What I am attempting to do is search if 2 cells contain specific text. For example in Column C I want to output "Yes" only if cell A and B are Yes otherwise the output is "No".
ABC
1YesYesYes
2YesNoNo
3NoNoNo
I have tried =IF(A1=B1="Yes", "Yes, "No") to no avail
How to check if a range of cells matches specific text.
Example:
A1 - dog
B1 - cat
C1 - mouse
I want the formula to give me "yes" if dog is present.
=IF(A1="dog", "yes", "no") is for one cell. However if I do it this way:
=IF(A1:C1="dog", "yes", "no") I get an error.
am trying to write code to check if a cell contains specific text.
Basically, I hide all of the rows on the spreadsheet, and unhide them only if certain conditions are true.
Everything else, including first check is not a problem, it is just the part where I need to find specific text within a cell that contains various words.
Also, the cell I am searching for the text in is on a different sheet within the same book.
e.g.
------------------------
'Check for Specific parts
If Cells(intCount, 11).Value = "Yes" And ??(Does Cell 'x' (on a different worksheet) Contain the Word "Specific")? Then
'Select row
Rows(intCount).Select
'hide row
Selection.EntireRow.Hidden = False
End If
------------------------
I would like to BeforePrint check Left and Right Header for a specific text. If the text is different then i.e. “XYZ Test” then call sub ClearForm().
View 9 Replies View RelatedVBA to loop through all the cells, or an active selection, and if it finds a cell with a formula that starts with "=VLOOKUP" or "GETPIVOTDATA", then copy and paste values for those cells. If it comes across a cell that starts with "=SUM" then it leaves it as is. I've been looking for way to insert a wildcard to make this work, but can't seem to find anything.
View 2 Replies View RelatedWhat I want is to find out whether a value in a node can be found from a group of other nodes. I've tried lupike this, but it doesn't seem to work properly.
=IF(ISNUMBER(SEARCH(C1;$A$2:$A$200));"WAS FOUND"; "NOT FOUND")
I guess one solution could have been using concatenate function, but why on earth can't I use the function like this: concatenate(A1:A5)? Why do I have to put each term individually?
I receive thousands of raw data every week as shown in the excel sheet {raw data}
I would like to use a macro that could automatically sort the raw data like the format in the excel sheet {template}
For example:
Looking at the raw data and compare with the template, i would have to delete the whole columns that have (BU_CODE , EAN_CODE, SUPPLIER_CODE, SUPPLIER_NAME , BRAND_NAME, and SUB_CATEGORY_CODE) and add in columns and name it as Principal, Cateogry , Brand and range).
I have a worksheet for a mailing list with name, address and other information. I need to search for the text "board" in the name column and if it is found, add a code to a different column.
View 3 Replies View RelatedI'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
View 2 Replies View RelatedI am exporting lots of data from a website and for some reason to do with html i am getting   in a few cells in my description column (column C), i think that means "& " in html. this occurs in some cells but not others when i paste it into Excel. I would like to remove these characters.
I know I can do it with crtl H and the replace field blank but I would like a formula so in the future the user will simply have to paste information and then get converted information out (as they will struggle to use excel).
CELLS AA5:AA64 will have either EF, CS, SBS and/or, RP. Cell AA16 could be "EF / CS / SBS" and AA20 could be CS. I want Cell AA65 to count show how many CS's have been entered in that range. How would I do this.
View 3 Replies View RelatedI would like to write an If clause to do the following. If the cell is colored blue (color index 32), insert the text "ignore" in the cell
View 6 Replies View RelatedWhat i need it for certain colored text to appear in specific total cells.
For example; i have 38 cells in a column within these cells id like it to have black writing which i want to total up and go into a total for that color into a specific cell and say green colored text into a different total cell and red text into another total cell.
