Time To Completion Countdown Timer

May 8, 2014

I need to list multiple items that end in, example:at time entered there is 45:14:50 = Hr:Mn:Sec to completion, and would like the date and time of completion or just a countdown to 0 would work. I will have 60 to 70 items running at the same time with different start times and lengths. Picture queueing up items at different times to complete in different length of time and I need to be ready when each item is done. I know this is an Excel forum but I also use Apple Numbers so if either one works better I'm fine with that.

In the attached file, column R is the start time that I enter that needs to be calculated to column S. When I enter an item that takes 54hrs 23min 45seconds to complete, what date and time will it be ready.

View 9 Replies


ADVERTISEMENT

Real Time Countdown Timer Function With Ticker

Aug 23, 2008

I'm playing a game that requires me to keep track of money that is increased by a variable amount (pre-calculated and in a cell) and in a fixed time interval of 51 minutes weather I play it or not so I want to be able to keep track of the progress of the money gain outside of the game.

So, I need to know the macro coding for a real time counter that will increase the total money amount in one cell based on the variable income (declared in another cell) in the 51 minute intervals.

now... I also need excel to keep track of the value increase even if excel is closed (by the difference in time from when excel was closed last).

View 9 Replies View Related

Excel 2010 :: Progress Bar With Countdown Timer And Elapsed Time

Aug 16, 2012

I have a macro that runs through about 40,000 records which can be quite time consuming. I currently have a status bar that shows the percent of work complete, but I'd like to add something that shows an estimate of how much time is remaining and how much time has passed. Below is the first loop in my code that uses the progress bar. You'll see that I modified the progress bar to include "Label 2" which shows the current record of the total record count, I'd like to add "Label 3" to show something like "2:30 elapsed, 1:15 remaining".

I'm using Excel 2010 on Windows 7 (64 bit).

HTML Code:
Sub IdentifyGS()

POData.Activate
For CurrentRow = 2 To LastRow

[Code] .......

View 9 Replies View Related

Countdown Timer - Insert A Timer Into A Column Cell Range?

Nov 12, 2013

I am trying to insert a timer into a column cell range that will countdown in hours, mins, and sec, when I enter the time. example: when I enter the "time in hr,mins,sec" it will start to countdown to Zero automatically, when I hit the enter key.

View 3 Replies View Related

Creating A Countdown Timer?

Mar 29, 2014

I'd like to create a countdown timer to the nearest second for a project deadline. At present I have a simple formula stating the number of days, but would like it a lot more detailed.

View 1 Replies View Related

Countdown Timer On Userform?

Apr 2, 2013

how to modify, other than one piece) for a simple countdown timer to place on a userform. On my form if a user clicks a check box I display a label that shows a count down from 300 to 0 (best/simplest code I could find to modify for my purposes). But I'd rather it look like a timer counting down from "00:05:00" to "00:00:00".

Code:
Private Sub PPackCall14_Click()
'lbCountDown, lbMinutes
If PPackCall14 = True Then
Dim i As Integer
Select Case lbMinutes.Value
Case ""

[code]....

View 4 Replies View Related

Conditional Formatting As A Countdown Timer?

Oct 21, 2009

The idea is that when they enter the date they recieved their PDR it auto posts the date it needs re doing in column C. To emphasise it and make it easier i am trying to use the formula is part of conditional formatting so that the spreadsheet goes green when date entered, orange when there is 30 days till renewal and red when its over due. I've been trying formulas such as =c2-today()<30 in the conditional formatting box but i cant seem to get it to work.

View 3 Replies View Related

Countdown Timer For Wrestling Matches?

Feb 18, 2014

A countdown timer (MM:SS) all in A1. Need keyboard control to PAUSE and STOP. The mouse will be otherwise occupied and its use cannot effect the timer in any way. Easy way to set the timer.

*Most periods are 2:00 but overtime periods are either 1:00 or :30, depending. Also, consolation matches usually follow a 1,2,2 format, so I will need a system to be able to reset the timer to any of these easily.

View 4 Replies View Related

Countdown Timer In Single Cell In Excel?

Oct 14, 2002

Is there a timer function in which i can have a countdown in seconds in a single cell in MS excel?

View 2 Replies View Related

Add This Number To The Start Time, Factor In Break Minutes And Get To The Projected Completion Time

Mar 3, 2009

I am trying to provide a tool for department leaders to monitor productivity for order processing in their departments. The variables I have are: Number of orders(variable), number of pickers (variable), start time(variable). Then, I know each order takes 1 picker 4 minutes to pick on average, and there are 45 minutes worth of breaks during the picking process. So after entering the variables I used =(((C3*4)/60)/D3) to come up with the time needed to process the orders. What I can't get to is how to add this number to the start time, factor in break minutes and get to the projected completion time. I have Excel 2003 at work. Clearly I need to take a class!

View 4 Replies View Related

Progress Bar To Show Both Percentage Completion And Time Left?

