Inset Rows & Fill That Rows Base On Formula
Feb 15, 2010
dear friend in my document column "L" has some numbers & formulas.if any cell has formula base in that i need to inset rows below that formula cell & that formula need to spread on that new rows.i have 4 type of formulas.each formula has (1.5).that part is common. it 's like this...
(01.)ex- L1 cell =150*2*1.5 ,need to inset one row below this cell & after running the macro it should change like this..
L1 cell =150*1.5
L2 cell =150*1.5
(02.)ex- L1 cell =150*2*1.5+50*1.5 ,need to inset two rows below this cell & after running the macro it should change like this..
L1 cell =150*1.5
L2 cell =150*1.5
L3 cell =50*1.5
(03.)ex- L1 cell =150*2*1.5+130*3*1.5 ,need to inset four rows below this cell & after running the macro it should change like this..
L1 cell =150*1.5
L2 cell =150*1.5
L3 cell =130*1.5
L4 cell =130*1.5
L5 cell =130*1.5
(04.)ex- L1 cell =150*2*1.5+130*3*1.5+20*1.5 ,need to inset five rows below this cell & after running the macro it should change like this..
L1 cell =150*1.5
L2 cell =150*1.5
L3 cell =130*1.5
L4 cell =130*1.5
L5 cell =130*1.5
L6 cell =20*1.5
View 9 Replies
ADVERTISEMENT
Dec 20, 2007
I am trying to fill in reference cells horizontally but fix the column and increasing the row number as it fills. For examples I want to start my refence as "=A1" in cell B1. I want to copy this reference horizontally to column Z1 but want the refences to be A1, A2,...,A26. Excel only seems to increase columns when filling horizontally and rows when filling vertically. Transpose works but it's an array which would slow the spreadsheet down.
View 4 Replies
View Related
Oct 12, 2011
I have a worksheet with 40 colums and 9200 rows. There are columns with empty data in the rows. Can I have a macro to copy data in the rows in Column E, F, I, J K and L to empty rows below?
View 3 Replies
View Related
May 15, 2009
I got the following loop that is very slow. The main way (I think) to speed it up is to avoid looking at all the 65000 cells. The columns used in the calculations have data varying from a few hundred cells up to (rarely) dozens of thousands. I assume it would be better if I could replace the 65500 with something indicating the "end" of the data in the column. Also, is there another way to do this process without using a loop?
I am trying to fill in a number of rows with array formula's in the adjucent cells. I use the loop because the number of rows depends on a selection of another parameter which sets the row number before calling the loop.
View 5 Replies
View Related
Mar 2, 2014
b2 = a2 * 150
c2 = a2 * 145
d2 = a2 * 140
e2 = a2 * 135
[Code].....
in the first row i want to use the fill handle at 135 and drag rightwards so as to copy/retain the pattern (decrementing by 5, from multiplier 150 until 100)
how would I achieve that?
p.s I also want the formula for columns to work with the fill handle drag downwards.
View 1 Replies
View Related
Apr 8, 2014
I am trying to insert formulas to my cells in different columns and then fill down the formulas as many rows as in the reference column. So far I have put my formulas in a macro but I seem to get problems with " and ' symbols. My macro looks like this:
Sheets("Sold Articles Database").Select
Range("U3").Formula = " =VLOOKUP(LEFT(K3,2),'Input Variables'!$A$48:$B$52,2,FALSE)"
Range("V3").Formula = " =VLOOKUP(K3,'Product datas'!$A$2:$C$10000,3,FALSE)"
Range("W3").Formula = " =VLOOKUP(K3,'Product datas'!$A$2:$D$10000,4,FALSE)"
[Code] ........
View 3 Replies
View Related
Oct 30, 2009
Have 2 listboxes, the contents of the second (fmmultiselectmulti) is populated based on selection of first. Sometimes (50%) when I open the workbook I receive a "Object Required" runtime error..
