I'm looking for a formula or code that would take a client's name that appears in one cell, with the last name first then a comma and then the first name, and paste it into another cell with the first name first and then the last name with no comma.
Example: cell A2 contains "Smith, Joseph", cell B2 should have "Joseph Smith". If I need to provide additional information,
I am working on a macro that opens up a workbook, formats the data by moving columns etc and then spits out the data to different workbooks according to a string in col R (M,C,S etc). I am able to split the file into the workbooks, but it copies the whole sheet and not just the visible cells (its working via a filter). I have tried adding code into the loop to basically copy the visible cells to Sheet2 and then delete (or clear) sheet1 so that I only have the relevant data but have very interesting. This is only the first of a few procedures I would like to add within the loop. Ideally I want to have a prompt for the filename and path for each file, and also another procedure to add a number into each seperate file. If I know why I cant get this simple function to run I will, hopefully, be able to add in the other bits!
Function SplitSheets()
On Error Resume Next
Dim ws As Worksheet, source As Range, dest As Range
Dim daily As Worksheet
Dim sType(4) As String
Dim i As Integer
Dim strSaveFileas As String
sType(1) = "M"
sType(2) = "S"
sType(3) = "C"
sType(4) = "N"
Set daily = Worksheets(1)
For i = 1 To 4...................
I'm putting together a workbook to keep track of income generated from Contractors (I work in recruitment). I have an existing system that displays margin, hours worked and income (margin * hours) but what I am looking for is a neater solution that would still have the margin column, but when hours are entered into a cell it is factored by the margin and displays income in the same cell.
So to be sure I am describing correctly, I am after a formula that will enable me to
1. Enter a value into a cell (for the hours worked - lets call this B1)
2. Multiplies this value by another cell (a fixed amount, the margin - lets call this A1)
3. Displays this result (B1 * A1) in cell B1, the same cell as the hours were entered in.
i need to pull data from one spread sheet and place it in a new spread sheet. and i am not that familiar with macros i am learning but i need to get this done.
View 13 Replies View RelatedI have a chart that I am trying to set up with dynamic data. I have the chart created, but the problem is that I will have a variable number of categories based on the data that is loaded, so I need to use VBA to change the range for the source data and labels on the fly (otherwise, I will end up with 20-50 categories that are all zeroes, putting a bunch of gobbledegook at the top of the chart).
What commands to I need to enter into VBA to get this to work?
I have put a formula in 2 cells to determine based on the current data what the source data values range should be, and what the category labels range should be.
The cell that holds the value range is Graphics!L6, and the cell that holds the labels range is Graphics!L7.
The current values that these cells hold are:
L6:
=Graphics!$J6:$J9
L7:
=Graphics!$K6:$K9
Oh, and the name of the chart is "Chart 1"
What do I need to put into VBA to get the chart to change the data source values and category labels to the ranges I have listed in those 2 cells? (and for that matter, have I listed the ranges correctly in those 2 cells so that they are usable?)
If possible, I would prefer to do this without having to use code to select the chart, because I want the updates to the chart to be invisible to the user.
I would like to give credit and thanks to StephenR for producing the current Macros in use on this spreadsheet.
This was to sort out Raw Data that I get from a database, and with lots of help sort it and format so for a history of this you can look there.
Now I need to enter in some formulas, data from another spreadsheet and cell formatting…
Unsure if all this is possible but am hoping some of it is…
First Thing
The column Run Time has the data in them already this is the time in minutes am looking for a way to put a formula in, that will make them into hours so the formula will read like this “=180/60” this will give the number 3 as the whole number.
Second Thing
Using the whole number that the formula made in the Run Time column, am looking to fill cells with colour, too see what I mean here its best to take a look at my mock up spreadsheet.
Third Thing
Two rows below all the data that gets sorted out I would like to put in two totals, one for Run Time and another for Available Hrs “=SUM (Range)”
Forth Thing
I have data in another spreadsheet that is the Resrce Name, and Available hrs am looking to take that data from this spreadsheet that will be closed opened if needed, this data will assign workers to Work Centres.
I would like this to be a separate macro to run though all the sheets if possible.
I am working with excel sheets for dimension population of metrics.