If i had for instance 6 numbers all red 6 numbers all black and 6 green id like the numbers to all be added correctly and also into color specific cells?
in excel how do I count cells that begin with specific text. Ex: in a
column with 100 entries, I want to count the number of cells that have the
letters "app" from the word approved as the first three characters in the cell
The easiest way of explaining what I'm after is to say, I have letters of the alphabet, in their own cells, and I want to find them by way of a search. I don't mind how this is done, but it would be good if for example you entered A, C and E, any cells containing those letters changed, maybe became bold, or the cell filled with colour.
View 9 Replies View RelatedI have a workbook used for scheduling purposes and you can add hours to it by typing in D+1 or D-1, etc. I want to prevent this from working and just ignore the cell if the cell contents say "DC". I've tried to adjust my formula but haven't had any luck. I've attached an example worksheet with the formula for an easier understanding.
Formula: [Code] .......
Attached File : Testsheet.xlsx
I have a spreadsheet where i would like to 'count' the number of cells with a particular colour AND SPECIFIC text (not 'any text').
I attach a xls with the initials of the person in column A, their colour as seen in cells in next four columns with the particular text in each cell. Therefore, for 'ABC1', in the given range, I would like to count how many cells have been allocated with the particular colour (brown, do not know colour index) and the particular text (1 or 2 or 4 or 5) in the range A1:CK39. Haven't supplied the actual sheet for confidentiality reasons.
Im sure this has been addressed before but i need a macro that would act like a "Contains" function. I have Column B that has user comments. These are sentences like "I have a billing issue" or "My item is damaged". My goal search these for keywords and then have a value (category) populate in Column C
Heres an example. the Category is Damaged Goods: Keywords associated with it are "broke" "broken" "replacement" "damaged" "not working"
Another category is Billing: keywords include "bill" "credit" "account"
I need a macro that will search all the comments and if "broken" (for example) is found anywhere within the comment, the value "damaged goods" will be populated in the same row, column C
In the attached sheet I need to check on the Destination in column B, and if it matches set criteria, divide the figure in Column E by 2. eg If LAX is the destination, then for any rows directly under LAX until the next destination appears, column E needs to equal column D divided by 2. If the Destination is not LAX, then Column E equals Column D.
the difficulty I am having is that there can be a variety of row numbers for each destination. I am having trouble creating a formula that can basically work backwards from Row-1 in column B until it gets to a text string, and check that text string against the criteria. so it may be row -1 up to about row -9 dependant on the number of flight times available to each destination throughout the week.
Is there a way to auto-populate all of the empty cells with the word "Need to Review" in a cell range (A1:A250)? Once any of the cells in this range is populated, whatever is inputted should house the cell.
View 9 Replies View RelatedI want some VBA code that will:
1) automatically check the active row to see if it contains specific text (i dont' care if there is other stuff in the cell or cells), such as "truck 1 blahblahblah" and checks for specific font color, such as green.
2) if the row does, then I want it to copy ALL the cells in the active row EXCEPT Column A (which contains the date), and then paste them twice, one 21 rows down from the active row, and one 35 rows down from the active row.
3) Once copied and pasted, modify the pasted cells slightly. The first pasted cells need to say Truck 2 blahblahblah in Column C and be in blue font (instead of the original Truck 1 blahblahblah in Green Font), the second needs to say Truck 3 blahblahblah and be in yellow font. Everything else that was pasted will be the same EXCEPT they will be in blue or yellow font.
I'm building an inventory report based upon a daily report downloaded from a website. The downloaded report changes from day-to-day. All of the data I need remains there, but the location of the columns changes, with the exception of "BOL". I need to sort all of this data in a macro. I have most of my macro figured out, but I'm having trouble with one "sort". I need the data to be sorted FIRST by whether or not the 4th column contains "Clear" or "Dyed". I have the next two sorts already coded, based on SPOT vs Contract and then numerically by column A. But I cannot find macro coding or an excel formula (either would work) that reliably searches the 2nd column for the word "Clear". I have tried different combinations of IFERROR, FIND, SEARCH, IF, ISNUM, etc. in hopes of writing a new adjacent column containing the values "Clear" and "Dyed". I have found many combinations that work if I search only the correct cell. But when I extend the range to search through ~26 cells in one row, they all fail. Below is a (small) example of what I start with and what I want to end with. I've also included my current relevant Sorting code in my macro.
FinPro
Sup
Veh
1Dn
2Cn
2Dn
Bio
Injec
[code]....
I have a spreadsheet that lists all the work done by employees within a specific area. Some employees cover multiple areas.
I am now needing to work out the average work completed by each area. I need a formula that will count the number of employees by each work area.
I know this is something I have done before, but my mind has gone blank and I can't for the life of me work it out again (it's one of those days).
Row 3 of the spreadsheet contains the codes for the work areas they cover (CM, V & TC) and some employees only cover one (which would be a simple CountIf) but some have multiple.
What is the formula to, for example, count the number of people who have CM in row 3 even if they also have other entries in that cell.
I would like to select all cells in column A that begin with the text "SP". Some cells will be contiguous but others will not. For instance in one case, I would like the macro to select cells with the text "SP" which would result in cells A1, A2, A3, A10, A15 being selected. I am working on building a macro that will then do other things to these cells/rows so this is the first step.
The below code will select the first cell with "SP". How would I alter this code to only search Column A and select multiple cells? or totally different code.
Code:
Sub test()
Dim r As RangeSet
r = Cells.Find(what:="SP", LookIn:=xlValues, lookat:=xlWhole)
If Not r Is Nothing Then r.Select
End Sub
Let me start by stating that I am a novice at writing macro script. I am trying to write a script that will open and search a Word doc, find specific text in that document, and populate certain excel cells with that information.
Ex. of Word doc:
5.1.2.3 Install gasket [12], using bolt [5] and nut [8].
5.1.2.4 Uninstall gasket [12] and scrap gasket and fasteners.
I would like the script to search for and populate any number between the [ ] into a specific excel cell, also I would like it to identify and populate an excell cell with the associated step, e.g.: "5.1.2.3", which will be at the begining of that step (step could be several sentences long). Also, I would like the script to look for and identify/populate an excel cell with any number of words such as: "install", "uninstall", "break", "scrap", or "remove" also associated with that step.
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
I am trying to find a solution for highlighting cells in a column that are repeats, ie. >3. I also need these cells to only be highlighted if the adjacent cell in the next column contains specific text. I have tried using conditional formatting with a countifs formula to no avail.
View 2 Replies View RelatedI have a large excel file with the top seven rows such as you see in the attached file. In row five there is a bunch of info before the month and the year. What I want to do is get rid of that info besides the month and year. I than want to sort each column by the month and year so that all the columns are in sequential order.
demo.xlsx
how to work macros or VBA
I have a workbook with multiple sheets named by month and year that I use to keep track of loans I work with at a bank. In these sheets I have info such as:
Column B = due date
Column D = loan# A
Column E = loan# B
Column F = status
Column H = followup needed
(Columns A,C, and G aren't important for the current need)
What I am trying to do is create a main sheet (TRACKER) that all I will have to do is press a macro button and it will pull info for each loan that is in a pending status.
I need a macro that will search column F (Status) on all sheets and find each instance of "Pending" and once that is done, copy rows B,D,E, and H in each "Pending" instance and copy them to their designated area on my TRACKER sheet. After that is done I need it to continue to the next "pending" instance and do the same on the next available line on my TRACKER sheet.
The overall goal would be that everyday I can press the macro and it will repopulate the sheet with the current pending items (as each day I will change pending status' to complete and no longer need to track it the next day).
I already have the tracker sheet set up and ready to go with the spaces as follows:
Column G&H = Merged cells where due date will need to go
Column I&J = Merged cells where loan# A will need to go
Column K&L = Merged cells where loan# B will need to go
Column M thru S = Merged cells where followup needed will need to go
I want Excel to play a specific sound when a "-" is entered in any cell. How would I go about doing this?
View 3 Replies View Related