I have tried to create a macro using the record function to copy and paste the user name from Tools/Options/General. The problem is that the macro does not record the copy function and reads like this
View 2 RepliesI need a macro that simply allows me to open the filter criteria dialog to "contains," then stops, so I can enter the value to be filtered. Macro recorder does not allow me to stop recording at the point the "contains" dialog appears.
View 3 Replies View RelatedI have had a search around but cannot find exactly what I'm looking for. I have a worksheet with data from B5-E10 and G5-J10. I need a macro which will insert two columns after column E. So then it would push what was in G5-J10 to I5-L10.
The macro would need to look for the blank column (column F) and then insert two columns before it. The columns will be constantly changing so that why it needs to look for that blank column. After they have been inserted would it be possible to give the columns headings such as 'New column 1' and 'New column 2' in row 4.
I have been tasked by the company I work for to come up with a simple to use interface that can be used by someone with little understanding of excel to set the autofilters to certain settings.
So here is what I have:
2 sheets (each with the same number of columns but different data which corresponds to good and no-good)
Each column has an autofilter but only two on each sheet need to be set.
One filter controls valve type (of which there are 10) and the other controls running condition (startup and normal)
Now my employer wants something that is basically idiot proof so that someone can simply open up the excel file, input the valve type and running condition, and be rewarded with only the corresponding data and charts. Now the filters are already in place, the charts already exist and the only thing left is the user interface.
I'm trying to create a formula similar to this: =sum(B7:B & 8*A2+3). What I want the formula to do is start in B7 and go to B###. The cell number is based on user input. So if the user enters "24" in cell A2, then 8*24 = 192, 192 + 3 = 195, so the formula would be: =sum(B7:B195). Can I do this in a cell, or do I need to run it in a macro?
View 2 Replies View Relatedthis is my first attemp at doing a "userform". I am looking for some help in creating a user form that enables users to choose items from drop down boxes, which shows next level drop down list items, then down to final drop down list with information based on first two choices. I've attached the sample file for reference.
View 3 Replies View RelatedIs it at all possible to create a User Form where the number of CheckBoxes will be linked to the number of entries in a cell range?
For example I have a 3 records in the range A:A called "Blue", "Green", "Yellow". I want to have a user form with 3 CheckBoxes with the same caption names.
I'm trying to create an auto fill pattern to match B4-M4 then repeat with B5-M5 and continue to 350.
So for example, I'd like to manually enter "B4,C4,D4,E4,F4,G4,H4,I4,J4,K4,L4,M4,B5,C5,D5,E5,F5,G5,H5,I5,J5,K5,L5,M5" into column A and drag the auto fill box down until I've repeated the pattern to match all the way to M350.
Is this possible? I tried just entering the pattern as I've posted and dragging the auto fill down, but it doesn't fill the numbers properly and ends up with a strange pattern.
Is there a way to auto name sheets within a workbook by creating a list. or by a different way.
Each list will have a person name.
i have a set of data range from B1 to K10 (10 cells all together).
and i created a graph by selecting from B1 - K10.
what i want is, if i key in range from 1-10 in A1, the graph will change based on the number i keyed in (from 1-10).
if i keyed in 5 in A1, the graph will auto select B1 to F1 and show data from B1 toF1
then if i select 6 in A1, the graph will auto select B1 to G1 and show data from B1 to G1
I have created a list in a Microsoft Excel Workbook (names and corresponding numbers) and named the list.
Then, I created a drop-down menu through Data/Validate/List that included the names.
I can look the names up in the drop-down box, but I would like to be able to type a few letters and Excel auto complete the rest of the name. For instance I would type Ja...and James Doe would come up with the mes Doe in black (highlighted).
Is there a way to do this in Excel?
If i have a userform: frmUpdateInfo
How do i have it auto open or at least be ready for use when going to a particular sheet in a workbook (Sheet name: "Matches")
Is there any way of creating a log that logs the last user that saved the workbook including the date and time. I would like the log to be a sheet hidden in the workbook. Not many people will be saving the workbook.
View 9 Replies View RelatedI am playing around with creating a calendar based on a date (month) I enter into a cell. I am doing this with a simple =date+1.
I have a sample attached. Only problem I am having is that for months with 30 days I don't want the last day to show the first of the next month. But I can't simply remove that as if I entered a month with 31 days I would need it to show the 31st.
