Excel 2010 :: Progress Bar With Countdown Timer And Elapsed Time

Aug 16, 2012

I have a macro that runs through about 40,000 records which can be quite time consuming. I currently have a status bar that shows the percent of work complete, but I'd like to add something that shows an estimate of how much time is remaining and how much time has passed. Below is the first loop in my code that uses the progress bar. You'll see that I modified the progress bar to include "Label 2" which shows the current record of the total record count, I'd like to add "Label 3" to show something like "2:30 elapsed, 1:15 remaining".

I'm using Excel 2010 on Windows 7 (64 bit).

HTML Code:
Sub IdentifyGS()

POData.Activate
For CurrentRow = 2 To LastRow

[Code] .......

View 9 Replies


ADVERTISEMENT

Time To Completion Countdown Timer

May 8, 2014

I need to list multiple items that end in, example:at time entered there is 45:14:50 = Hr:Mn:Sec to completion, and would like the date and time of completion or just a countdown to 0 would work. I will have 60 to 70 items running at the same time with different start times and lengths. Picture queueing up items at different times to complete in different length of time and I need to be ready when each item is done. I know this is an Excel forum but I also use Apple Numbers so if either one works better I'm fine with that.

In the attached file, column R is the start time that I enter that needs to be calculated to column S. When I enter an item that takes 54hrs 23min 45seconds to complete, what date and time will it be ready.

View 9 Replies View Related

Real Time Countdown Timer Function With Ticker

Aug 23, 2008

I'm playing a game that requires me to keep track of money that is increased by a variable amount (pre-calculated and in a cell) and in a fixed time interval of 51 minutes weather I play it or not so I want to be able to keep track of the progress of the money gain outside of the game.

So, I need to know the macro coding for a real time counter that will increase the total money amount in one cell based on the variable income (declared in another cell) in the 51 minute intervals.

now... I also need excel to keep track of the value increase even if excel is closed (by the difference in time from when excel was closed last).

View 9 Replies View Related

Countdown Timer In Single Cell In Excel?

Oct 14, 2002

Is there a timer function in which i can have a countdown in seconds in a single cell in MS excel?

View 2 Replies View Related

Countdown Timer - Insert A Timer Into A Column Cell Range?

Nov 12, 2013

I am trying to insert a timer into a column cell range that will countdown in hours, mins, and sec, when I enter the time. example: when I enter the "time in hr,mins,sec" it will start to countdown to Zero automatically, when I hit the enter key.

View 3 Replies View Related

Excel 2010 :: Calculating Average Elapsed Time

Apr 3, 2014

In our sql server table, we have a field of type DATETIME. This field is populated by a vendor product with the elapsed time of an event.

We created a SQL Server view of this column and other columns of info joined together from several tables.

Then we create in Excel 2010 a new spreadsheet with a data connection to the SQL Server, instance, and view that we created.

Excel 2010 displays each of the columns in our view.

The elapsed time column appears as "dd hh:mm:ss". However, when we click on a cell to look at its formatting, Excel lists it as general.

We want to calculate the average time in this column.

We go down below the data, click on a cell, and insert =Average(C2:C17215) and we get an error saying dividing by zero.

We have 17,000+ rows of data, so there is no divide by zero math going on here. Each row in this column has data, so there are no blank cells.

We have spent some time web searching. We then tried various methods of calculating this. Nothing has worked. In most cases, we get the divide by zero. We tried some solutions that mention using an array forumula, but that just changed the error to an invalid value error.

View 1 Replies View Related

Excel 2010 :: Update Time In A1 Timer VBA Code

Jun 2, 2014

The only change I made was to change the "Sheet1" to "Journal" to match the worksheet name in my workbook.

As you close and reopen the workbook, the timer should start with =NOW() in A1 (formatted as "HH:MM:SS") and count up with the current time until you close the workbook.

I use Excel 2010, could that be the problem, that I copied a VBA code for an older version of Excel???

Question: What exactly is a regular module, do I use Module 1 for the first portion of the code or place it in ThisWorkbook?

AUTO TIME UPDATE VBA

PLACE IN REGULAR MODULE

[Code] ....

View 7 Replies View Related

Creating A Countdown Timer?

Mar 29, 2014

I'd like to create a countdown timer to the nearest second for a project deadline. At present I have a simple formula stating the number of days, but would like it a lot more detailed.

View 1 Replies View Related

Countdown Timer On Userform?

Apr 2, 2013

how to modify, other than one piece) for a simple countdown timer to place on a userform. On my form if a user clicks a check box I display a label that shows a count down from 300 to 0 (best/simplest code I could find to modify for my purposes). But I'd rather it look like a timer counting down from "00:05:00" to "00:00:00".

Code:
Private Sub PPackCall14_Click()
'lbCountDown, lbMinutes
If PPackCall14 = True Then
Dim i As Integer
Select Case lbMinutes.Value
Case ""

[code]....

View 4 Replies View Related

Conditional Formatting As A Countdown Timer?

Oct 21, 2009

The idea is that when they enter the date they recieved their PDR it auto posts the date it needs re doing in column C. To emphasise it and make it easier i am trying to use the formula is part of conditional formatting so that the spreadsheet goes green when date entered, orange when there is 30 days till renewal and red when its over due. I've been trying formulas such as =c2-today()<30 in the conditional formatting box but i cant seem to get it to work.

View 3 Replies View Related

Countdown Timer For Wrestling Matches?

Feb 18, 2014

A countdown timer (MM:SS) all in A1. Need keyboard control to PAUSE and STOP. The mouse will be otherwise occupied and its use cannot effect the timer in any way. Easy way to set the timer.

*Most periods are 2:00 but overtime periods are either 1:00 or :30, depending. Also, consolation matches usually follow a 1,2,2 format, so I will need a system to be able to reset the timer to any of these easily.

View 4 Replies View Related

Label As Progress Based On Timer?

Jul 26, 2014

I have this code to display the progress of timer, but this code not actually timer that i can set the time value.

The time value based on "..Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)". How to create the Label Progress based on Timer.

This code under module1:

[Code].....

And this code under UserForm1:

[Code] .....

Attached File : Label Progress Based On Timer.xlsm‎

View 7 Replies View Related

Excel - Elapsed Time In Cell

Feb 20, 2012

I would like to develop code that does the following:

- I first manually move to a cell
- Press a key combination (CTRL+T for example)
- Press the same key combination, the elapsed time from the first press to the last press is entered into that cell in seconds.

It would be nice if the cell showed the time incrementing live, but that is not required.

View 4 Replies View Related

Get Excel To Calculate Elapsed Time Between Two Dates?

Apr 3, 2014

I have been trying to get excel to calculate elapsed time between two dates using mostly what I've read from other elapsed time posts. But I am clearly missing a step. I'm trying to streamline my process for taxes.

I want to take a time in the format of " yy/mm/dd hhmm " example: 1

3/04/24 2245 ( note its a 24hr clock) 13/04/24 2245 would represent 2013 April the 24th at 10:45PM.

------- A --------------- B -------------------- C
13/04/24 2245 ------13/05/24 0900 ---------[display hrs elapsed] <-- currently get #name?

I have custom formatted A and B to yy/mm/dd hhmm and formatted c to [h]:mm

When you enter b-a in column c you get #name?

If its easier to have the date and time into separate columns I can give that a shot, I was just trying to make it as streamlined as possible for copy past.

View 11 Replies View Related

Excel 2010 :: How To Create Userform With Progress Bar

Feb 7, 2013

I'm trying to create a userform with a progress bar. The progress bar does NOT need to be 'real' and accurate, but simply act as a timer to illustrate to the user that the program is running some quick calcs.. Again, basic progress bar, with about about a 4 second completion time..

