All Excel Sheets Data Copy And Paste Into One Sheet
Jun 20, 2013
Copy and paste the data from different excel sheets to one main sheet.
I will get a file which may contain 10 sheets or 15 sheets depends on data and rows also not sure it varies from sheet to sheet. Now, I would like to consolidate all the sheet data except first row (heading) for first instance I need heading and second sheet onwards not required the headings hence, macro should copy from second row onwards.
The data should get paste one by one if first sheet contains rows till A100 then in main sheet for second sheet data paste should happen from A101.
I have multiple .xls sheets in a folder. C:Documents and Settingsu369875DesktopProject stuffTestin Save_ASCompleted History. And need to copy the data in all of them and paste them into a new sheet (one main sheet) in this folder...........
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
I have a workbook that includes 4 seperate sheets that are used to record time and expenses for 4 members of staff. I want to write a macro to select the data I need from each sheet and colaberate together in a 'data' sheet so I can combine all the info to run time and expense reports per client showing combination of all time and expense incurred from all 4 staff.
I have named cell ranges in each of the 4 time-sheets. I proceed to record a macro, select the first named range, copy and paste into my data sheet, do a control home then control down arrow, then one more down arrow to get to the first blank cell and repeat the process for all four time-sheets.
This works until I add a new line and then the data will only appear for the last time-sheet (last row of data).
I have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.
I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.
We have a company and need to automating workflow.
The Master sheet contains incoming mail details by customer. Each employee is assigned a set number of customers to respond to. We want the information on the Master sheet to filter to a specific employee assigned sheet. On the employee assigned sheet, once filtered, they are to provide updates in column E
Date Reference no. Name Employee ID 16-Feb-12 S/S/1
[Code] ........
We need a macro that can filter customers' details to the specific employee assigned sheet based on the employee ID in the master sheet. For example, all customers assigned to DW (i.e with the 'DW' employee ID) filters into a sheet called 'DW'. Please note that the Master sheet is a continuous log updated daily. This macro must not duplicate information previously filtered once the employee enters a status update in column E.
On sheet "CoA" i have at table of periodic payments that is created via an input form and what I want to do is have accounting entries automatically generated in my cask book based on dates.
What I am trying to do here is to compare 2 lists in 2 different files, and when there is a match, then copy and paste the related cells of the matching name. Sorry if this sounds messy, perhaps the sample file I have attached can explain better.
Every month I get a new file in the format of “Data Source” sheet where the list of banks in column A and the figures in column M, AA and AB might change from month to month. For the sake of convenience, I put the source data as a different sheet instead of different file here.
I have an existing report template in the format of “Final report” sheet where basically I copy and paste the relevant cells according to the name of the banks.
I don’t think I can use Vlookup because the cells that I want to extract are not right beside the search criteria. If I’m wrong please correct me.
Anyway, assuming a macro is needed for this, I am wondering if I can create a macro, where it can search the list of banks in column A in “Data Source” sheet based on the list in column A in “Final Report” sheet, then copy the correct cells from column M, AA and AB and then paste them into the correct cells in columns B, E and H in “Final Report” worksheet?
Note that not all the banks in the “Final Report” sheet are in the “Data Source”, so for this example, row 4 for ABN Bank should remain blank after the search because it is not listed in the “Data Source”. The Data Source List might also change over time.
There is also this problem of the bank names from the “Data Source” sheet not being exactly the same as the existing list in “Final Report”. For example in this file, ANZ Bank in the other sheet have all the extra stuff behind, but we know it is the same bank.
for my school project, I am right now doing time tracking for all of my activities throughout the day with excel. Here is basically what I am doing: For everything I do, I record and put in start time and end time for the activity.(I use simple formula to subtract these twos) If my day goes on like study, break, study, meal, study, break and each activity takes one hour for each, I have total of 3 hours studying, 2 hours taking break and one hour for meal. I am using pivot table to show all totals for each activity.
Pivot table is working best as far as my knowledge goes as I can choose and look up total of multiple activity combined. The problem here is I am making one sheet per a day and I need to continue this for three months. (So that seems like 90 worksheet). What I was thinking is I make Sheet 1 as master sheet. Then, copy and paste the entire sheet for 90 sheets assuming all formulas including pivot table go along with them. then, when I put in new data to other sheet,magic happens and values in pivot tables will change relatively after refresh. You might be probably laughing hard at me right now. I know..I tried it for like 3 sheets. Simple formula to subtract endtime and start time still work accordingly with new data. But, Pivotal table is playing dead at all.
I researched and found that that might be problem with reference and absolute cell reference thingy. ( to make pivotal table work for different worksheet). All the cells used ( including column and row ) will be entirely the same for all worksheets. The only difference aka problem is different sheet. I want to use sheet 1 as a template and copy it down to next 90 sheets taking all contents except data. Is there anyway I can copy and paste the whole template to another 90 sheets while making pivot table work and calculate and update itself according to relative data from each own worksheet? I use excel 2007 btw
I want to copy data from workbook1-sheet1 to workbook2-sheet2. I done the coding and it was working fine till when the data to copy from and copy to is only 1 row.
