I have been searching for quite a while now and cannot figure this out. Basically I have a label named lblCountdown, and that is where I am stuck. Every Do loop, example code, whatever I try won't work. I want a countdown for 10 seconds in my form. The form should show the countdown.
View 6 RepliesI have a value of 0:01:20.555 in a cell in the form of hh.mm.ss.111 and I want to get the adjacent cell to display that value in just seconds (ss.11 to be precise).
So say for example I used 0:01:20.555 (1 minute and 20.555 seconds). So the 1 minute is 60 seconds, so overall the time in seconds would be 80.55 (I need to round off to 2 decimal places instead of the previous 3).
Examples:
0:01:20.555 becomes 80.55.
01:00:00.000 becomes 3600.
0:02:01.111 becomes 121.11
How this can be done for a whole set of data
Is there a way for a form (I am using it as a warning dialog) to show for X seconds (10 or 15) and then hide or hide upon user selecting button to hide it?
I have noticed that if the user form is active then an error comes up when a script tries to run.
I have the following code that displays a form at a user defined time and if the user does not press "Stop" then the workbook saves and closes. The user can press stop then the workbook remains open.
Here is what I have where:
Admin_Auto_Shutdown = Yes or No
Admin_Auto_Shutdown_Time = 3:34pm or user defined time (This doesn't seem to work??)
'Auto Shutdown CloseandSave
If UCase(wb.Worksheets("Admin"). Range("Admin_Auto_Shutdown").Value) = "YES" Then
Application .OnTime TimeValue("Admin_Auto_Shutdown_Time"), "AutoShutdown"
End If
Sub AutoShutdown()
Application.OnTime TimeValue("Admin_Auto_Shutdown_Time"), "AutoShutdown"
Auto_Shutdown_Form.Show
End Sub
Now, my question is about a timer that I can show on a form. When the form is displayed I would like to give the user 30 seconds to press stop (and keep the workbook open) or to press proceed and save and close or to not do anything and the workbook would close and save when the timer reaches zero.
Code for user form which is missing most everything...
Private Sub Halt_Click()
'If user whats to continue without closing
Auto_Shutdown_Form.Hide
End Sub
Private Sub Proceed_Click()
'If user whats to save and close
Auto_Shutdown_Form.Hide
How do I add a timer to this code where it will run this at the end of the timer?
Auto_Shutdown_Form.Hide
Application.DisplayAlerts = False
With ThisWorkbook
.Saved = True
.Close
End With
I want to change 1 minute 24 seconds and 5 tenths into a seconds number. So basically it would come out as 84.50 seconds.
View 4 Replies View RelatedHow can I Convert Decimal Minutes & Seconds To Total Seconds?
Here is the sample
I trying to figure a formula to convert time on a phone call eg. 01:01:21 into total seconds (3661). Phonecalls will never be more than an hour long but the spreadsheet I will be supplied with (havn't got it yet!) will display them in the 00:00:00 format.
View 5 Replies View RelatedIs there an easy way of converting seconds from using a time into hours, minutes, seconds
View 9 Replies View RelatedHow would I go about converting - for example:
0:22 (formated general) to a number = 22
or
1:30 (formated general) to a number = 90
I am trying to convert a number of "hours" "minutes" and "seconds", to give me a result in seconds only, in order that I may then financially cost the amount of time spent on a task. (A time and motion costing exercise)
Example:
1119:48:06
Represents 1119hours:48minutes:36seconds spent on a task.
I can manually convert this to 4031286 seconds, but it just takes too much time !!!(sorry!)
The data is extracted from a database which is unable to split the hours,minutes,seconds into seperate fields, which prevents me from using three cells in excel.
I have a spreadsheet that imports data relating to phone call durations. The information imports as a total number of seconds taken.
What I need to do is to change that number of seconds into hours, minutes and seconds.
Changing the format of the cells doesn't work.
I've tried everything I can think of, and run out of ideas.
example:
23 needs changing to 00:00:23
96 needs changing to 00:01:36
268 to 00:04:28
9374 to 02:35:14
I have been trying for the last two weeks to convert a list of seconds into minutes and seconds, but just can not do it?
Below is an example of my raw data, that I need to convert into minutes and seconds:
120000
120000
120000
2880000
480000
[code].....
really i didnt understand this following post. http://www.excelforum.com/excel-misc...-in-excel.html. as i told u before i am not a Professional in excel. i will undestand when u guys r providing attach files othewise good examples.
View 2 Replies View RelatedHow to add a countdown timer with start, stop, reset functions to an existing Excel spreadsheet?
View 14 Replies View Relatedin the status bar in the bottom left once the workbook is opened is want it to say
## Seconds Remaining Before Workbook Auto Closes
as for the ## I want it to countdown from 60 seconds
I'd like to create a countdown timer to the nearest second for a project deadline. At present I have a simple formula stating the number of days, but would like it a lot more detailed.
View 1 Replies View RelatedI need help figuring a way to show what I have left on a spreadsheet. Please see the following thread with attachments in them.
