Is there a way to create cells to be like a check box. I am creating a survey in which there are 5 options and what I would like to do is make the cells so that that when they click into the cell it puts an X in it or maybe highlights that cell.
View 9 RepliesI am trying to create a macro that will create a number of check boxes, which are linked different cells. I have had some success in creating multiple check boxes and having them at the destination I want the problem is that instead of linking to different cells they are all linked to the same cell. I have attached a sample workbook SAMPLE.xlsx
View 1 Replies View RelatedI have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
I need to check if a folder exists and if not then create it. not sure how to go about this
View 2 Replies View RelatedI would like to create a form to select some columns from a list of columns.
This could make it simpler for an end-user to chose which columns they want to see in my application.
(see my previous question: [url]
Ideally, I would prefer to do that just like rows can be selected in an Excel list.
However, I doubt this could be done.
So, to be practical, I would put a button on my sheet.
When the user clicks the button, a form would appear and show the current list of columns.
The user would mark or unmark to define his view and click ok to get the sheet with only the columns he wants.
The number of column in the table can change.
When the form loads it must determine what are the columns to include in the list (headers).
What I really don't know is which controls I should use on the form?
Are there some list control with tick marks available, for example?
Or, I might dream of a mark-enables combo box or list box, as can be seen often on the web.
I have a macro that creates a spreadsheet on a weekly basis and have been using it for quite sometime. Due to the large number of spreadsheets I would like to incorporate some code that would create a folder every month. I would assume that the code would need to include a check routine to see if a folder for that month exsists.
View 3 Replies View RelatedI know how to check for a path exsistance. If Dir(DEST, vbDirectory) = "" Then MsgBox "Path does not exist" (while DEST = "C:TempMike"). I would like to add a question which will determine if the user wants the Macro to create that Path.
1. I do not know how to create that path via VBA Code.
2. What if 'C:Temp' allready exists and only 'Mike' has to be added/created !?
I have some code which, which I have modified it to create check boxes for all rows of data, but when I run it, it begins to wipe out the data, and create an endless column of numbers and check boxes. Here is the code:
Sub SelectCell()
Application. ScreenUpdating = False
Dim Z As Range
Set Z = Cells(1, 1).EntireColumn. Find("*", SearchDirection:=xlPrevious)
For i = 2 To Z
Range("A" & i) = i
Set cll = Range("A" & i).Offset(0, 1)
For Each shp In ActiveSheet.Shapes
If Left(shp.Name, 8) = "CheckBox" And shp.TopLeftCell.Address = cll.Address Then
shp.Delete
Exit For.......................
I have tried to set it to recognize how many rows are filled with number, give that to variable Z and then apply the code but it simply does not work.
What I'm basically trying to do is make a code that looks at where the "x" values are in my range and if the month matches the current month, open a pop up that says "Service Required: Equipment Name" when the file is opened.
If it's any easier, an actual date could be written instead of an x.
An alert system for service required if you will. I have attached a file.
TestSchedule.xlsx
So I've got Sheet 1 with say
____A___B___C
1___m___i___c
2___r___o___s
3___o___f___t
I would like to create a button that can create a new sheet and paste A1 to C3 at the same location on the new sheet
and I need this to create a new sheet and do that everytime the button is pressed.....
******** ******************** ************************************************************************>Microsoft Excel - test.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutH2I2J2K2L2H3I3J3K3L3=
HIJKLMNOPQRSTUVWXYZ1Cat*ID*#ELECTMTC*HoursInv.*Material*$Mutiplier096450965509656097510975209757098891023610673106751067610842108772108429655#N/A1.5813310317206365573396459655#N/A1402310317206365573Buchanan Survey*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
This is a partial of the sheet that I am working on.
The current Formula in Column L is manually entered for each line. What I would like to know is if there is a way to have a macro that would create this formula?
What we would need it to do is check out the Cat ID #'s in cells H - J and based upon the numbers in there, look up the $ amount (right now they are in columns N-Z). The amount in column M would be manually input and then the formula in column L would be
the value in M multiplied by the sum of the values that correspond with the ID #'s in H-J plus 10.
