VBA Copying Filtered Lists

Feb 13, 2014

I have the following code, which adds a column to some data, and counts duplicated. It then filters the list, and copies it to a new sheet.

Code:
Sheets("Sheet4").Select
Range("F1").Formula = "Duplicate?"
lastrow = Range("A" & Rows.Count).End(xlUp).Row
Range("F2:F" & lastrow).Formula = "=countif(d$2:D2,D2)"

[Code] .......

This works fine except for if there is no Data.

If there is no data in "sheet 4".

How can i get it to skip the copy/paste when lastrow = 0?

View 3 Replies


ADVERTISEMENT

VBA Copying Filtered Lists?

Jan 28, 2014

I have the following snippet of code which runs a filter on a list and copies the filtered values to the first available row on another sheet.

However, i get an error when there is no data after the filter. How can i change the code so that if there is no data, it simply moves onto the next line.

Here's my code:

Code:
Sheets("Sheet4").Select
lastrow = Range("A" & Rows.Count).End(xlUp).Row
Range("F2:F" & lastrow).Formula = "=countif(d$2:D2,D2)"
ActiveSheet.Range("$A$1:$F$" & lastrow).AutoFilter Field:=6, Criteria1:=">1"
Range("A2:F" & lastrow).Select
Selection.SpecialCells(xlCellTypeVisible).Copy
Sheets("Sheet6").Select

[code]....

View 2 Replies View Related

Comparing Filtered Lists

Jan 20, 2007

I'm trying to compare filtered lists across several worksheets. What I'd like to do is:

1) compare the filtered list from Sheet 1 with the filtered lists from Sheets 2-5, and if an item from Sheet 1's filtered list appears on ALL the other filtered lists, said item will be pasted to a new list on Sheet 6, under the heading "Sheet 1".

2) I need to do this for every item on every filtered list, ultimately creating five new lists on Sheet 6 (i.e. after going through sheet 1's filtered list, move on to sheet 2 and compare each item to Sheets 1, 3, 4, 5, and qualifying items pasted in Sheet 6 under heading "Sheet 2", etc.).

View 9 Replies View Related

Only Copying Filtered Data

May 3, 2013

I'm struggling with a function I wrote that I intended to filter out the blanks in a column, then only copy the results that aren't blanks to another sheet. The code below copies all data which I don't want. I know I need to be more specific in what range to copy, but I've tried various things but get compile errors.
Code:
Sub createMaterialRequisitionButton()
Worksheets("Material List").Range("$A$19:$E$500").AutoFilter Field:=1, Criteria1:=""

'COPY QUANTITY TO MATERIAL REQUISITION
Worksheets("Material List").Range("A19:A500").Copy
Worksheets("Material Requisition").Range("$A$12").PasteSpecial Paste:=xlPasteValues
End Sub

View 3 Replies View Related

Copying Filtered Data

May 11, 2007

I would like to change the code below so instead of copying the whole column it only copies the items visible (i.e. they have been filtered in a couple of different columns).

For Each rngData In Range("E4:CR258").Columns
rngData.AutoFilter Field:=1, Criteria1:="<>"
rngData.Copy
rngData.EntireColumn.Cells(263, 1).PasteSpecial xlPasteValues
rngData.AutoFilter
Next

View 3 Replies View Related

Copying And Pasting A Filtered Area

Feb 28, 2007

i have a huge table which i've filtered for a value in a column. my data has been reduced from 20000 to 100.

how can i copy and paste ONLY the values for those 100 rows? (4 columns and 100 rows)

everytime i do it, it copies all 20k rows!

View 9 Replies View Related

Copying Filtered Data Columns To New Spreadsheet

Oct 14, 2008

I have a spreadsheet with two tabs (Customer Survey Data) and (Customer Rollup). The data starts on line 5 (headers in rows 1 thru 4) and is found in columns B thru J. In column B I have dates with no blanks. In column C I have customer names - no blanks. In column J is are the customer comments - not all customers made a comment so there are blanks.