May 28, 2014

How to show progress bar for both percentage completion and time left.

The code below is already created with percentage completion. Just to add time left.

[Code] ........

View 6 Replies View Related

Calculating Task Completion Time In Working Hours

Oct 15, 2007

The below is for Excel 2003.

I want to set up a spreadsheet that can show my work is completed within a service level agreement, based on working hours of 9-5 Monday-Saturday.

I want to be able, for example, to log that a piece of work is reported at 09:00 on a Monday and completed at 10:00 on Monday and for excel to calculate that as 1 hour until completion. Fine so far. But what if that job was closed at 10:00 two days later? Based on an 8 hour working day, that should be 17 hours.

And what if a bit of work comes in at 17:00 on the Saturday. No one works the Sunday. Say the job is completed at 10:00 on the Monday. that should calculate as 1 hour to completion.

The SLA I'm setting is 4 hours.

View 9 Replies View Related

Time Countdown - A Live Clock In The Spreadsheet?

Nov 5, 2011

I need to calculate how much time I've got left before the earliest order needs to be despatched (it might be 2 or more on every day). This wouldn't be a problem if orders would be placed daily. But for every item it varies. For example: for "X" product there is an order in 3 days time to be despatched at 19:00. I have built a live clock in the spreadsheet but I can't work out the formula.

P.S. Also I need two time formats, first - days(text) hh:mm second - just a numeric value that can be formated as [hh:mm].

View 5 Replies View Related

Button Used For Capturing Time (Timer)

Feb 8, 2009

When reading a water meter in a large apartment building a meter reader can also click a timer (LAP) button as the meter passes preset intervals. The worksheet would record the "lap times" in separate cells which could then be compared and usage figures can be calculated, allowing the meter reader to know if there is currently a Leak or other problem before leaving the premesis.

In the attached worksheet you can see what I would like the meter reader enters the reading - the light green "Interval List" is created from that reading. The Meter reader then watches the meter clicking the LAP button each time the interval is passed, the current time is then stored to the Pink cells (Similar to the NOW() function), the times are then calculated in other cells like I did in the Blue column in this case showing elapsed time.

I have tried several ways to do this using NOW, but each time all the cells are updated to NOW not just the current cell - and the Single Button woulod be really nice so the meter reader didn't have to look away from the meter.

View 2 Replies View Related

Excel 2010 :: Update Time In A1 Timer VBA Code

Jun 2, 2014

The only change I made was to change the "Sheet1" to "Journal" to match the worksheet name in my workbook.

As you close and reopen the workbook, the timer should start with =NOW() in A1 (formatted as "HH:MM:SS") and count up with the current time until you close the workbook.

I use Excel 2010, could that be the problem, that I copied a VBA code for an older version of Excel???

Question: What exactly is a regular module, do I use Module 1 for the first portion of the code or place it in ThisWorkbook?

AUTO TIME UPDATE VBA

PLACE IN REGULAR MODULE

[Code] ....

View 7 Replies View Related

Excel 2007 :: Start Timer After Workbook Open For Certain Amount Of Time

Dec 28, 2013

I have the following code below for a timer in a userform. Right now it is configured to start when a button is clicked. I would like to have it automatically start the timer after the workbook is open for more than 5 minutes but so far have been unable to get it to do so. I have tried putting the code in the workbook module but it still won't run. It also has a button to reset the timer if they need more time in the workbook and also a button for them to save and close the workbook if they are finished. I'm running Excel 2007.

VB:
Private Sub CBReset_Click()
Dim T, E, M As Double, S As Double
T = Timer
Do
E = CDbl(Time) * 24 * 60 * 60 - T 'elapsed time in secs
M = AllowedTime - 1 - Int(E / 60)
S = 59 - Round((E / 60 - Int(E / 60)) * 60, 0)

[Code] .....

View 5 Replies View Related

Start/Stop Timer For Hours Worked To Include Break Time

Oct 15, 2007

I have a timesheet where user updates start and end time for various tasks.

I have placed a time capture button in the excel sheet (which is simply a macro saying =now() function)

The user clicks it before starting and after finishing the task. The start and end times are captured in adjacent cells.

If the user starts the work, and goes on a lunch break say for 20 min, comes back finishes the task and captures end time, the time difference will not consider break time which is non productive.

How can I incorporate something like 'pause' option so that before he goes for lunch he can temporarily pause the time.

View 9 Replies View Related

Macro Stops Before Completion?

Apr 13, 2014

i ran some tests and it was working good only doing folders with ~100 files. i tried running the macro on all the files (~70,000), but I ran into problems with the computer going into standby while I was away. I tried running a batch of 3000 files and it completed, but only got up to around ~400 out of ~3000 records. Maybe, it stops cause of code related inefficiencies?

Here's the code:
macro_forexcelforum.txt

View 1 Replies View Related

Macro Quitting Before Completion

Nov 24, 2008

The macro is designed to grab a closing stock price for a date specified for a list of Symbols in column A and the date in column B. The closing price is then displayed in column D.

The problems (there are two that I found) I am running into is that when the Macro encounters a symbol in Column A and is not recognized, an error message pops up and the macro stops altogether. I want the macro to continue to run down the list but I can't figure out where in the macro it is stopping and, more importantly, how to make it continue. I have attached a copy of file if needed (if opened, you can see it stops working after row 11).

View 5 Replies View Related

Macro To Delete Itself Upon Completion

Feb 20, 2009

I have 2 command buttons on a sheet, one of which I would like to upgrade to delete the other, as well as itself, upon completing the rest of its functions. That's right, normal VBA isn't fun enough anymore, I want kamikaze suicidal code that wipes itself off the face of the earth.

My colleagues are... less than comfortable with VBA. I use it to produce some of the forms which I send to them, and if I could delete the code automatically after running, I'd save myself some time and/or save them some confusion.

View 2 Replies View Related

Subscript Out Of Range After Completion

Dec 31, 2009

I'm getting a "Subscript out of Range" error on a routine that was running fine a few days ago. It's part of a larger macro, so I've pasted the full code for that macro below. The problem is in the routine labled "Replace Regional Labels". What that's supposed to do (and DOES do) is to replace labels such as 110 or 11000-CSD with 11000. The error message comes up AFTER the routine has completed it's work. The offending line is:

View 2 Replies View Related

Calculate Workdays - Completion Date

Dec 26, 2012

I have the following function:

=IF(G13="",IF(H13>1,1,IF(G13>1,workdays(H13,G13,Holidays))))

The intent is to calculate the completion date against the assigned date as follows:

G13 - Typically the assign date but sometimes can be blank because someone forgets or doesn't bother to insert

For this example, let's say: 12/17/12

H13 - Completion date

For this example, let's say: 12/20/12

I'm expecting a result of '3' for 3 days

The first half of the function is intended to calculate 1 day if G13 is blank or not defined. However, when I have dates in both cells, I'm getting a "false" answer instead of a numerical value that I'm expecting.

In our workplace, we do work weekends & sometimes 7 days a week.

View 11 Replies View Related

Macro That Closes Excel Upon Completion?

Jan 14, 2008

This is my first time posting to the site so I will start with a simple question. I have an email macro that will send the workbook to a specific recipient. What I want it to be able to do is close excel after the macro is ran and the email is sent. If anyone would be kind enought to supply me with a code that will work .....

View 9 Replies View Related

How To Forecast Project Completion Date

Sep 28, 2008

I have project start date in cell C2((MMDDYYYY format).In cell D2 I have put the total days needed to complete the project.In cell E2:E6 I have got the scheduled Holidays.

I need to calculate the project completion date in F2.We work from Monday to Saturday,Sunday being off day.

The detail is as follows:-

View 9 Replies View Related

Show Message If Completion Date Not Met

Aug 28, 2007

I have a spreadsheet where I have input all of my technicians service calls and installations.

In Column C Row 5 and up to the max I assume because I'm not sure how many rows I would use in a year, I have an estimated completion date.

In Column D and the same Rows as above I will input the Actual Completion date.

What I want is if the current date is past the estimated completion date (Column C) and there is no date entered in the Actual Completion date (Column D) I would like a MsgBox to pop up saying "Please enter a new completion date on row _"

"_" would be which ever row the estimated completion date has expired without an actual completion date being entered.

View 9 Replies View Related

Date Countdown

Apr 11, 2009

really i didnt understand this following post. http://www.excelforum.com/excel-misc...-in-excel.html. as i told u before i am not a Professional in excel. i will undestand when u guys r providing attach files othewise good examples.

View 2 Replies View Related

Countdown Clock

Dec 31, 2007

How to add a countdown timer with start, stop, reset functions to an existing Excel spreadsheet?

View 14 Replies View Related

Status Bar Countdown

Jan 9, 2009

in the status bar in the bottom left once the workbook is opened is want it to say
## Seconds Remaining Before Workbook Auto Closes

as for the ## I want it to countdown from 60 seconds

View 9 Replies View Related

Changing Cell Colour On Basis Of Completion?

Apr 7, 2013

I have two sheets, one sheet showing the total calories burned, in the sheet two, i have the target set,

How can i change the color of cell in the target on the basis of the achivement for example the target is say 10,000 cells and after I achieve 1500, it will change the color, after 3000 it will change another color and so on and so forth.

View 1 Replies View Related

Vacation Accrual Based On Completion Of 90 Day Probation?

Nov 29, 2013

I need to create a tracking sheet for my vacation. The vacation starts to accrue here after a 90 day probation following the hire date. Each individual is allowed 40 hrs/year. I also need to see the hours accrued, the hours used & the balance. Everyone's balance renews on their anniversary. I will fill in the blanks for the names in one column & the hire date in the next column and I would like formulas for the following columns.

View 12 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved