised that if the contract has already been paid out it will simple overwrite the information and I will not be aware that the contract had already been paid out.
I need the macro to return a value of "Already claimed" instead of "Found in Database" only if the contract number has already been updated.
Sub DataBaseCheck() ' Designed to check Database for claims issued each month ' Open Data Base file to facilitate matching process. ' Check for matching data ' Return checking data to spreadsheet & Update Database
Dim currentfile As String Dim WS As Worksheet Dim R As Range Dim Myvalue As String Dim Myrange As Range Dim Tcell As Range
I have a worksheet containing employee information (i.e. name, manager, department, etc.). I also have a userform that will be used to make changes to the employee information. The userform has three comboboxes and, when activated, the userform is populated with the existing data in the worksheet.
Here is the problem - I need to have the existing worksheet data populate (as it does now) but also have the combobox choices available in the event that one of the 'combo' fields need to be changed. How do I keep the existing worksheet data AND keep the functionality of the combobox?