[url]
how to modify, other than one piece) for a simple countdown timer to place on a userform. On my form if a user clicks a check box I display a label that shows a count down from 300 to 0 (best/simplest code I could find to modify for my purposes). But I'd rather it look like a timer counting down from "00:05:00" to "00:00:00".
Code:
Private Sub PPackCall14_Click()
'lbCountDown, lbMinutes
If PPackCall14 = True Then
Dim i As Integer
Select Case lbMinutes.Value
Case ""
[code]....
I have a countdown in my work sheet that counts 30 days from today if Cell A11 has a value and the date is in B11. Below is the function.
=IF(A11"",B11+30-TODAY(),"")
I love the function above because it counts in reference to a value. I would like something like this function but I want it to countdown 24 hours and not 30 days from today.
I am trying to stop a countdown of days when a value is entered into an adjacent cell. I have the following formula in E4:
=IF(NOW()<D4,DATEDIF(NOW(),D4,"D"),-DATEDIF(D4,NOW(),"D"))
I want this countdown to stop when I enter a date into F4 and that the number of days still shows within E4.
I need to list multiple items that end in, example:at time entered there is 45:14:50 = Hr:Mn:Sec to completion, and would like the date and time of completion or just a countdown to 0 would work. I will have 60 to 70 items running at the same time with different start times and lengths. Picture queueing up items at different times to complete in different length of time and I need to be ready when each item is done. I know this is an Excel forum but I also use Apple Numbers so if either one works better I'm fine with that.
In the attached file, column R is the start time that I enter that needs to be calculated to column S. When I enter an item that takes 54hrs 23min 45seconds to complete, what date and time will it be ready.
The idea is that when they enter the date they recieved their PDR it auto posts the date it needs re doing in column C. To emphasise it and make it easier i am trying to use the formula is part of conditional formatting so that the spreadsheet goes green when date entered, orange when there is 30 days till renewal and red when its over due. I've been trying formulas such as =c2-today()<30 in the conditional formatting box but i cant seem to get it to work.
View 3 Replies View RelatedA countdown timer (MM:SS) all in A1. Need keyboard control to PAUSE and STOP. The mouse will be otherwise occupied and its use cannot effect the timer in any way. Easy way to set the timer.
*Most periods are 2:00 but overtime periods are either 1:00 or :30, depending. Also, consolation matches usually follow a 1,2,2 format, so I will need a system to be able to reset the timer to any of these easily.
I have this formula counting down days until my next fire drill:
[Code].....
However... Every time the drill is done I need to change the date in the formula for the countdown. That I can have it reference a cell instead?
My initial idea was a formula like this:
[Code] .....
(however this code doesn't actually work ...).
I need to calculate how much time I've got left before the earliest order needs to be despatched (it might be 2 or more on every day). This wouldn't be a problem if orders would be placed daily. But for every item it varies. For example: for "X" product there is an order in 3 days time to be despatched at 19:00. I have built a live clock in the spreadsheet but I can't work out the formula.
P.S. Also I need two time formats, first - days(text) hh:mm second - just a numeric value that can be formated as [hh:mm].
Is there a timer function in which i can have a countdown in seconds in a single cell in MS excel?
View 2 Replies View RelatedI'm playing a game that requires me to keep track of money that is increased by a variable amount (pre-calculated and in a cell) and in a fixed time interval of 51 minutes weather I play it or not so I want to be able to keep track of the progress of the money gain outside of the game.
So, I need to know the macro coding for a real time counter that will increase the total money amount in one cell based on the variable income (declared in another cell) in the 51 minute intervals.
now... I also need excel to keep track of the value increase even if excel is closed (by the difference in time from when excel was closed last).
I have a excel sheet that I have created, on this sheet I have 50 rows. I wish to have each row have a 15 minute count down timer on it. I wish to be able to start each one at different times. I wish to also be able to stop and reset each one as needed. I would also like to have each one give a signal sound or a pop up come up and say some thing like "row 5 completed". I have found and am able to get the multiple count down timers on the sheet but they do not start and stop individually. You can start one but once you start the next one the first one will stop running.
View 1 Replies View RelatedI have a macro that runs through about 40,000 records which can be quite time consuming. I currently have a status bar that shows the percent of work complete, but I'd like to add something that shows an estimate of how much time is remaining and how much time has passed. Below is the first loop in my code that uses the progress bar. You'll see that I modified the progress bar to include "Label 2" which shows the current record of the total record count, I'd like to add "Label 3" to show something like "2:30 elapsed, 1:15 remaining".
I'm using Excel 2010 on Windows 7 (64 bit).
HTML Code:
Sub IdentifyGS()
POData.Activate
For CurrentRow = 2 To LastRow
[Code] .......
I am trying to get the results of the number of days between today and a future date. I am using ="cell containing futuredate"-today() and it gets me the correct number of days. The problem comes in when I have yet to populate the future dates. I am getting -39991 (numeric value between today and jan 01 01) and because I am also using conditional formatting this is even more of a problem. Is there a way get excel to display nothing if it is a negative number? or to give a specified resut if the number becomes negative such as Expired or something of that nature?
View 3 Replies View Related