I want to make some process less manual. In one column I am given some values like ((1110 + 1230 + 3120 + SERVSELCT) - (1110.21 + 2110.30))
Based on these values I have to write the expanded form like:
The values that do not include the decimals are known as parents, for which I have to write PCYDYNNOTRANS_1110 and for the values that include a decimal I have to write CCYDYNNOTRANS_1110.21
I have to write this in the adjacent column for all the values I had mentioned above.
I was wondering if there is a way that I can make this less tedious, and I can have a list that would pop up in the adjacent column where I could select which one I should use i.e. either PCYDYNNOTRANS_ or CCYDYNNOTRANS_ and I would have to just copy paste the values.
I have a spreadsheet list in the following format (Note Tax ID would be cell
A1, etc):
A B C
Tax ID Numbers Street
11-03-3040-0178-01-794HIGMAN PARK
11-03-2310-0001-00-3100HELMAR
11-03-3040-0169-00-0102HIGMAN PARK
11-03-3040-0165-00-4104HIGMAN PARK
11-03-0020-0039-01-6104S CRYSTAL
11-03-0021-0006-01-9105S EUCLID
11-03-0024-0004-08-8105PAUL
11-03-0018-0029-00-1105HIGMAN PARK
11-03-1880-0069-00-4107S CRYSTAL
This continues downward to cells 6577. I'm looking for a way to carry these three columns over at some point so I can put more data on a single page, thus minimizing the # of pages I will need to print, but yet remain in the proper sequence as established in column B.
=IF(AND(B3:ZZ3="Jan",B10:ZZ10>=500000,B13:ZZ13="POST"),"1","0")
And I'm pulling from a spreadsheet that looks like this:
Jan[B3], Jan[C3], Jan[D3]
500,001[B4], 632,000[C4], 992,000[D4]
PRE[B5], POST[C5], POST[D5]
(and the function is calculating how many januarys, greater than 500,000 that are also post).. how do i get it to ADD the amount of fields that meet that crieteria instead of giving me a 1? I want it to say "2" (adding together all that meet those needs)
I have a column filled with names per row. I wanted to standardize it by using the following format.
The comma after the last name is always an indicator to me that it is the last name.
<First Name> <Middle Initial(if any)> <Last Name>
My actual records contains the following:
BIMBO EPPING - OK
AHMAD SADICK - OK
Salana, Laura R - need to be arranged to > Laura R Salana
Cantos, Rhoda Grace J - need to be arranged to > Rhoda Grace J Cantos
I have two inputboxes. I want to set the default value of the second inputbox as (effectively) one cell down from the first inputbox entry. In other words, if I type G17 into the first inputbox, I want the second inputbox to then have a default value of G18.
View 5 Replies View RelatedI am unsuccessfully trying to manipulate and copy a formula.
Column A would typically be used as a benchmark for one retailer and have the base price with the other columns simply showing differences in margin etc if the price was changed. This would typically mean the BWP and fixed terms etc would be constant.
However in this circumstance I need to ascertain for different retailers a,b,c,d, etc the shelf price and compare their NTS and % Margin. Whilst I can enter the different prices and change the terms as required, the whole sheet seems to link back to column A rather than simply drawing from the info in each respective column.
a
b
c
Price On Shelf
20.12
20.05
18.87
Shelf Price Excl. GST
17.50
17.43
16.41
[code]....
I have a userform that accepts some information and checks to see if the values have already been used (address and work order number) If the value is used the user must change the value ,an input box is triggered to get the new value. My question is how do I transfer the value back to the userform??
View 9 Replies View RelatedI have 3 pivot tables I'm using a macro to get a value out of, by changing the 2 "Page" fields. However, after the macro's done running, the page fields are messed up. (The order changes, one of the options becomes "").
View 9 Replies View RelatedI have a filename in the format XXX-YYY-ZZZ.xls, where all the XXX and YYY and ZZZ are of variable length. Sometimes it is of the format UUU-XXX-YYY-ZZZZ.xls
I wish to delete all the characters to the left of the rightmost "-" character, including that "-" character.
Is it possible to modify a link so that you can change the link easily by the value of a certain cell.
='[Labour Plan Week 24.xls]Hours'!$E$135 and I want something like ='[Labour Plan Week " &H5& " .xls]Hours'!$E$135. Where H5 contains the week number
Theres a progam created using Firebird as described here: {url}
I want to be able to enter data into the firebird application from an Office application (e.g. Excel) using VBA.