Private Sub ListBox1_click()
Select Case ListBox1.Value
Case "All"
ListBox2.ListFillRange = "_Sheet2!A1:A1"
Case "A"
ListBox2.ListFillRange = "_Sheet2!B1:B18" <--- example of line that gives the 424 - Oject Required
Case "B"
ListBox2.ListFillRange = "_Sheet2!C1:C18"
End Select
End Sub
Looks as though sometimes when it runs, listbox2 is not yet initialized ?? If I go into Debug and look at ListBox2 it shows up as type "Variant/Empty" and not " ListBox/ListBox" ??!!?? Is this some type of timing/race condition on the loading of controls ? I'm out of idea's. Both listboxes are on the same worksheet (Sheet1). The ListFillRange for Listbox1 (which is a fmmultiselectsingle) is hardcoded and also references a range in _Sheet2 - no problems with this control.
View 2 Replies
View Related
Apr 8, 2009
I have accounts that I need to compare to see if they exist on my system the account that has a listed date, exist on my system then if I can fill the dates in the accounts the match then I will be able to delete the other accounts that don’t have a date see attach file for more understanding.
View 2 Replies
View Related
Jun 9, 2009
I have a macro which is copying data from several worksheets into one consolidation worksheet. When determining where to paste the data into the consolidation sheet, the macro includes some logic to find the last row that has data in it (using e.Range("A65536").End(xlUp).Row, where "e" is a variable holding the name of the consolidation worksheet).
Once all the data is on the consolidation worksheet, I have a second worksheet with formulas that link to the consolidation sheet. The issue I have is that the first step of my consolidation macro deletes all data on the consolidation sheet to ensure that no data is double-counted). I am deleting the data with logic that simply deletes all rows from 3 to 65536. Once these rows are deleted, Excel returns a #REF! error on my second worksheet which is linking back to this data.
Rather than deleting the rows on the consolidation sheet, I have tried using the Clear and/or ClearContents commands instead. This works (i.e., my formulas no longer error out), but results in the consolidation macro running very slowly (~15 minutes, compared to
View 9 Replies
View Related
Sep 30, 2008
I have the following codes to delete all blank rows in column A
Dim lastrow As Long
lastrow = Sheet1.Range("A" & Rows.Count).End(xlUp).Row
MsgBox lastrow
With Sheet1
For t = 1 To lastrow
If Cells(t, 1) = "" Then
Rows(t).Delete
End If
Next t
End With
End Sub
Although it is working , it is not deleting all the blank rows at once, I have to keep pressing on the macro button running the macro several times, until all blank rows are completely deleted.
View 9 Replies
View Related
Jul 31, 2009
I would like to fill the empty rows with value from the row before them that has a value.
row 1 has a value "a"
and row 2-5 has no values
row 6 has "b"
then row 7 has no value etc...
i would like help getting row 2-5 filled with a, and row 7 filled with b and any subsequent rows that may have a value
View 2 Replies
View Related
Sep 9, 2008
I have a macro that selects a range of about 20 columns and fills down. It works fine on my smaller set of data, but when I use one that has about 40,000 rows I get the error:
FillDown Method of Range Class Failed
It fills down about 7,000 rows, then fillsdown the first cell of the next row, but leaves the others blank. The entire range (including the nonfilled cells) is still selected.
View 9 Replies
View Related
Jul 18, 2006
is there any easy way to fill alternate rows of a worksheet with a particular color? I have a worksheet with 175 rows and alternate rows are to be filled with green!
View 4 Replies
View Related
Jan 4, 2007
I want to copy an active cell in row 2 (I dont want to fix a cell as it can be any cell at any time). I want to copy it all the way down to a cell where the next row after it, is completely blank on all the 256 cells.
View 6 Replies
View Related
Mar 18, 2008
I have 4 columns. I want to add 100 to all rows in the first column, 150 to the ones in the second, etc. Is this possible? I have Excel 2007.
View 9 Replies
View Related
Oct 21, 2013
My merged cells are not purely aesthetical - each merged cell (covering 6 rows in total, beginning at A3:A8) has colums and rows to the right for other details/formulae relating to that specific merged cell (which contains a customer account name).
The list I'm trying to reference is on a seperate tab - 'Projects' starting in cell A4. This list will have project names added to it, so I need my merged cells to reference the list, and subsequently pulling through all new additions to the list, rather than having to add them on a 2nd time.
View 8 Replies
View Related
Apr 15, 2014
I have a pivot table full of data that needs a macro/vba/something to loop through it and hide all rows that have no fill color. The table had 210 rows so I want a quick way of hiding the irrelevant ones (only the ones filled in green or red), and so all the ones with no fill need to be hidden. Something like a button to hide/unhode would be ideal.