I created a macro that autofilters the data to show only those entries within a specific date range (dictated by dates found in L1 and L2 - begin and end dates respectively) by column B (no problem with this). The macro also auto removes all rows where there are no comments (column J = no blanks). This leaves me with only those surveys recieved within a specied date range that have comments.

Here is my problem: the Customer Rollup sheet is the finalized report. I need to copy only the customer names and their comments into the finalized report. The following is the macro I put in which only half works and I have no idea why. It copies the names fine...but then only copies the first comment.

Oh yea...I don't want to copy the WHOLE column...only from the first visible row down to the last. Btw...I put a lot of notes for myself...I capitalized the notes where I think the problem is...Any suggestions on how to fix it or why it just doesnt seem to work like it should?

View 5 Replies View Related

Copying Information To Multiple Cells And Updating Lists

Apr 29, 2009

ive had to retype this so please bear with me. ive utilised the resources of this site before but ive come to the time where i need to ask a question of my own.

now i will refer to my attached document as what im trying to achieve.

my project is to create membership cards for our social club at work, out of a list of people we have on our manifest.

If you refer to column A, this is where i will dump the manifest of members as time progresses (keeping in mind that more names will be added to this list as it goes).

What i am hoping to achieve, is to start at Cell A2 (highlighted in yellow). For the example the membership name is "a". i want to hit the macro button and the following will occur.

1. data "a" from Cell A2 will be copied to B2 (highlighted in green) and G6 (highlighted in blue). This moves the name from being on the unregistered list over to a membership card and to the registered list, which allows me to cross check that im not doubling up on names with new applicants and current members.

2. once this occurs, i was cell A2 to delete and cell A3 to be moved up, so now, cell A3's data "b" (highlighted in orange) will be moved to A2.

3. a similar process as point 1 will now occur, where A2 will be moved to the highest empty cell in Column B, which would be B3 now. It will also copy to G18 into the 2nd membership card.

4. this process occurs until column A is empty in A2.

5. i wish to really only have an A4 page worth of membership cards before i print, so i wish to be able to "reset" the membership card boxes, so that instead of the membership cards continuing all the way down the worksheet, it will do say 12, then print, then start back in the 1st box. Ideally this is a loop so that it occurs until there are no more names in Column A.

This is a huge feet for me as an idea because ive never gone beyond using basic recorded macros, however im the type who just HAS to learn how to do stuff, so i will lap up any information or assistance i can recieve from anyone here.

View 11 Replies View Related

Add Or Remove Info To Two Lists In Sheet1 And Sheet2 And Difference Between Two Lists

Mar 29, 2014

My problem in the given excel file

1. Sheet1; how to Add "B000" in the List A or "B00" if the digits and 5 in the list
2. Sheet2; how to remove "B000" or "B00" from the list
3. Sheet3; how to highlight difference or find out the difference between to lists

Update_List.xlsx

View 10 Replies View Related

Lists, How To Make Drop-down Lists Optional

May 13, 2009

Is there a way to make a drop-down list optional? When I create drop-down lists the user has to make a choice from that list.

Example: a list of doctors. I need the user to be able to select from that list if the patient saw one of those physicians, but if the patient saw another doctor not on the list, I need the user to be able to enter the name of that other doctor. Currently the user has to select from the list or not enter a doctor. I am using Excel 2003.

View 2 Replies View Related

How To Copy Filtered Data Into Filtered Data

Aug 19, 2013

Is it possible to copy data that has been filtered on one tab into filtered data on another tab? I've attached an example, i'm trying to copy the values from column C on the 'From' tab to column D on the 'To' tab. I think the data is always going to be an exact fit in terms of the number of cells copied from and to.

View 1 Replies View Related

Copying And Pasting Current Region To Another Sheet Without Actually Copying?

May 15, 2014

I want to copy the current region on sheet 3 and paste that into sheet2 starting with cell E4. But I don't want to actually use the copy method. I believe there is a way to do this. I was thinking the following:

[Code] ......

The idea I had was to simply state that cell E4 would be assigned the value of CurrentRegion on sheet 3. Is there a way to bypass the copy method?

If not, how to copy, then paste?

View 2 Replies View Related

Copying From Hidden Cells Are Not Copying Protected

Dec 12, 2007

I am trying to make the cells Iam am copying paste hidden cells with all formats - seems to work fine other than the security part of them, Iam makeing a sheet for work and just trying to make it were it will not get destroyed by other users-

View 12 Replies View Related

Table Copying Formulas But Not Copying Value

Apr 27, 2014

i have created a table. when i m editing new row then formulas is copying bu value is not copying ?

View 3 Replies View Related

Sum Up Filtered Data Only?

Jan 2, 2014

I have been trying to find a way to sum up/only show the filtered data in a sheet.

i want to beable to filter the data by year and then only show sum up the data shown not
the entire column, is there a formula that will let me do this?

View 3 Replies View Related

AutoFilter Is ON But Not FILTERED

Apr 16, 2014

I have a situation - where I have a table and a "eSubtotal" cell that basically shows the subtotal value when Autofilter is ON and a SUMIFS calculated value when Autofilter is OFF. I have written this in the Selection change event of the sheet.

For this purpose, I have perform a regular check of AutoFilterMode = true or false and based on this result, I change the formula in the cell, eSubtotal.

Now the challenge is, I don't want to apply SUBTOTAL formula when AutoFilter is ON but there is no filter in any of the columns. I want to keep the SUMIFS just like that in this case.

So far, no good luck..

View 1 Replies View Related

SUM Of Filtered Results

Feb 2, 2009

I have a monthly work phone bill which I receive as an Excel document. I have to pay for personal calls and want to create a list of personal numbers which can be filtered and the costs summed. Prefereably an add in would be best. Possibly 2 icons, one for adding my personalised numbers (usually under 10 numbers). This could be saved to my home drive on the network so I can run the formula from any PC on the network.

The other icon would be to run the report and do the calculations. So it only really looks in 2 column (mobile num, cost).

View 14 Replies View Related

VBA: Sum Of Filtered Cells

May 1, 2007

I have several columns on a worksheet that have an auto-filter on top of the column. The last column has numerical data.

I was wondering if there was code when:

As soon as you filter a column the last column would only indicate the data pertaining to whatever was filtered. I would like the sum of that data only. (Visible data) on a pop message box or anywhere on the sheet...

View 9 Replies View Related

Filtered Reports

Nov 13, 2008

I'd like to created a 'Filtered Report' in which data changes based on my selection. For example, in this scenario I have 2 columns, 'Part Type'(you may pick Part1, Part2, Part3) and the 'Results' columns. I have displayed 100 entries(which means at this point they're all displayed, no filters).

When I apply the filter, and I choose Part Type to display Part1 and its "Results', I would like to dynamically be able to display somewhere in that Sheet something like this:

Part Type: Part1
Total: This would be a =sum(of the 2 cells below, in this case it'd be 17)
Pass: 14
Fail: 3

But I'm not sure how to dynamically count it based on what I've filtered, so when I change to Part2, it would give me:

Part Type: Part2
Total: This would be another =sum of the 2 cells below
Pass: 25
Fail: 4

View 9 Replies View Related

Delete A Filtered Row

Feb 15, 2009

I use a filter to isolate one particular row of data. This unique row of data is data to be updated. There is ever only one record filtered, and that record is dynamic from the database of over 500 rows. Row 1 is the header. The filtered row is displayed under row 1 (physical row 2), but can be any of the row numbers according to the filter results. (ie the filter has extracted record (row) 13, and is displayed on physical row 2 below the headers)

How can I delete this filtered row. I can't simply

rows("2:2").Select
Selection.Delete
as this deletes record (data row) 2, not the 2nd physical row. I need to delete 2nd physical row regardless of the value determined by the filter.