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
* Click a single cell, and then paste. * Select a rectangle that's the same size and shape, and then paste. I believed when there's only 1 row of data, the code copy the entire sheet1 and can't locate the last empty row in sheet2.
Should I use a if to check for > 1 row of data (2 rows including header row) or is there a better way?
The idea is to find the new references that have been created every month in sheet 2 and paste into Sheet 1. How to find the new ones is easy .However I don't know how to move the data around sheets!
Sheet 2 (A1: AQ25135) A B C D
FIND NEW PO Purch.DocItem Vendor Vendor Name
200095185710 200095185710 15152695 UAB Pajurio Gabija
[Code] ......
I need to do the following:
Whenever you find the word "NEW" in a row of sheet 2 in range A2:A50000 copy the row from B to AM and paste it into sheet 1 Column A to AL.
However Column A contains already data. The data should be pasted right below the last A row with data
In sheet 2, column A contains the following formula
I'm trying to collate data from two sheets (sheet1 & 3) , paste it on sheet5 and do some calc. But the macro keeps copying the same row after 2 iterations. Also the find function stops working after 1st iteration. Not sure what to do
Sub Macro17() ' ' Macro17 Macro ' ' Sheets("Sheet1").Select Range("B3:L3").Select Do Until Selection.Row = 10000 Selection.Copy
I was wondering if it's possible to copy and paste formulas to a brand new excel sheet. I created an excel sheet with some forumlas but when I try to copy and paste it to a new page it only pastes the values and not the formulas.
Is there any way to transfer the formulas as well?
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
Code: Sub MM1() Dim lr As Long, lr2 As Long, r As Long, ws As Worksheet Application.ScreenUpdating = False Sheets.Add ActiveSheet.Name = "NewSheet" For Each ws In Worksheets lr2 = Sheets("NewSheet").Cells(Rows.Count, "A").End(xlUp).Row
edit to copy rows? 100rows each sheet or 200rows etc.
How to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
I have an excel file with 9 sheets and I want to copy all the data from those sheets to a master sheet but with out the formulas . I need the values only to appear in the master sheet. I used the following vba macro code which I found it while I was searching for an answer, it did it perfectly except for the formula part. !! I guess, it has to be edited by adding some codes with paste options but I don't know how!
Code: ' CollectMasterData Macro ' Sub CopyToMaster() Dim wkSht As Worksheet Dim DestSht As Worksheet Dim DestRow As Long Set DestSht = Sheets("MasterData")
[code].....
Note: my headers are @ row 1 and 2 and my formula is in column A.
I have a workbook with multiple sheets. Within the workbook there is 1 mastersheet and 30 other sheets. On a daily basis, I need to copy all the data from the 30 sheets to one single sheet.
For each sheet being copied, I want to copy all data with the exception of the first row. Some of the sheets may contain blank lines. I am have trouble getting my code to copy all the data.
I have some data in Columns A&B of Sheet2 in my workbook. I was wondering how I could make this Auto Copy & Paste into a New Sheet of my Workbook and name the new Worksheet "New Sheet". A VB Macro is what i ma currently using to generate the data.
I need to take data from one sheet named "January" and paste it into another sheet named "Projections Sheet".
I want to use a checkbox to do this. So when the box is checked the data is entered into the next free row on the "Projections Sheet" starting in column B.
For example; I have data in "January" row 6, columns A through F. I need this data copied and pasted to "Projections Sheet" in the next free row (starting in row 6) and starting in column B.
Also, when I uncheck the box in January, I'd like the data removed from "Projections Sheet"
I need to firstly find data in the main sheet which relates to the activecell and then I want to copy and paste that data into another worksheet.
The simplest of ways I guess would be the .xldown function however this seems to copy the blank cells as well as the cells with data, which is no good. I have therefore written code as below which finds the first cell with data, copies and pastes, then loops.
How do I set the loop to look at the next cell down from the initial copied cell and if there is data in it to paste it into the cell underneath the one I have just pasted into?
I presently have a workbook that contains a summary sheet called "Sum" and a few other worksheets called Building A1, Building A2 and so on until Building A5. All the worksheets have similar layout with the Header at Cell A4 to H4 and the data starting at Cell A6:H6 onwards. At present, I have to manually clear the summary sheet and then copy and paste from each of the worksheet unto this summary sheet one by one.
I have a sheet in which you enter in new information. I need a macro to copy that information onto another sheet, onto the first empty row, so it does not clear the information that has already been entered. The first sheet is an information entry sheet, and the second is the database, which contains all of the information. I hope this is clear, if you do not understand, I will be happy to rephrase my question!
I have included two screenshots of the excel system. They are named.