View 4 Replies
View Related
May 21, 2014
I want to write a macro to fill color in row 8 of the worksheet as solid black . Also columns P,T,AP,BC ,BE and BG should be filled solid black and width should be 1 for the row and the column.
View 7 Replies
View Related
Aug 21, 2008
i found a link to my problem in the subject title below,
http://www.ozgrid.com/forum/showthre...t=45580&page=2
The guy at the end of the post says he got it working in the end, but no one seems to have posted the final solution - could someone tell me if the solution is actually in the thread, and if so where!
My problem is outlined by this guy - basically i want to be able to delete rows in a range that have no fill color, and so keep the ones that are colored.
View 9 Replies
View Related
Sep 18, 2012
I have a table = Columns A - E contain data in a variety of formats
Code1
Code2
Code3
Code 4
Code 5
Code6
dog
9
12/1/1987
hamster
dog,9,,12/1/1987,hamster
What Column F (code 6) should contain is a csv of Columns A-E as shown.
What formula for Column F will automatically fill the values for all data within a row in a csv?
View 6 Replies
View Related
Feb 1, 2013
I need a macro that will count the number of rows that contain values in column C. I then need to Fill cells in column A with the text "product", cells in column D with text "P", and cells in column I with text "Right" until a blank is found in column C.
View 2 Replies
View Related
Jun 25, 2007
How do I have the marco delete rows if the O column = a certain cell.
For instance my O column has a bunch of colors
Cell N1 list one color (red) and I want the macro to delete the rows that contain the color from N1 in column "O".
View 9 Replies
View Related
Apr 10, 2014
For my thesis dataset I am looking to insert two rows after every six rows (the company name) in a dataset with approximately 30,000 rows.
For the first extra row that would be cell 4/cel6
For the second row that would be cell 5/cel6
A picture is added below in which I have manually entered these formula. Is there any way to make this a swift operation rather then a manual one?
untitled.JPG
View 1 Replies
View Related
May 28, 2014
Data file with few columns. There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
See here Fill Cells.xlsx
View 1 Replies
View Related
Dec 16, 2012
auto fill the rows after selecting a particular option from a drop down list. For Ex., In Drop down list we have Cool drinks and Ice cream as two options. If i select Cool drinks the respective columns should be filled with brands like, Coke, 7 Up etc...
View 3 Replies
View Related
Jul 21, 2014
I want to fill an array from values in range A1:H10. I want to fill the array with all rows in range and only columns B,C and E. I have the code below so far using index function.
Is there a more direct way to select all rows from desired range to avoid the need to create an array of rows from 1 to LastRow and then use Application.Transpose(RowsArr) (in red) inside Index()?
View 3 Replies
View Related
Aug 18, 2007
regards the two attached files (both are identical) except '1' has TWO Rows of data above the Macro Button and works correctly whereas '2' has only ONE Row (the desired option but does not work correctly!( Inserts Row in wrong place and incorrectly fill series)).
basically the program inserts a additional row below the last data entered, copies a formula cell from above and finally (the problem area) Series Fills a cell from data above.
View 10 Replies
View Related
Mar 22, 2007
Is there a way to color fill an entire row based on a value in a certain column? Say I have a large file and one column is "yes" or "no" If I wanted all of the "yes" rows to be colored -
View 5 Replies
View Related
Feb 26, 2008
Suppose in cell A1 I type in the number "100" and in A2 I type in the number "5"
What I want to do: Have the number "100" repeat 5 times in a vertical list (so 100 appears in B1, B2, B3, B4, B5)
View 2 Replies
View Related
Jan 31, 2014
I am a locksmith and attempting to write a spreadsheet app. for my line of work. The output page will use columns A-G and rows 1-?10000? depending on the size of the system. If a 5 pin system is requested then columns A+B will be blacked out. 6 pin system A is blacked out. 7 pin system nothing blacked out. Also, if any cell matches the master key that was input, that cell is filled with red. I know, confusing.
Basically, I am trying to remove the blacked out columns automatically, and to remove the enitire row is any cell in that row is filled with red. Then to remove blank lines.
View 2 Replies
View Related