I am trying to create a spreadsheet that uses a selection criteria based on different sheets within a workbook to output a costing quote, anything i can use as a template? I will post the sheet that i am working on that I need to combine into a working book.
View 2 Replies View RelatedI'm been trying to create a timesheet that will auto calculate the hours of normal / overtime 1 / overtime 2
Rules:
Saturday / Sunday / Public Holiday = Overtime 2
Monday to Friday (8:30 till 17:30) = Normal (Auto
Monday to Friday (17:30 till 22:00) = Overtime 1
Monday to Friday (22:00 till 8:30) = Overtime 2
* If Public Holiday column is set to 1 then all hours will auto set to overtime 2
* If Breaktime column is > 0 then deduct from total hours calculate
Sample:
Name
Date / Day
Public Holiday
Start time
End time
Breaktime
Normal hour(s)
Overtime 1
Overtime 2
[code]....
Without using VBA, how can i generate strings say
x1
x2
x3
x4
x5
assuming user has inputed two numbers 1 and 5. I know you might have lots of questions like how the hell user input is coming when there is no usage of VBA.
Excel 2003, I have a list of products with corresponding prices located on a hidden worksheet. I have a spot on another worksheet where users can select a certain product and next to that cell there is a column for price. What I want excel to do is auto-populate the price cell based on what product the user selects. For instance, if the user selects OD2000N, then I want the price to auto-populate with the corresponding price that is found on the hidden sheet. Like I said before, I know this has probably been answered, maybe even mulitple times but I can't seem to find the appropriate thread.
View 9 Replies View Relateddear friend in my document column "L" has some numbers & formulas.if any cell has formula base in that i need to inset rows below that formula cell & that formula need to spread on that new rows.i have 4 type of formulas.each formula has (1.5).that part is common. it 's like this...
(01.)ex- L1 cell =150*2*1.5 ,need to inset one row below this cell & after running the macro it should change like this..
L1 cell =150*1.5
L2 cell =150*1.5
(02.)ex- L1 cell =150*2*1.5+50*1.5 ,need to inset two rows below this cell & after running the macro it should change like this..
L1 cell =150*1.5
L2 cell =150*1.5
L3 cell =50*1.5
(03.)ex- L1 cell =150*2*1.5+130*3*1.5 ,need to inset four rows below this cell & after running the macro it should change like this..
L1 cell =150*1.5
L2 cell =150*1.5
L3 cell =130*1.5
L4 cell =130*1.5
L5 cell =130*1.5
(04.)ex- L1 cell =150*2*1.5+130*3*1.5+20*1.5 ,need to inset five rows below this cell & after running the macro it should change like this..
L1 cell =150*1.5
L2 cell =150*1.5
L3 cell =130*1.5
L4 cell =130*1.5
L5 cell =130*1.5
L6 cell =20*1.5
I have here an example of how I might extract data from a source workbook and paste it onto a template workbook, using autofilter to find the rows that are needed. It is currently set-up to take rows that match "AREA 1" or "AREA 2" in column A, along with a number of other criteria in other columns.
What I want to do is add into this macro, a way for the user to be able to choose the filter options will be used for column A of the source workbook. So if they want only "AREA 1", they can choose just that, or if they want "AREA 2", or perhaps both "AREA 1" & "AREA 2", or further additional options. They need to be able to specify just one, multiple, or all of the filter options with regards to column A of the source data.
In effect what I need is a user input box or form with a dropdown menu that will give the filter choices based on column A of the source data, and then for the code that copies the data across, to do so based on which choices the user makes in the filter menu of the input box.
I have uploaded examples of the source data workbook and the target template workbook. The macro exists within the template workbook.
[Code] .....
How it may be possible for the user to be able to specify, one, multiple, or all available filter options for column A of the source data, via a user input box or form.
Attached Files :
Sales Analysis Template1.xlsm
SOURCEDATAEXAMPLE.xls
I have a Workbook that has 2 worksheets, one called CALL QUERY and one called CALL LOG. On the CALL QUERY sheet, cell D9 is a user inputted cell with the cell validation set to list. The user uses the dripdown list to pick an office identifier (3-Letter Code).
On the CALL LOG sheet, I have info about individual calls. Column E has the 3-letter office identifier for each call.
I am trying to find a way to automatically auto filter the list on the CALL LOG sheet with the user input in cell D9 on the CALL QUERY sheet.
I was given the following (N2 is a cell on the CALL LOG sheet that equals the user inputted cell D9 on the CALL QUERY sheet)
I have a spreadsheet that I use throughout the day and have to send an email to another person when a customer makes a payment. The number of products they pay for will be different each time and I have the code to copy the right cells into an email and the code to insert the right number of rows for how many things the customer is paying for however as I use it multiple times through the day, I need the code to insert the right number of rows, copy it over to the email then automatically delete the rows it has just inserted so it is back to basics so I can use it again.
The code I have for the inserting the rows (from searching through forums) is:
Sub PRows()
Dim NextRow As Long
Dim NrOfCopies As Long
Dim i As Long
Const NrOfCopiesDefault = 1
Const NrOfCopiesMaximum = 9
[code]....
I have a workbook, "A", that while open I need to be able to detect any type of activity within other open Excel workbooks "B...Z" that are simultaneously open.
I understand that I would need to use the Class Module with a Public WithEvents function but I am stuck here.
I am using Microsoft Excel 2010 and Microsoft VBA 7.0 on my system. I would like to eventually create a PowerPoint and insert charts generated in the Excel workbook. In the meantime, I cannot get the basic PowerPoint created.
The line in red is highlighted blue when the compile error "User-defined type not defined" message box appears.
Public Sub TryAgain() Dim myPowerPoint As PowerPoint.Application
'
' do nothing for now
'End Sub
I have set the references such that Microsoft Project 14.0 Object Library is indeed checked. The Excel file only contains this code in a module. All sheets are blank. Nothing else is written yet.
I have a macro where I manually select a cell then the macro kicks in to copy and paste the contents into the Find function. From there it goes to another work sheet, clicks on a cell in column one and searches for matching cell contents. Then If false it manually goes back to the original worksheet/cell and then I input a N in the left adjacent cell. If true I enter a Y. Right now I can only run this for the specific cell the macro was recorded for. I would like to expand this.
What I would like to do create a loop in the macro that waits for my cell choice input then continues with the with the Find function. If false the macro should just loop back to the original worksheet/cell and wait for input, ie the next cell selected. However, if true a worksheet/cell is selected, a Y is input and it loops back to the original cell and waits for input.
I have a long complicated macro that processes a ton of data and gives the output in a new sheet. I then want to create new buttons (or some sort of user clickable triggers) on this new sheet that runs another macro.
I have got the actual adding of buttons in the sheet working, but I can't find a way to automatically assign macros to newly generated buttons during runtime. Is this even possible (or are there any clever tricks I could use to get around this?)
I use Excel 2003 at work. I'm looking for some code that will Open a folder and then lets the user to select a file then continues to run the macro.
The file name they select will look similar to this K2271011.504 or K3011111.201
I have written two VBA programs around the same time. Both run on open and pull external data and create graphs. My problem is that I want the end user to be able to run the report multiple times by choosing the name of the macro from the Excel macro menu (i.e. Tools>Macro>Macros) but only one of the workbook macros shows up on the menu. why the other macro is not visible on this menu???
View 2 Replies View RelatedI have recorded the following marco and it works fine. I would like to modify it so the user would highlight a range of cells rather than have the fixed area :
"'ConsExecProp@20120920'!R4C5:R113C21"
What code lines would need to be added?
Application.Goto Reference:="R4C5"
ActiveWorkbook.PivotCaches.Create(SourceType:=xlConsolidation, SourceData:= _
Array("'ConsExecProp@20120920'!R4C5:R113C21"), Version:=xlPivotTableVersion12 _
[code]....
I am trying to make a save&close workbook macro.
I found several examples on google, but unfortunatly it conflicts with another macro I use for forceing users to enable macros (hide all sheets except one if macros are disabled).
The attached file is an example contaning the save&close code and the show/hide sheets depending on macros enabled.
If the file is opened with macros disabled then only one sheet will be visible.
If the file is opened with macros enabled other sheets are visible.
The problem if that this code uses a custom save, witch makes the save&close not save... (in module1 and in ThisWorkbook)
The pourpose of the save&close is to make sure some users don't forget the excel open and thus block access to it. So if a certain idele time passes excel has to save and close without any confirmation messages.