I have a range of cells which contains one of two text values (Ok and Not Ok). I would like to check my range of cells for these values. If this range have one cell that contains the text "Not Ok" I would like the formula to say "Not OK". If all cells contain "Ok" I would like the formula to say "Ok".
View 8 Replies View RelatedI have multiple colums that I want to compare (A=F), (B=G)........
I want to see the difference of the two as shown in Blue column (example file is attached.)
Skærmbillede 2012-12-13 kl. 18.37.15.jpg
I have a number of worksheets, each sheet is set up like a data entry form, at the bottom of which is a command button that takes them to the next worksheet based on a value in a cell. what i want to do is before it takes them to the next worksheet it checks a selection of cells, if any of which are blank it shows an error message and wont allow them to continue, better still the cell that is blank it high lights with a red border.
View 2 Replies View RelatedI am using the followng code to check data is entered in a cell ...
View 6 Replies View RelatedI would like to check a combination of two cells, if these two cells are both empty (not zero, just blank) then it will return a blank in another cell. I tried using AND but am unsure how it works. I would like to use a "Case" Function.
Function FirstCheck(Count1, Count2)
Select Case FirstCheck
Case Count1 = "", Count2 = ""
FirstCheck = ""
Case Else
FirstCheck = Abs((Count1 - Count2) / (Count1 + Count2))
End Select
End Function
I am trying to get a statement to check 7 different cells to see if they contact the same value, i go into a little depth
if a person is late to work then, a text value of 'LT' for late is placed in the cell, if they are late the next day then another LT will be used and so on.
from this then how many mins they are late is loaded into the next cell so
i have so far (in english) =IF Cell Mon,Cell Tue,Cell Weds, Cell Thurs, Cell Fri, Cell Sat, Cell Sun = 'LT' then SUM all mins late
but excel is saying there are to many arguements, any one any ideas can provide sample spreadsheet if needed
I have the following code that i want to use to run trough a few checkboxes to check the value and then wright something in a cell. i have written the the checkbox name to a variable and then want to use it in the if command but gives me a type mismach.
Code:
Dim CheckBox As String
For i = 1 To 204
For c = 3 To 227
CheckBox = "Sheet3.CheckBox" & i & ".Value"
If CheckBox = True Then
Range("J" & c) = "Done"
Else
Range("J" & c) = ""
End If
Next
Next
I want to do a check with one cell that has a list of a maximum of 4 numbers seperated by a comma and space, with 4 cells that have one of these numbers in each of them. The numbers wont be in the same order, and they wont be repeated.
Example
A3 = 4, 12, 19, 34
A4 = 12
A5 = 19
A6 = 4
A7 = 34
I only need to highlight if they dont match. So result could either be a tick or cell changes colour.
how to check if cells contain only whole numbers (cells are in text format)?
I do not know how the code is for the activecell checking
Example Range("A1:A10")
ColumnA
12345
12345
555,10
12345
1.20
A6666
12345
12345
12345
As soon the code hits a cell containing something other then numbers then Msgbox "Error"
Sub Check()
i = 1
Do Until Cells(i, 1).Text = ""
Cells(i, 1).Select
If Not Activecell.Text only numbers then
MsgBox "Error"
End If
i = i + 1
Loop
End Sub
I'm trying to scan a column of data, example column H, for empty cells, if it's empty then skip it. This doesn't work, because cell.Value = " ":
If cell.Value 0 Then
'Extra coding
Else
End If
Sub PastSpec()
If Selection.Locked = True Then Exit Sub
On Error GoTo ErrHan
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
ErrHan:
Exit Sub
End Sub
I recorded part of it and adapted it afterwards. You will notice I have a line to check for locked cells, this does its job if the cell selected is locked. However if the cell selected is unlocked and the cell below is locked the code still excutes and pastes.