I want to also be able to extract data from the application using VBA.
I am trying to wrap up a project. The project consists of taking the input values from a userform and entering them into various Word documents and Excel workbooks. The procedure is run from Word. I have no issue completing this part.
However, there are a few Word documents that have an Excel worksheet embedded into them. How can I manipulate these worksheets using VBA? I have attached an example for your reference.
I have found out how to get into edit mode, but I still do not know how to actually edit the worksheet.
A B C D
--------------------
Mike Fax 5 60
John Tel 3 30
Mike Tel 2 30
Mike Fax 1 60
John Fax 1 60
--------------------
hi all, i am faced with the following problem. before i describe the problem, i do not need help with recording a macro or using functions to solve the above problem, i know how to do that.
writing a code from scratch to do the following:
I need a code that will run through the above columns, and IF A=Mike and B=Fax, THEN C*D...so I want to calculate a total for everytime Mike sells a Fax (or a Tel). Column C is quantity, Column D is price.
I am sure this is a simple loop code, but I have spent days trying to figure it out and I can not do it. Recording a macro is useless, because it is too confusing to look at the code and play with it and try to personalize it.
I have a excel sheet where I have a list of strings seperated by a "-". I am looking to take the particular cell value and swap the characters before the dash with the characters after the dash. So for example:
FG03-FJ04 would become FJ04-FG03
AB02-CD12 would become CD12-AB02 and so forth....
I have tried findling around with the split function but cant seem to get anywhere, does anyone know a tried and tested method of doing this?
I have a contiguous range of rows starting from row 5. ...It starts from row 5 but could end anywhere below.
The name of my Sheet is Tester.
Now in Tester, columns B,C, and D have numerical values in them. Using VBA, how can put in values in corresponding row of column A.
So if there are values from B1:D39 and B40 onwards is empty, then A1 will have value B1*C1*D1, then A2 will have B2*C2*D2 and so on until A39 = B39*C39*D39
**I need to write the code so the whole process is done fastest.The code may be long but the macro needs to run as fast as possible.
(Also, I remember using Screen.Updating = False when I wrote similar stuff many yrs ago. Would this be useful here?)
I Am trying to create a pivot table. I have attached a sample of what i want. I have same kind of data for different dates. I would like for one field to list out seperately under each date and one field to sum up for the entire week( Total paid hrs). How do i go about doing this... is there a work around?
View 3 Replies View RelatedThis could be a bit complicated, but hopefully also useful for others. We have the following sample of 10 cells from a large file with similar data:
N: 1; B: 162; M: 278, 278; T: 24; A: 103, 105; I: 393; Ḥ: 7240, 7390, 7465, 7546, 7617, 7756, 27399, 8380, 8741, 8894, 8985, 9559, 9671, 9741, 10119, 10211; W: 40; D: 766.
N: 2; B: 246, 889, 1136; M: 255, 255; A: 55; I: 286; Ḥ: 22731, 22802, 22857, 22906, 22948; D: 685.
[Code]...
We want to extract the same letters with its numbers and put the same letters with numbers in one column and do this for all letters, but - this is important - while keeping them in their original row. The purpose of this is addition of data and easy rearrangement of the letter plus numbers order, e.g., to: B M N A T I W D Ḥ. As you can see not all the rows have all letters, nor are the seizes the same. There are thousands of such cells. Some parts are partly in bold, we want to maintain that layout after sorting. Such a thing should be easy for computers, but how could this extraction and manipulation be done (I have Excel 2010)?
P.S. There are two spaces after every ; that were eaten up here.
I have an origin and destination matrix with one set of zones and need to convert it to another set of zones. This involves combining some zones together. I tried a sum if, but it didnt work. I have done the calcs individually but will have to repeat the process so was looking for a wuicker, more efficient and less error risk!
Just to clarify, I have to convert a 23 by 23 matrix into a 14 by 14.
I have a column line chart to which I add data monthly and then have to manually update the "source data" to reflect the added data on chart. This is a rolling graph, which mean that I have to remove data for one month(from last year) and then include the new month's data. Is there any way on automating this process...like a macro or something, so once I add the data excel automatically removes one month of old data and make changes to include fresh data. Eg Currently chart is based on data from A2:F2 and I add new data to cell G2. I need something which automatically update the source data to cell B2:G2.
