I have a file that uses dates, when a cell is in date the cell is "GREEN" but when the cell is out of date after 3 years it turns "RED". I want to add another formular so that when it gets to 2 years & 11 months the cell will go "YELLOW" for 1 month only before it turns "RED".
View 3 RepliesNeed to create year to date sales comparing 4 years month by month. Stacked chart (Excel 2010) works OK for the first three months but adding the fourth month changes the chart to 4 series with a monthly axis. To put it another way I need a vertical axis of years and a horizontal axis of $$$ with each months sales of each year stacked on its year.
View 10 Replies View RelatedI would like to calculate the number of years and months that have passed since a certain date. Would like it in a number format so I can pickout those who have gone reached 5 year increments during each month.
Such as someone reaching 40 injury free years in June of this year I can let them know.
Here is my formula:
=E3*(1+E9/365)^(365*E5)
Cell E5 contains a place for you to put in the number of years you want
I want to modify this formula so that it calculates months instead of years, but still be based of a 365 day calendar year.
I have some cells which must be in the format 15/06/2007 15:25
I then need to add either days, months or years onto it.
Say the above date/time is in cell A1, when I do =YEAR(A1)+5 it displays 2012 if I choose the general cell format, but when I select the same cell format (date time) it comes out as 04/07/1905 00:00
This is for a report and on "Summary Worksheet" I want to post "Current Payment" totals IF the invoices from "Tab 3" equal the "month" in G6. Say the report is for January - if there are invoices on Tab 3 -worksheet with a January date I want to post all invoice amounts on Summary worksheet under current payment.
View 4 Replies View RelatedSee attached. (I added in some arrows for the first month so it is easier to follow the logic)
I am working with monthly revenues. Revenues are earned in a specific month but only a % is received in that month and over the next 4 months. I need a formula that will spread these revenues earned in 1 month over the next 4 months.
Currently, I have a complex Index/Match formula which works until September. September, October, November, and December do not work correctly because once the months roll over from month 12 (December) back down to month 1 (January), my formula cannot recognize the range.
Essentially, I need the formula to return the correct amount that is being paid, even across different years.
I don't know if my formula can be modified or a new formula would be more efficient.
(This post originated from Commercial Services, which I just requested be removed from that forum)
I am using the following formula to calculate years months and days in Excell 2007
=DATEDIF(C7,D7,"y") & " yrs, " & DATEDIF(C7,D7,"ym") & " mths, " & DATEDIF(C7,D7,"md") & " days"
C7 3/24/04
D7 1/4/08
What is returned is 3 years, 9 months, 136 days
How might if fix it show the correct days?
I have come accross this calendar online and it suits my requirements, however, the month s currently static and the year is dynamically controlled by a spin button.
The formulas in the relevent days are as follows
Day 1 =IF(AND(YEAR(JanOffset+1)=calendarYear,MONTH(JanOffset+1)=1),JanOffset+1,"")
Day 2 =IF(AND(YEAR(JanOffset+2)=calendarYear,MONTH(JanOffset+2)=1),JanOffset+2,"")
and so on, I need the formula and the spin button the also change the month as well as the year.
Please see attached file for details.
Is there a way to show in excel that something feel within a specific time frame? An example being if I want to see the amount of time it took to close a customer service ticket. I would take the closed date minus the raised date, but then I would like to show in a cell it was open from Feb to Mar 2011.
View 5 Replies View RelatedI am looking for a formula that will add months and return the year. E.g. if I add 1.05 and 1.07 I should get 3.01. i.e. 3 years and 1 month.
View 9 Replies View Relatedis there a formula i can use to sum the sales revinue column of the attached per month into the yellow highlighted cell @ the bottom?
View 2 Replies View RelatedI am trying to get mmm-yy date format for the next 2 consecutive months from now. I used the following code for that reason, but I am not getting.
strDate = Format(DateAdd("m", 1, Date), "mmm-yy")
strDate = Format(DateAdd("m", 2, Date), "mmm-yy")
However if I use this, I get the current months date correctly (like May - 08)
strDate = Format(DateAdd("m", 0, Date), "mmm-yy")
I need an IF formula, that states if a date is more than a month after the date in the cell then it is timely and if it isn't then it is not timely. For example the date in A1 is 12/11/05, if the cell is A2 is 13/12/05 (or any date after that) then A3 should read Not Timely, if A2 is 12/12/05 (or any date before that, including a date before the date in A1) then A3 should read Timely. Is there any way to do this?? At the moment I am having to go through manually and put in either Timely or Not Timely.