In a column "V", when the user enter "Y", i need to copy the entire row to another sheet("Written-off"), its working fine.Sometimes the first 2 columns of that entire row where the user enter "Y" may be null, so using my code, copy first entire row where user put "Y" and paste to another sheet("Written-off"), then user also enter "Y" to wherever in "V" column, this time the entire row should overwrite the last row in the "Written-off" sheet.
I found the reason is first column of the last row was null, so when check the first cell, if it is empty then the next entire row should be copied that area.
Is there anyway to check first 2 cells of the last row in a sheet in null or not?
If Right(Left(ActiveCell.Address, 2), 1) = "V" Then
myColumn = "V"
If Intersect(Target, Columns(myColumn)) Is Nothing Then Exit Sub
On Error GoTo last
If UCase(Target.Value) = "Y" Then
Target.EntireRow.Copy Sheets("Written-Off").Range("A" & Rows.Count).End(xlUp)(2)
Application.CutCopyMode = False
Sheets(Sh.Name).Select
Else
Exit Sub
End If
I have two cells which refer to employee number: A1 and A2
(employee numbers are 001, 002, 003, etc)
I want Cell A3 to check if either A1 or A2 = 001
If both cells is 001, I want an "error message" because that is not allowed, and if one of them = 001 then I want the value from Cell A4 to be but in Cell A3.
So in my head the forumla should go like:
=If(A1 Or A2 = 001;A4;"-";)
I am successfully using VBA to check a cell on one sheet against a cell on another sheet.
How easy would it be to check if this is the same OR less than 2 or more than 3? I have done part of this using nested formulas but cant find anything to help me with the syntax in VBA
The code I am using is
If W1.Cells(a, 3).Value = W2.Cells(b, 3).Value Then
I have completed a formulation and included in a macro but I dont know about coding to check for specific cell string values before macro will take off. I want macro to check that if specific cell text are not matched, use MsgBox to display the wrong versus correct cell string text, then vbOK to exit macro. Also, if Range(B2:G2,J2) are completely blank, use MsgBox to display "missing data", then vbOK to exit macro.
cell B =REQ
cell C =SS
cell D =Current Stock
cell E =PO
cell F =Sales Order
cell G =In-coming
cell L =unit cost
If these cell texts (U or L case will do) are in their specific cells, macro will proceed. If either one or some of these cell texts are not matched, display MsgBox of the wrong and correct cell texts. Then button OK to stop macro run. If Range(B2:G2,J2) are completely blank, use MsgBox to display "missing data", then vbOK to exit macro.
I want to divide the numbers from 2 cells, down a long column. Let's further say that in some instances there aren't any numbers in either of the cells. You get a divide by zero error.
So you have values in a1 and b1 through a10 and b10. You want to divide the value in the a column by the value in the b column and return the answer in the adjacent c column. You've copied the formula all the way down to c20.
All the cells from c11 to c20 will have divide by zero errors.
What is the syntax to check if both cells in columns a and b are greater than zero so that either an answer will be returned or just a blank cell will result, (when nothing is in one of the cells from a or b?
The following formula works for checking the status of cell A, how do I also check the value in cell B?
=(IF(A5>0,A5/B5,""))
something like?:
=(IF(A5>0 and B5>0,A5/B5,""))
This does not seem to be working and I do not know why.
If Range("T3:T999").Value = "Duplicate" Then
MsgBox "It did work"
Else
MsgBox "What happened??"
End If
What I am attempting to do is search if 2 cells contain specific text. For example in Column C I want to output "Yes" only if cell A and B are Yes otherwise the output is "No".
ABC
1YesYesYes
2YesNoNo
3NoNoNo
I have tried =IF(A1=B1="Yes", "Yes, "No") to no avail
Upon deactivation of a worksheet I am trying to check a range of cells("B8:M8") for empties. If any cells are empty I want to generate a MsgBox that asks the user to remedy the situation. It is not necessary to tell them which cell is empty but it would be nice. Can anyone help me format this code?
View 2 Replies View Related