View 4 Replies View RelatedI have one source spreadsheet, where are columns NAME, DATE. I read these data by ADO to other spreadsheet, where I can change/delete data and then run macro for update data in source spreadsheet. The problem: In source spreadsheet is column "NAME" and column "DATE", with values e.g. "Joseph"; 1.1.1980. I read this data to other spreadsheet, then I delete in it value 1.1.1980. When I run macro Update, it messages error.
Sub UpdateItem
...
.Fields.Item(1).value = activecell 'activecell value = "Joseph"
If Not isempty(activecell.offset(0,1)) Then
.Fields.Item(2).value = activecell.offset(0,1).value
Else
.Fields.Item(2).value = "" 'I tried Empty and 0 too but when I read data again then, it displays 0.1.1900, nothing works
End If
...
End Sub
It seems that in source spreadsheet has data in column "Date" format Date and when I try to update data in format String ("") in source spreadsheet by Update macro, it messages error. When I used
.Fields.Item(2).Value = Empty
' or
.Fields.Item(2).Value = 0
after rereading data it displays 0.1.1900 What I want to get is that if the cell with date (in other spreadsheet) is empty, the cell in column Date in source spreadsheet after updating will be blank (contains no values).
I am trying to create a user form that will allow the user to type int values in boxes. Then when the user clicks the submit button the code needs to add the values from each user input box to the existing values in specific cells accross multiple worksheets. Then the form needs to be cleared after the cell values are updated. I can create the form it is the code on the submit button i am lost on. Also it is important that some boxes may be left blank.
If you click the Grey "Qty Form" button on sheet1 the form will open. User data numbers can be entered in the blank boxes. When the submit button is pressed the form needs to add the user entered numbers to the numbers in the corresponding cells in sheet 1 and sheet 2. How to code the submit button to do this properly. Also after the data on the spreadsheet is updated the form needs to be cleared and start the cursor back in the Item 1 box on the form.
- I have total of 13 sheets in a workbook - 12 sheets represent 12 months with data; 13th sheet is single sheet in which i would like to get complete overview of 12 months
- each of 12 sheets has actually sales results for multiple products with following data: internal code, manufacturer part number, name, and qty sold in that month
- situation is that some products have been phased out during the year and some were introduced so each sheet is slightly different in terms of in which row certain product is located
What i would like to achive is to make 13th sheet (whole year overview) do the following:
- there is a list of all the products in it, each product has unique internal code - this code (from each line) should be used to find that code in each monthly sheet, then find its monthly sales value (copy it) and paste it in sheet 13 in cell that represents this product and particular month.
In other words i would like to see for each product what was monthly sales throughout this year, but avoid manually filling in qty for each product per month.
I have attached a sheet that has part of a data list, sheet called (Full Data) what i am trying to do is seperate the data into event locations into individual sheets.
The data ref will be column F which is the different event locations.
I thought the best way to try and do this was to create an if/ match formula using the sheet tab names as the if match, with the event locations in column F.
I have added two sheet tabs so you can see that i require the data for (Ain) to be put into the Ain sheet.
The data list in Full Data sheet will be continuously updated so i will need the range to be around 10,000 entries.
I am attempting to create a macro to generate emails based on data in a sheet. The goal is to run the Macro, and have it generate emails to send to contractors letting them know what they are going to be paid. For instance:
Name in Column J
Email in Column L
Memo in Column N
Balance in Column T
Due Date in Column P
Week Ending Date in Column H
Now what I would like to happen, is to tie a macro into a button that will create the email as follows:
To Field: Email address from Column L
Subject: "Company Payment Remittance Payment Date *Date from Column P*"
Body: Hello *Name from Column J*,
For *WE Date in Column H* you will be paid *Balance from Column T* for the time worked of *Memo in Column N*
Now the tricky part is that I want the email to contain all line items for each email address. So instead of sending one email per line, have the macro automatically put all of the information that needs to be sent to one email address into the message. I don't know if that is possible, but it sure would make my life easier if it was.
I have attached a sample workbook of the data that will be used
Example Workbook for Email Macro.xlsx