(using excel 2010 VB)

View 6 Replies View Related

Excel 2007 :: Start Timer After Workbook Open For Certain Amount Of Time

Dec 28, 2013

I have the following code below for a timer in a userform. Right now it is configured to start when a button is clicked. I would like to have it automatically start the timer after the workbook is open for more than 5 minutes but so far have been unable to get it to do so. I have tried putting the code in the workbook module but it still won't run. It also has a button to reset the timer if they need more time in the workbook and also a button for them to save and close the workbook if they are finished. I'm running Excel 2007.

VB:
Private Sub CBReset_Click()
Dim T, E, M As Double, S As Double
T = Timer
Do
E = CDbl(Time) * 24 * 60 * 60 - T 'elapsed time in secs
M = AllowedTime - 1 - Int(E / 60)
S = 59 - Round((E / 60 - Int(E / 60)) * 60, 0)

[Code] .....

View 5 Replies View Related

Time Stamp Macro Tell Total Elapsed Time From When I Started To When I Finished

May 22, 2009

I am not sure that I can do this, but here is what I would like to do. I have a worksheet that I initial when I start a job in on cell and then when I finish in another cell. What I's like is to have a macro running in the back ground that will tell me the total elapsed time from when I started to when I finished.

View 5 Replies View Related

Create A Time Stamp That Shows Elapsed Time

Jan 25, 2010

I am trying to create a time stamp that shows elapsed time. So I enter my start time, and if I enter any text in cell B7, return the elapsed time in A7 based off of start time in A6. I have attached an example workbook.

View 2 Replies View Related

Changing Elapsed Time Into Time As Portion Of An Hour

Sep 11, 2013

In A1 I have 35 min elapsed time and need to change it to time as a portion of an hour. It reads the 35 min as TIME, therefore I am currently using

=IF(A1>=0.5,A1-0.5,A1)*24. Output is .58, which is perfect.

(output column formatted as a number)

Likewise 3:28 becomes 3.47.

View 1 Replies View Related

Time Countdown - A Live Clock In The Spreadsheet?

Nov 5, 2011

I need to calculate how much time I've got left before the earliest order needs to be despatched (it might be 2 or more on every day). This wouldn't be a problem if orders would be placed daily. But for every item it varies. For example: for "X" product there is an order in 3 days time to be despatched at 19:00. I have built a live clock in the spreadsheet but I can't work out the formula.

P.S. Also I need two time formats, first - days(text) hh:mm second - just a numeric value that can be formated as [hh:mm].

View 5 Replies View Related

Excel 2010 :: Insert Date And Time In Column Upon Data Change For First Time Only

May 3, 2013

I am looking for a macros VBA where a user insert or update a data the date and time should be insert in column I and save the workbook.

Note: If the column I already have the date and time inserted before then it should give message record already have date and time.

I am using office 2010.

View 9 Replies View Related

Elapsed Time

Jul 3, 2009

I am trying to get the number of hours elapsed between these 2 dates and time

6/28/2009 9:14
4/26/2009 8:05

this is the format it is imported as is there a way of getting the number of hours and minutes between the 2 i have tried a number of formats but once it gets beyond 24 hours i can't get the correct result.

View 9 Replies View Related

Determining Elapsed Time

Aug 22, 2014

I have a document in which I am trying to determine the length of time between a start date & time and a finish date & time. The format of the time/date cells is

mm/dd/yy hh:mm:ss

Basically, I am just subtracting the first cell from the second. This works fine as long as both dates are in the same day, such as

START FINISH ELAPSED
08/20/14 23:42:22 08/20/14 23:43:59 0:01:37

However, if I have a situation such as

START FINISH
08/18/14 23:00:15 08/19/14 0:03:22

the ELAPSED cell fills with ######## with a tooltip stating that "dates and times that are negative or too large display as ######." The actual result in this example should be 1:03:07.

How do I get consistency amongst my resulting formulas?

View 6 Replies View Related

Formula For Elapsed Time

Feb 22, 2008

I am trying to determine the amount of off duty time from the last stop time to the next start time. The object is to reset another column of hours (not shown here) to 60 hours only if there has been 34 hours of off duty time prior to the next start time.. I have posted this problem previously but did not explain very well I need to accomplish. The start and end times ( E & F) are formatted as hh:mm AM/PM and the Work time and the other columns are formatted as [hh]:mm. Where my formula fall short is when there are blank days indicating weekends or days off ...

View 9 Replies View Related

Elapsed Time Display

Feb 26, 2007

I am trying to find some simple code that will display elapsed time starting from execution of a macro to a certain point where a message box is displayed at which time the elapsed time should pause awaiting user interaction. Once the user has responded to the message box prompt the timer should continue on from its paused state ceasing at the end of the macro. I would also like the displayed box showing the timer to remain visible displaying minutes and seconds and continuously incrementing even though screen updating is turned off within the macro. (The macro switches sheets a number of times) and the elapsed time box needs to positioned at bottom left of screen.

View 5 Replies View Related

Need Start Time - Have End Time And Elapsed

May 8, 2014

How to find the elapsed time between two times, but I need the start time in this instance.

Attached is my spreadsheet for a callcenter in which has exported data showing what time the data is exported and how long someone has been their state if they are out of adherence. I have selected fields explaining what I am wanting where on the spreadsheet.

I am wanting to subtract the elapsed time in MM:SS from the End Time which is in HH:MM AM/PM (Imported as text). I do not mind moving these to separate cells to the left to format them correctly, I want to be able to right click in A1, paste, and the rest trickle.

I am having difficulties subtracting the time to get the start time.

Time Conversion (IEX Import).xlsx‎

View 5 Replies View Related

Sum Of Elapsed Time Involving Comma

Aug 12, 2014

I have been currently working with Data in which involves time over 24 hours and I am trying to find the sum of these numbers.

An example would be the following :

4,889:38:33 +4,711:28:37 + 4,851:11:26 .

Of course, I have removed the comma and changed format, this did correct the issue. However, any way to find the sum with the comma still involved.

View 4 Replies View Related

Calculating Time Elapsed Over Two Days

Dec 3, 2013

I am trying to calculate the time elapsed. I have included a caption to show my formula. The problem I have is that some times are showing > 60 minutes instead of increasing the hour. When my day go over the midnight hour I get a negative number.

View 11 Replies View Related

Activate Message Box After Time Elapsed

Feb 26, 2012

I have a worksheet with checkboxes in each cell in A11:A110 as well as O11:O110. When a checked, the current time appears in the corresponding cell, using this code for example, A11 :

Private Sub CheckBox1_Click()
*
*** Range("A11").Select
*** ActiveCell.FormulaR1C1 = "=NOW()"
*** Range("A11").Select
*** Selection.Copy
*** Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
******* False, Transpose:=False
*** Range("A11").Select
*** Application.CutCopyMode = False
End Sub

This system is used to track time elapsed. Example, the first event of the day begins, so I click the checkbox in A11 and the time appears in A11. When the event ends, I click the checkbox in O11 and the time appears in O11.

Now what I would like to modify is the following:

After clicking A11, if 30 minutes have elapsed and I still have not checked the end time in O11, I would like the whole row to highlight in red, a pop up message box should advise me that 30 minutes have elapsed. I could click OK and remove the message box. The whole row remains in red highlight until I finally check the checkbox in O11.

Obviously I'd copy the code for each row.

I assume the code goes with the checkbox's code for A11? Also, is it possible for a cell to flash? (highlighted white, then red, then white, red, etc...)

View 1 Replies View Related

Delete Range After Elapsed Time?

May 31, 2012

Setting up a worksheet to monitor bookings within a time range of 06:30 to 09:30 then from 14:00 to 18:00. The data is collected in the following ranges. E3:E25 M3:M25 E29:E60.

I need the data collected from 06:30 to 09:30 - deleted JUST before 14:00 Then need the data deleted again JUST before 06:30 the next day.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved