Copy Values From A Worksheet To Another Workbook. Source Workbook Name Unknown
Aug 12, 2009
I need to copy a range of values (actually two ranges). The ranges are of fixed size. Le't say A2:D20 and E2:H20.
Both workbooks have the exact same layout, and they both have the same named worksheet (in this case it's called Entry). However the actual filename of the source workbook is unknown. I know numerous users have changed the filename of the xls file.
I want to instruct them to open the old and new workbook, and open a third workbook containing the copy macro, they run the macro and it copies the data.
How can I reference a known worksheet name but of an unknown workbook name esp when the source and destination share the worksheet name?
I am try to copy a worksheet "exactly" from one workbook to another, i.e. all formulas and range names reference the new workbook and not link back to to the workbook they were copied from. The code below brings the formulas and named ranges over still referencing the source workbook: SourceWB.Sheets(sht).Copy after:=TargetWB.Sheets(sht)
I found this code online to copy values only to new workbook from multiple worksheets. However, How could I manipulate this code to only copy one sheet not multiple sheets to new workbook?
Code: Sub nowe_poprawione() Dim Output As Workbook Dim Current As String
I've managed to figure out part a certain code (or part of it) for copying an existing worksheet to a new workbook but ran into some trouble. Thus far I've adjusted it several ways, and as of now I am trying to have it open into a new workbook, but also copy and paste the data from the original workbook to the new workbook as paste special, values only, as the 1st workbook is linked to bloomberg and therefore contains live data. Below is the code I have so far. how to modify this so as to achieve what I'm trying to do. I've attached the current code I am using.
fyi : 'holdings' = original workbook 'GLV' = original worksheet 'GLVcurrent'= new workbook 'GLV' = new worksheet
I have a workbook that has quite a bit of data and goes through a lot of processing to arrive and a final summary worksheet. I want to take this summary worksheet and copy the values to a new workbook.
The issue is when I use the following code, it pulls the worksheet into a new workbook with the formulas (which turn to error messages since there is no longer a connection to the data source).
I could lengthen the code to create a new workbook, select the original data, copy, paste values into the new workbook, but that approach seems longer than needed. I'm sure there has got to be a way to copy just the values quickly and simply.
HTML Code: Dim Template As Workbook Dim SourceData As Worksheet Set Template = ActiveWorkbook Set SourceData = Template.Sheets("Summary") SourceData.Copy
At this point I now have a new workbook with one worksheet full of "#N/A" and "#VALUE!". Is there a way I could do something like "SourceData.CopyValues"?
I have an open workbook (A) and this is where the code should reside. I want to use VBA to copy the content of an entire worksheet from a closed workbook (B) to an existing worksheet in workbook A. How would you accomplish this?
I am looking for a code that would copy the data from each worksheet in a given workbook and then paste to just one worksheet within a different workbook. The Sheet names are auto generated when I run this canned report but the naming structure is always the same...the first worksheet is named Repair Details and then the next sheet is named Repair Details_1, the next sheet is named Repair Details_2 and so on for every sheet in workbook. So I would like to copy all of the data(Headers to last cell) and then paste in a worksheet(ex: Master Repair Report.xlsx and the worksheet could be titled Master Repair Details) on a different workbook, then the next sheet would copy from the one under the header to the last record and paste to the same workbook. This process would repeat for every worksheet in the Repair Details Workbook and paste to Master Repair Details worksheet in the Master Repair Report workbook.
I have a workbook that has a lot of formulas in it that reference material stored on my local computer.
I need a macro that will copy all 42 tabs in to a new workbook book without all formulas, but saving all the formats have made. This would save me from every other day coping and pasting manually each of the pages.
I am working with multiple workbooks with several tabs in each one. I need the forumula to update the "sheet name" from the source workbook even if the destination workbook is closed.
this is a portion of the forumula I am working with:
I have code that i use to copy a worksheet of information in one workbook to a worksheet in another workbook. All i need is some guidance on how to copy a second worksheet from workbook 1 to a second worksheet in workbook 2. Should be fairl straight forward.
In the below i am copying the sheet Phone_data to a second work book sheet also called Phone_Data, i would like to include in the same proccess a sheet called Sur_Data from workbook 1 copy to a sheet called Sur_Data_R in the second. All the other features like find next empty row also apply.
I want see if it's possible to take the name of the source workbook and put it in a cell in my destination workbook and then use that as the reference in formulas. The source document title includes a date that changes yearly, or in some instances changes entirely, and I want to keep the formulas in the destination workbook intact. I don't want to have to go to every instance where I have used the source workbook and change the title. Instead I would like to copy the source workbook title, paste it into the destination in the same cell and have that propogate the needed changes into the destination workbook formulas.
Say I have Source Workbook X 1, and Destination Workbooks X 4. The Source workbook contains a number of lookup values. I want the lookup values to be maintained in the single Source workbook, and I want this workbook to remain closed when the end users are using their Destination workbooks. It is critical that certain cells in the Destination workbooks have validated data in order for formulas and summarizations to be correct.
I'm happy if the Destination workbooks contain a lookup worksheet (perhaps hidden). In short, I'd like the contents from the Source workbook, Lookups worksheet, to just be replicated "as is" into the Destination workbooks, Lookups worksheet. I then want to do my data validation from that worksheet, which of course is open (data validation appears to only work with open workbooks).
I've investigated the techniques in this link: [URL]
Questions:
1) Are the techniques in that link about the best approach? i.e. an external link plus array formulas?
2) A blank cell in the source workbook (text column but formatted as General) is resulting in a zero in the external link. How can I make the external link exactly match the text as entered in the source workbook?
I have my VBA Codes set in a workbook (Production) that my supervisors open to calculate production. So when they open the workbook (Production) I have a button that they push that starts the code however I need to put something in that activates the other open workbook, The problem is that the name of the workbook that they run the code on can change.
I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
I have a workbook that contains budgets for as many as 50 divisions. I don't always know what the names of the divisions are going to be. I need a macro that will go through each worksheet and copy aa1:ao200 and paste it to a worksheet named "upload" in the next available row.
Here is something that i found here but i cant make it work.
Sub Macro4() ' Macro4 Macro For Each ws In ActiveWorkbook.Worksheets With ws Range("AA1:AO200").Select Selection.Copy If Application.WorksheetFunction.CountA("B:B") = 0 Then
I have been struggling with trying to find a way to copy worksheets from one workbook to another. The workbooks change each month. As I was searching the forum for previous threads on this topic, I found this great code, but I need to modify it just a bit and I do not know how to do that. The code allows the user to select the worksheet to import, but it imports it to a new workbook and I need to be able to not only select the sheet to import, but the workbook to import it to.
Though VBA I am trying to copy one worksheet into a new workbook. This worksheet contains Graphs which point to other datasheets in the same workbook.
I first copy the data worksheets, then I copy over the worksheet with graphs. However the graphs link to the original worksheet name- not to the datasheets in the same workbook as the newly created workbook. This is a problem since I am going to send this other workbook to users and they won't have access to the orginal datasheet.
I copy the sheets using the code:
Set wsheet = inbook.Sheets("Division") wsheet.Copy after:=gobjOutBook.Sheets("Executive Summary")
Where the worksheet DIVISION is the worksheet containing the graphs and the data sheets are already copied there.
The macro below copies certain sheets from one workbook to another, however the worksheets are protected in the original but when they are copied to the new workbook the protection is removed. Is there any way to keep them protected once copied?
I also have a couple of buttons with macros assigned to them one of which I would like to remove when the worksheets are copied to the new workbook, is this possible?
Code: Sub REN_REPEAT() ' Rename
Dim myName As String 'Copies the sheets to a new workbook: Sheets(Array("NEW_ORDER_", "CP_NOTES", "DATA")).Copy
I am trying to copy a worksheet called "Survey Extract Agents" from one workbook into another called "Raw Test Data". "Raw Test Data" is also the name of the sheet in the workbook of the same name. I want the "Survey Extract Agents" to be inserted after the "Raw Test Data" sheet. My macro keeps choking on it....
I need to come up with a macro code to copy 2 worksheet from 2 workbooks to my current workbook. I do not know what is the code such that i can copy different worksheets from other workbooks to a currently opened workbook.
Below is the scenerio i want to achieve:
worksheet1 from workbook1 need to be copied and paste as a worksheet in workbook3. worksheet1 from workbook2 need to be copied and paste as a worksheet in workbook3. workbooks will eventually contain 2 worksheets which are from workbook1 & 2.
I am trying to use a routine that I copied from another thread on this forum, but I get an error message: Runtime error "1004" Copy method of worksheet failed.
How to copy the entire worksheet into a new workbook and save the file to a specific directory with the following filename format ("exceptions191011 - ie. the word exceptions followed by today's date in ddmmyy format).
How to add the following condition that if a file already exists with that name then to bring up an error message stating the file already exists? As well as save the new workbook, it appears to close the original workbook - can I stop this?
I'm trying to make a macro that would match the text in a cell of a Workbook #1 to the name of a worksheet in Workbook #2 and if so would copy that worksheet to Workbook #1.
So if cell A1 was named "red" in Workbook #1 And there was a worksheet in Workbook #2 named "red"
Then it would copy all of worksheet "red" to workbook #1.
End Sub The source workbook is named PS444 The receiving workbook is named PS444Log The sheet to be copied and moved is named sales
The source workbook is already open and the code is executed by clicking a button on the worksheet.
If I perform the steps manually the worksheet in the source workbook gets copied correctly into the receiving workbook.
The problem lies when I try to execute the code, the source worksheet doesn't get copied to the receiving workbook. The receiving workbook gets opened but the worksheet does not get transfered. Neither of the workbooks are protected nor are either of the worksheets protected in the workbooks. Can someone tell me why the code is not copying the sheet to the receiving workbook. I developed the code using the macro recorder so I don't understand why it doesn't work.