View 9 Replies View Related

Get Average Of Filtered Data?

Apr 7, 2014

I have a pivot table with multiple supervisors and emloyees, I need to be able to find the average of a supervisors department and compare it with an employee with the employee seeing everyone else's data.

I don't have access to the original data that drives this pivot table. Is there some way I can use a calculated field to contain the average performance of all the employees under this particular supervisor?

View 3 Replies View Related

Count Filtered Value If Greater Than 0?

Apr 11, 2014

I count D5:D54 filter data but i want count only when value is greater then 0(zero)

[Code]....

I Mean:

d5 = 0 don't count
d6 = 0 don't count
d7 = 0 don't count

if d5:d54 has value greater then 0 then count...

View 6 Replies View Related

Sum Up Numbered With Filtered Dates?

Jan 2, 2014

1) I would like to be able to filter dates of column B (exemple from 01.01.2014 to 01.03.2014) and that the sum "Invoice Amounts" from these dates ONLY add up in cell G2.

2) I also want cells C2 & D2 to be used in the formula instead of having to select dates manually in column B.

View 6 Replies View Related

How To Run Countif On Filtered Column

Jan 6, 2014

I need to run a countif on a filtered column - How do I do this?

View 5 Replies View Related

Summing A Filtered List?

Feb 18, 2014

I am trying to sum a filtered list and when a filter changes I want the sum to change and it isn't right now. I have attached a TEST workbook in which all the data is values but in my situation all of the data is actually read from a workbook from each agent.... not sure if that matters.

If I filter by District (East or West), how would I get the total to change? I am trying to avoid any vba or macro within this workbook.

View 4 Replies View Related

Filtered Data Into New Worksheet

Mar 23, 2014

In Worksheet A I have hundreds of Rows... Column 2 has a Type in it and not all rows will have a type and then there are various data elements in column 3, 4, 5 and 6

What I would like to do is in a worksheet B have a formula on each of the cells on a row that would look to worksheet A and would find the first row to match the type value in column 2. I would then want to lookup the value of column 3, and 4, and 5 and 6. Then in worksheet B, the next row the formulas in the cells that would also match type and would continue with the NEXT row in worksheet A that matched the type and again retrieve the appropriate cells. It would continue stepping through the rows of worksheet A until I had all of the now displayed in worksheet B

Basically I want to built a subset of worksheet A into worksheet B using the value of the Type column in worksheet A.

I suspect I am going to need to use multiple forumulas nested together in some way to achieve this.

View 3 Replies View Related

Printing Filtered Sheet?

Apr 16, 2014

I have a spreadsheet that has a macro that hides all columns that have 0 in a sum cell. I want to automate printing of the result, there will always be 35 rows but the number of columns will vary, could be 10 could be 30. The cells are hidden not deleted. How can I set up print code to print all visable cells? I need then all to be printed on the one page so scaled to fit.

I tried to record a macro but as the column count varies I get lost....

View 5 Replies View Related

How To Rank Within A Filtered List

Apr 14, 2005

I'd like to have a dynamic report that ranks my lists based on an autofiltered list. In other words, I'd like to toggle the criteria that qualifies the lists content, and have excel generate "ranks" based on the values returned. Currently the rankings are based on the overall list, includeing the records that are filtered out.

View 4 Replies View Related

Rank Filtered Results

Sep 18, 2009

How do I rank filtered results? I do not wish to use VBA if possible.

View 4 Replies View Related

Filter Top 10 Of Filtered Data

Apr 21, 2013

Is it possible to filter a top * for already filtered data. E.g, i have sales people each having their total sales per month , what im trying to achieve is when i filter for only 1 person i want to get the top 10 sales months for that person.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved