Copy Paste Data Between Sheets Based On And If
May 2, 2014
I have a workbook containing sheet 1 and Sheet 2
The idea is to find the new references that have been created every month in sheet 2 and paste into Sheet 1. How to find the new ones is easy .However I don't know how to move the data around sheets!
Sheet 2 (A1: AQ25135)
A
B
C
D
FIND NEW PO
Purch.DocItem
Vendor
Vendor Name
200095185710
200095185710
15152695
UAB Pajurio Gabija
[Code] ......
I need to do the following:
Whenever you find the word "NEW" in a row of sheet 2 in range A2:A50000 copy the row from B to AM and paste it into sheet 1 Column A to AL.
However Column A contains already data. The data should be pasted right below the last A row with data
In sheet 2, column A contains the following formula
(=IF(B2>0,IFERROR(VLOOKUP(B2,Sheet1!$A$2:$A$20182,1,0),"NEW"),"")
The possible results are : Numbers>0, “NEW” and “” as you can see in table Sheet 2
View 1 Replies
ADVERTISEMENT
Oct 21, 2009
On sheet "CoA" i have at table of periodic payments that is created via an input form and what I want to do is have accounting entries automatically generated in my cask book based on dates.
The code for the input form is as follows;
View 14 Replies
View Related
Apr 1, 2014
I want to copy data from workbook1-sheet1 to workbook2-sheet2. I done the coding and it was working fine till when the data to copy from and copy to is only 1 row.
Code:
Sub sheets_merger()
location_path_file1 = Range("location_path_file1")
location_path_file2 = Range("location_path_file2")
file1 = Range("file1")
file2 = Range("file2")
[Code] .......
Below is the exact error message:
HTML Code:
Run-time error '1004':
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
* Click a single cell, and then paste.
* Select a rectangle that's the same size and shape, and then paste.
I believed when there's only 1 row of data, the code copy the entire sheet1 and can't locate the last empty row in sheet2.
Should I use a if to check for > 1 row of data (2 rows including header row) or is there a better way?
View 8 Replies
View Related
Jul 4, 2012
I have a workbook that includes 4 seperate sheets that are used to record time and expenses for 4 members of staff. I want to write a macro to select the data I need from each sheet and colaberate together in a 'data' sheet so I can combine all the info to run time and expense reports per client showing combination of all time and expense incurred from all 4 staff.
I have named cell ranges in each of the 4 time-sheets. I proceed to record a macro, select the first named range, copy and paste into my data sheet, do a control home then control down arrow, then one more down arrow to get to the first blank cell and repeat the process for all four time-sheets.
This works until I add a new line and then the data will only appear for the last time-sheet (last row of data).
View 2 Replies
View Related
Nov 3, 2008
I have multiple .xls sheets in a folder. C:Documents and Settingsu369875DesktopProject stuffTestin Save_ASCompleted History. And need to copy the data in all of them and paste them into a new sheet (one main sheet) in this folder...........
View 2 Replies
View Related
Jun 20, 2013
Copy and paste the data from different excel sheets to one main sheet.
I will get a file which may contain 10 sheets or 15 sheets depends on data and rows also not sure it varies from sheet to sheet. Now, I would like to consolidate all the sheet data except first row (heading) for first instance I need heading and second sheet onwards not required the headings hence, macro should copy from second row onwards.
The data should get paste one by one if first sheet contains rows till A100 then in main sheet for second sheet data paste should happen from A101.
View 5 Replies
View Related
Mar 24, 2009
There's one sheet that has a list of customers (this is updated very frequently). These customers are either New or Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (view list new), and a copy of new customers into a third worksheet (view list existing), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isnt any data in there from the previous time each list was copied in).
Ive given this a go via the record macro function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)
View 3 Replies
View Related
Jan 30, 2014
I have an Excel Spread Sheet that lists all of the people who have been issued Keys in your workplace, so the row has multiple information columns (Name, Department, Key Code, etc). One row is titled "Left Workplace" and you can select either a Yes or a No. Based on that selction I want it to copy and paste into a different spreadsheet (Either Inactive - if "No" is selected or Active - if "Yes" is selected) What is the best way to go about this?
View 2 Replies
View Related
Apr 24, 2014
This code basically copies data from one worksheet to another worksheet based on the date and works great.
However, I have been asked to changed the format of the spreadsheet and the code needs to be changed. The code is in "This workbook".
The code takes the data from the summary tab and copies it to the archive tab. I now need it to take it from the summary tab and copy it to the archive 2 tab.
I have attached a copy of the spreadsheet. Data and Archive2.xlsm
View 8 Replies
View Related
Feb 3, 2012
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
View 1 Replies
View Related
Jan 28, 2014
I would like to copy and paste the values from a worksheet (HS-Detail) in a file to different tabs depending on the value in column A (Regions). I have a macro that works but it pastes the formulas and it takes quiet a while to run due to the number of records. How can I alter this to paste just the values and speed up the macro?
[Code] ......
View 3 Replies
View Related
Jun 29, 2007
I have created an action plan in Excel, with a column containing the values Yes, No and Partial to show prgress against the actions. I have used CountIF (in cells D72 to D74) to count the number of each Yes, No and Partial. I want to be able to put these figures in a chart each month. I am using columns F to Q for the chart data. the headings of the chart columns are month values, e.g, F1 is "6" (for June).
I have used Month(Now()) to generate the current month value in cell B1. I now need a macro that will check the value in B1 against the chart table headings in F1 to Q1 and if it finds a match, will copy the values D72 to D74 into the chart table below the relevant heading.
View 8 Replies
View Related
Feb 8, 2010
I have the following code that performs a row copy based on selected dates which is then pasted to another sheet as a report. I need to also perform the same copy from another sheet with the same structure so the All_Report contains the data from both sheets. The name of the other sheet to copy the information from is "Closed_Requests".
View 10 Replies
View Related
May 6, 2014
The sheet I have attached has three tabs one is a master sheet another is the production input and the last is an engineering input section, I have coded the production input section to input into cells and email the engineers when they have a new job, the issue i have is with the engineering input.
The engineers can currently go into this sheet and input the job number onto the engineering input section and it will show them the current issue from the master sheet (I have already entered 1002 in it), what I want them to be able to do is input into the white sections below the description and when they click on update entry a macro takes the job number entered into B3 and saves the information onto the mastersheet in the correct column/row which corresponds to the job they are updating.
However the engineers may need to go into the same job several times and update different information therefore the fields need to not paste into the cells if the input sections are blank.
Masterfile.xlsm
View 1 Replies
View Related
Apr 14, 2014
I need to copy and paste the specific dates from the specific city that the user will insert in the "dash" sheet.
Basically, I need the macro to read the city and range of dates that the user will type into the "dash" sheet and copy the columns "AA" to "AD" from rows specified by the dates input. Once it has been copied, it has to be special pasted just the value onto the sheet "1" beginning at location B2.
the the data will not be available as it is vlookups to another excel sheet that i have not provided. I have deleted the data, but you can pretty much put 1's everywhere.
View 11 Replies
View Related
Dec 26, 2009
I have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.
I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.
View 9 Replies
View Related
Sep 4, 2006
I have a workbook with 2 - worksheets "DATA" and "LETTER".
The "DATA" sheet has columns "First Name" "Last Name" "Address"...etc.
The user can enter in either a "X" or a "x" in cells B6:B100 on the "DATA" worksheet.
After the user enters a X or x and hits the macro button I need it to copy certain cells from "DATA" worksheet to "LETTER" worksheet. I have listed a example below.
In this example if a "X" or "x" is entered into B6 on "DATA" worksheet and the macro button is hit, then: ....
View 9 Replies
View Related
May 12, 2008
I need to copy all the work sheets into one single work sheet (mastersheet). The source work sheets are having same column structure. The condition which i need to take care of is that after column 3 if at all there is any data till column 10 then in the destination mastersheet these should be copied in different rows with first two columns repeated. I need to do this using VBA macro.
View 9 Replies
View Related
Jun 20, 2006
What i want to do is copy all records from whatever date i enter, onto sheet test. The full excel file has over 80 worksheets for each individual rep, the example i attached has 8 sheets..
View 9 Replies
View Related
Jul 19, 2013
I've got a file with 75 sheets. Each sheet consists of a fairly elaborate header (logo, other design elements, etc.) and columns of data. I'd like to remove each sheet from this "master" file and copy it to its own file. But when I do this, the formatting is all screwed up- the logo and designs are distorted. I tried to adjust the row width and column height to fix it, but it doesn't come out the same (plus it takes forever). Is there a fast and easy way to copy each sheet onto its own file sheet?
View 4 Replies
View Related
Feb 11, 2008
I'm trying to copy data from one cell in a newly added sheet (Input) and paste it on other sheets of the same workbook all at the same time.
View 4 Replies
View Related
Jul 30, 2014
I wonder whether I'm using the code below to copy data from two 'Source' sheets to one 'Destination'.
[Code] .......
The code does copy and paste the correct inofrmation, but the problem I have is that the data from the latter sheet i.e. "IDEAS Actuals" overwrites the data from the "IDEAS Forecast" sheet.
How I would be able to change this so the data is copied underneath each other.
View 2 Replies
View Related
Dec 31, 2008
clear, copy and paste on different sheets
I recorded the following macro :
View 2 Replies
View Related
Jan 27, 2010
I'm currently making a database of my DVDs and BluRays, and thought that doing it in Excel, would make it nice and easy to see.
Tho, after some testing on my own, and redoing some of the sheets, to make it easier and less work, I'm stuck ....
View 8 Replies
View Related
Nov 3, 2011
I have a code that copy and paste a productlist into one sheet.
Is it possible to do this for three sheets all in one operation? I have read about the grouping, but doesn't that affect the whole sheet, so if I write something in one sheets cell, it will be sent to the others at the same time?
Code:
Sub CopyProductlists()
'Set **** = Worksheets("Sheet1")
RAnge("B1").Select
[Code]....
View 3 Replies
View Related
Dec 7, 2011
show what is the right vba syntax to copy the name of a sheet in order to past it in a cell?
View 5 Replies
View Related
Sep 2, 2013
I need a Macro to copy a set range from the Active Sheet and Paste Values in the next available row in a named sheet.
View 5 Replies
View Related
Jun 6, 2014
I would like to create a formula on sheet 1 and be able to copy and paste it to 20 sheets in the same workbook.
View 2 Replies
View Related
Feb 17, 2009
I have a workbook with 100 worksheets.
I need to copy the range a[96]:b[125] from each sheet into one sheet.
View 9 Replies
View Related
Mar 23, 2007
i m trying to create a basic edxcel spreadsheet design
Sub Macro2()
Sheets("Draft").Select
Sheets("Draft").Copy After:=Sheets(9)
ActiveSheet.Shapes("Button 81").Select
Selection.Cut
End Sub
where it says sheet 9 i want to change so it copies to the end of my sheets
View 2 Replies
View Related
