Copying And Manipulating Formula?
Oct 15, 2012
I am unsuccessfully trying to manipulate and copy a formula.
Column A would typically be used as a benchmark for one retailer and have the base price with the other columns simply showing differences in margin etc if the price was changed. This would typically mean the BWP and fixed terms etc would be constant.
However in this circumstance I need to ascertain for different retailers a,b,c,d, etc the shelf price and compare their NTS and % Margin. Whilst I can enter the different prices and change the terms as required, the whole sheet seems to link back to column A rather than simply drawing from the info in each respective column.
a
b
c
Price On Shelf
20.12
20.05
18.87
Shelf Price Excl. GST
17.50
17.43
16.41
[code]....
View 1 Replies
ADVERTISEMENT
Apr 17, 2008
I am working with excel sheets for dimension population of metrics.
I want to make some process less manual. In one column I am given some values like ((1110 + 1230 + 3120 + SERVSELCT) - (1110.21 + 2110.30))
Based on these values I have to write the expanded form like:
The values that do not include the decimals are known as parents, for which I have to write PCYDYNNOTRANS_1110 and for the values that include a decimal I have to write CCYDYNNOTRANS_1110.21
I have to write this in the adjacent column for all the values I had mentioned above.
I was wondering if there is a way that I can make this less tedious, and I can have a list that would pop up in the adjacent column where I could select which one I should use i.e. either PCYDYNNOTRANS_ or CCYDYNNOTRANS_ and I would have to just copy paste the values.
View 9 Replies
View Related
Nov 24, 2008
I'm looking for a formula or code that would take a client's name that appears in one cell, with the last name first then a comma and then the first name, and paste it into another cell with the first name first and then the last name with no comma.
Example: cell A2 contains "Smith, Joseph", cell B2 should have "Joseph Smith". If I need to provide additional information,
View 9 Replies
View Related
Jan 9, 2009
I have a spreadsheet list in the following format (Note Tax ID would be cell
A1, etc):
A B C
Tax ID Numbers Street
11-03-3040-0178-01-794HIGMAN PARK
11-03-2310-0001-00-3100HELMAR
11-03-3040-0169-00-0102HIGMAN PARK
11-03-3040-0165-00-4104HIGMAN PARK
11-03-0020-0039-01-6104S CRYSTAL
11-03-0021-0006-01-9105S EUCLID
11-03-0024-0004-08-8105PAUL
11-03-0018-0029-00-1105HIGMAN PARK
11-03-1880-0069-00-4107S CRYSTAL
This continues downward to cells 6577. I'm looking for a way to carry these three columns over at some point so I can put more data on a single page, thus minimizing the # of pages I will need to print, but yet remain in the proper sequence as established in column B.
View 2 Replies
View Related
Mar 26, 2009
=IF(AND(B3:ZZ3="Jan",B10:ZZ10>=500000,B13:ZZ13="POST"),"1","0")
And I'm pulling from a spreadsheet that looks like this:
Jan[B3], Jan[C3], Jan[D3]
500,001[B4], 632,000[C4], 992,000[D4]
PRE[B5], POST[C5], POST[D5]
(and the function is calculating how many januarys, greater than 500,000 that are also post).. how do i get it to ADD the amount of fields that meet that crieteria instead of giving me a 1? I want it to say "2" (adding together all that meet those needs)
View 4 Replies
View Related
Jan 12, 2010
I have a column filled with names per row. I wanted to standardize it by using the following format.
The comma after the last name is always an indicator to me that it is the last name.
<First Name> <Middle Initial(if any)> <Last Name>
My actual records contains the following:
BIMBO EPPING - OK
AHMAD SADICK - OK
Salana, Laura R - need to be arranged to > Laura R Salana
Cantos, Rhoda Grace J - need to be arranged to > Rhoda Grace J Cantos
View 13 Replies
View Related
Oct 20, 2009
I have two inputboxes. I want to set the default value of the second inputbox as (effectively) one cell down from the first inputbox entry. In other words, if I type G17 into the first inputbox, I want the second inputbox to then have a default value of G18.
View 5 Replies
View Related
Sep 30, 2013
I have a userform that accepts some information and checks to see if the values have already been used (address and work order number) If the value is used the user must change the value ,an input box is triggered to get the new value. My question is how do I transfer the value back to the userform??
View 9 Replies
View Related
Jun 4, 2008
I have 3 pivot tables I'm using a macro to get a value out of, by changing the 2 "Page" fields. However, after the macro's done running, the page fields are messed up. (The order changes, one of the options becomes "").
View 9 Replies
View Related
Nov 23, 2009
I have a filename in the format XXX-YYY-ZZZ.xls, where all the XXX and YYY and ZZZ are of variable length. Sometimes it is of the format UUU-XXX-YYY-ZZZZ.xls
I wish to delete all the characters to the left of the rightmost "-" character, including that "-" character.
View 9 Replies
View Related
Jun 12, 2006
Is it possible to modify a link so that you can change the link easily by the value of a certain cell.
='[Labour Plan Week 24.xls]Hours'!$E$135 and I want something like ='[Labour Plan Week " &H5& " .xls]Hours'!$E$135. Where H5 contains the week number
View 3 Replies
View Related
Aug 7, 2006
Theres a progam created using Firebird as described here: {url}
I want to be able to enter data into the firebird application from an Office application (e.g. Excel) using VBA.
I want to also be able to extract data from the application using VBA.
View 5 Replies
View Related
Jan 25, 2007
I am working on a macro that opens up a workbook, formats the data by moving columns etc and then spits out the data to different workbooks according to a string in col R (M,C,S etc). I am able to split the file into the workbooks, but it copies the whole sheet and not just the visible cells (its working via a filter). I have tried adding code into the loop to basically copy the visible cells to Sheet2 and then delete (or clear) sheet1 so that I only have the relevant data but have very interesting. This is only the first of a few procedures I would like to add within the loop. Ideally I want to have a prompt for the filename and path for each file, and also another procedure to add a number into each seperate file. If I know why I cant get this simple function to run I will, hopefully, be able to add in the other bits!
Function SplitSheets()
On Error Resume Next
Dim ws As Worksheet, source As Range, dest As Range
Dim daily As Worksheet
Dim sType(4) As String
Dim i As Integer
Dim strSaveFileas As String
sType(1) = "M"
sType(2) = "S"
sType(3) = "C"
sType(4) = "N"
Set daily = Worksheets(1)
For i = 1 To 4...................
View 2 Replies
View Related
Jan 31, 2014
I'm putting together a workbook to keep track of income generated from Contractors (I work in recruitment). I have an existing system that displays margin, hours worked and income (margin * hours) but what I am looking for is a neater solution that would still have the margin column, but when hours are entered into a cell it is factored by the margin and displays income in the same cell.
So to be sure I am describing correctly, I am after a formula that will enable me to
1. Enter a value into a cell (for the hours worked - lets call this B1)
2. Multiplies this value by another cell (a fixed amount, the margin - lets call this A1)
3. Displays this result (B1 * A1) in cell B1, the same cell as the hours were entered in.
View 2 Replies
View Related
Mar 27, 2008
I am trying to wrap up a project. The project consists of taking the input values from a userform and entering them into various Word documents and Excel workbooks. The procedure is run from Word. I have no issue completing this part.
However, there are a few Word documents that have an Excel worksheet embedded into them. How can I manipulate these worksheets using VBA? I have attached an example for your reference.
I have found out how to get into edit mode, but I still do not know how to actually edit the worksheet.
View 14 Replies
View Related
Mar 24, 2009
i need to pull data from one spread sheet and place it in a new spread sheet. and i am not that familiar with macros i am learning but i need to get this done.
View 13 Replies
View Related
Nov 19, 2009
A B C D
--------------------
Mike Fax 5 60
John Tel 3 30
Mike Tel 2 30
Mike Fax 1 60
John Fax 1 60
--------------------
hi all, i am faced with the following problem. before i describe the problem, i do not need help with recording a macro or using functions to solve the above problem, i know how to do that.
writing a code from scratch to do the following:
I need a code that will run through the above columns, and IF A=Mike and B=Fax, THEN C*D...so I want to calculate a total for everytime Mike sells a Fax (or a Tel). Column C is quantity, Column D is price.
I am sure this is a simple loop code, but I have spent days trying to figure it out and I can not do it. Recording a macro is useless, because it is too confusing to look at the code and play with it and try to personalize it.
View 14 Replies
View Related
Jan 29, 2010
I have a excel sheet where I have a list of strings seperated by a "-". I am looking to take the particular cell value and swap the characters before the dash with the characters after the dash. So for example:
FG03-FJ04 would become FJ04-FG03
AB02-CD12 would become CD12-AB02 and so forth....
I have tried findling around with the split function but cant seem to get anywhere, does anyone know a tried and tested method of doing this?
View 2 Replies
View Related
Aug 8, 2007
I have a chart that I am trying to set up with dynamic data. I have the chart created, but the problem is that I will have a variable number of categories based on the data that is loaded, so I need to use VBA to change the range for the source data and labels on the fly (otherwise, I will end up with 20-50 categories that are all zeroes, putting a bunch of gobbledegook at the top of the chart).
What commands to I need to enter into VBA to get this to work?
I have put a formula in 2 cells to determine based on the current data what the source data values range should be, and what the category labels range should be.
The cell that holds the value range is Graphics!L6, and the cell that holds the labels range is Graphics!L7.
The current values that these cells hold are:
L6:
=Graphics!$J6:$J9
L7:
=Graphics!$K6:$K9
Oh, and the name of the chart is "Chart 1"
What do I need to put into VBA to get the chart to change the data source values and category labels to the ranges I have listed in those 2 cells? (and for that matter, have I listed the ranges correctly in those 2 cells so that they are usable?)
If possible, I would prefer to do this without having to use code to select the chart, because I want the updates to the chart to be invisible to the user.
View 9 Replies
View Related
Apr 13, 2008
I have a contiguous range of rows starting from row 5. ...It starts from row 5 but could end anywhere below.
The name of my Sheet is Tester.
Now in Tester, columns B,C, and D have numerical values in them. Using VBA, how can put in values in corresponding row of column A.
So if there are values from B1:D39 and B40 onwards is empty, then A1 will have value B1*C1*D1, then A2 will have B2*C2*D2 and so on until A39 = B39*C39*D39
**I need to write the code so the whole process is done fastest.The code may be long but the macro needs to run as fast as possible.
(Also, I remember using Screen.Updating = False when I wrote similar stuff many yrs ago. Would this be useful here?)
View 9 Replies
View Related
Aug 4, 2007
I Am trying to create a pivot table. I have attached a sample of what i want. I have same kind of data for different dates. I would like for one field to list out seperately under each date and one field to sum up for the entire week( Total paid hrs). How do i go about doing this... is there a work around?
View 3 Replies
View Related
Apr 11, 2008
I would like to give credit and thanks to StephenR for producing the current Macros in use on this spreadsheet.
This was to sort out Raw Data that I get from a database, and with lots of help sort it and format so for a history of this you can look there.
Now I need to enter in some formulas, data from another spreadsheet and cell formatting…
Unsure if all this is possible but am hoping some of it is…
First Thing
The column Run Time has the data in them already this is the time in minutes am looking for a way to put a formula in, that will make them into hours so the formula will read like this “=180/60” this will give the number 3 as the whole number.
Second Thing
Using the whole number that the formula made in the Run Time column, am looking to fill cells with colour, too see what I mean here its best to take a look at my mock up spreadsheet.
Third Thing
Two rows below all the data that gets sorted out I would like to put in two totals, one for Run Time and another for Available Hrs “=SUM (Range)”
Forth Thing
I have data in another spreadsheet that is the Resrce Name, and Available hrs am looking to take that data from this spreadsheet that will be closed opened if needed, this data will assign workers to Work Centres.
I would like this to be a separate macro to run though all the sheets if possible.
View 14 Replies
View Related
Sep 16, 2013
This could be a bit complicated, but hopefully also useful for others. We have the following sample of 10 cells from a large file with similar data:
N: 1; B: 162; M: 278, 278; T: 24; A: 103, 105; I: 393; Ḥ: 7240, 7390, 7465, 7546, 7617, 7756, 27399, 8380, 8741, 8894, 8985, 9559, 9671, 9741, 10119, 10211; W: 40; D: 766.
N: 2; B: 246, 889, 1136; M: 255, 255; A: 55; I: 286; Ḥ: 22731, 22802, 22857, 22906, 22948; D: 685.
[Code]...
We want to extract the same letters with its numbers and put the same letters with numbers in one column and do this for all letters, but - this is important - while keeping them in their original row. The purpose of this is addition of data and easy rearrangement of the letter plus numbers order, e.g., to: B M N A T I W D Ḥ. As you can see not all the rows have all letters, nor are the seizes the same. There are thousands of such cells. Some parts are partly in bold, we want to maintain that layout after sorting. Such a thing should be easy for computers, but how could this extraction and manipulation be done (I have Excel 2010)?
P.S. There are two spaces after every ; that were eaten up here.
View 9 Replies
View Related
Mar 16, 2014
Using VBA; How do I copy a formula in a cell to the next row and at the same time incrementing the row numbers in the formula?
For instance: Formula in D1 is = A1 + B1 + C1
Copy the formula in D1 to D2 but then D2 must contain the formula = A2 + B2 + C2
View 2 Replies
View Related
Aug 13, 2009
How to make formula for following situation:
Worksheet1RangeA contains a list of names in A2:A50 with corresponding scores in B2:B50
These values per name should be copied into Worksheet2RangeB, which contains a larger range of names in A2:A100 and scores in B2:B100. The names have a different sequence than Worksheet1.
Is there an IF (or other) formula that can take a scores from Worksheet1, look for the corresponding names in Worksheet2 and copy the Worksheet1 scores into the Worksheet2 column, each for the correct name?
That means every name appearing in Worksheet1 will have a copy operation of the score to its corresponding name in Worksheet2. If a name in Worksheet2 does not appear in Worksheet1, the score colum in Worksheet2 will get 0 or a fixed value, say 25.
View 12 Replies
View Related
May 8, 2007
I have a simple formula which refers to a cell on another sheet which I need to copy down a summary page so that every time I go down 2 cells in my summary it only moves down 1 cell in the sheet it refers to
Example
Sheet1 CellA1 = Sheet2!$A$1
when I copy this formula to Sheet1 CellA2 i need it to be = Sheet2!$A$3
obviously if I took the absolute references off and copied it down it would move 1 cell at a time but i need it to move 2
Not sure if this needs some code to work which I can assign to a Ctrl+? as I need to repeat the copy down over 100 times (however not limited to 100)
View 9 Replies
View Related
Apr 28, 2009
I am trying to copy the following formula down to additional cells
='Drawing 1'!$D$13:$F$13
but each formula must change on each row so would be
='Drawing 2'!$D$13:$F$13
='Drawing 3'!$D$13:$F$13
View 9 Replies
View Related
Sep 20, 2006
I am using a formula to create a value. I copy the information to another sheet and want to sort the data another way. When I sort the data I lose the value. Is there anyway to just copy the value to the new sheet instead of the formula as well.
Sub points()
Range("H2").FormulaR1C1 = "1"
Range("H3").Select
ActiveCell.FormulaR1C1 = "=IF(RC[-1]>=R[-1]C[-1],R[-1]C+1,1)"
Range("H3").Select
Selection.autofill Destination:=Range("H3:H450")
Range("H3:H450").Select
Range("A2:I450").Copy Destination:=Sheets("AllRaces").Range("A1354")
Sheets("AllRaces").Select
End Sub
View 2 Replies
View Related
Aug 1, 2014
I'm building a master data spreadsheet to hold all of our data for the next fiscal year. There are about 300 data elements divided by month (our fiscal year is July-June). The intention is to go in monthly and enter data. How do I create the formulas and then copy them across the rows without getting the #VALUE! error or #DIV/0! error since I don't have data in the columns yet? Ideally, I'd like the formulas to live in the background and have the cells blank until I enter data for the particular month.
If it matters all my formulas are something similar to =IF(B4 = " ", " ", B4) or =IF(B4 = " ", " ", B4/B5)
View 2 Replies
View Related
Aug 20, 2009
How can I copy down an indirect formula? When I copy it the lookup reference doesn't change. My formula is: =IF(INDIRECT("Q1")="",INDIRECT("R1"),INDIRECT("Q1"))
but when I copy down the cell reference stays the same (I need to keep the indirect formula because I'm adding columns in column Q but it needs to reference column Q even when columns are added). From reading through some other posts I believe I need to add a ROW() or COLUMN() formula in there somewhere.
View 5 Replies
View Related