View 2 Replies View RelatedIn the attached workbook - the stock Inventory is increased, every second day, by the value shown in cells of column A. Column B displays the date of the update. I'm looking for a Formula (might be an Array Formula) that will return the latest date before the stock turns to be greater than the value in cell D3. I managed to solve it, in cell F3, but with the help column C.
View 2 Replies View RelatedI have a workbook with two worksheets. I added a formula to the first worksheet
= COUNTIF(Scorecard!H3,"K"). It works fine when I add another COUNTIF that references another column (baseball fans may realize I'm counting total strikeouts for a batter): =COUNTIF(Scorecard!H3,"K")+COUNTIF(Scorecard!L3,"K") However, when I try to expand this to cover more columns, =COUNTIF(Scorecard!H3,"K")+COUNTIF(Scorecard!L3,"K")+COUNTIF(Scorecard!P3,"K")
Excel automatically changes the format of this cell to "Text" and it shows the formula as text instead of calculating it. What could be wrong here? Excel's documentation is woefully inadequate for cases like this. Is there an undocumented limit on how many times I can add COUNTIFs together?
I have a date 07/28/2027 and need Excel to calculate a date 65 years in the future taking into account leap years.
View 9 Replies View RelatedThe issue is i want years and months between two dates which are not in computer language. Date like 2008/12 and 2010/01. File is attached for you reference
View 2 Replies View RelatedPlease refer to the attached screenshot of my working spreadsheet.
I'm attempting to concatenate lines 86 and 87, month and year together.
The formula I use is: "=C86 & C87" - but I get a large number instead of "October 2009"
I have been trying to figure out a formula to convert the amount of months in a certain cell to years.
I have come up with:
=INT(E29/12)&" years "&MOD(E29,12) & " months"
The problem is it comes up with 2 years 3.37063951499227 months
How I change it to come up with 2.4 months, round it to the highest number instead of loads of decimal places? I have tried change cell E29 do 0 decimal places but it doesn't work.
I was asked by a colleague how they could put a persons date of birth in one cell, todays date in another, and return their age in years and months. Accuracy to within a month. This is what I gave them.
=TRUNC((B1-A1)/365.25)&" Years "& ROUND(((B1-A1)/365.25-TRUNC((B1-A1)/365.25))*12,0)&" Months"
Which formula should I use to return years and months between two dates.
4/1/05 7/30/25
Was needing to calculate years and months returning it such as 2.10 if 2 years and 10 months.
And also if left blank would not return any value. (There might not be a date yet in H3 in some cells.)
G3 thru G1000 has the hire dates. H3 thru H1000 will be the cell for the formula.
I have two columns with dates (and times) in that I am trying to define how many days, hrs and mins have elapsed i.e. A1 has 12/12/06 21:00, B1 has 17/12/06 21:00. C1 has B1-A1 and is custom formatted to show as dd"days" hh"hrs" mm"mins". In this case it will therefore show as 5days 0hrs 0mins. Which is correct.
However, if more than 1month has elapsed then the format m"m" d"days" h"hrs" m"mins" does not work. For example 17/03/06 03:00 to 20/12/06 07:00 shows as 10m 4days 4hrs 00min, which it clearly isn't.
I know the reason it does this is because it calculates the difference between the two times and adds that to it's 0 value, which in my format is 01/01/1900 00:00. therefore when it adds 277days (the answer) it becomes 04/10/1900 04:00, so my formatting is just calling the month value ('10') and the day value ('4').
I understand the reason it does this, 277 days on from 01/01/1900 is indeed Oct 4th, but 277 days on from 17/03/06 is not 10months and 4 days as there are different length months in between. It also seems to add a month on, possibly because the format for 'months' is between 1 & 12 and therefore cannot begin at 0?
Does anyone know if it's possible to force excel to work out the correct number of months and days have elapsed between two dates and not apply it to 01/01/1900? Or any other possible solution, maybe with a different custom format?
my spreadsheet is setup with two dates: A date for when someone joins our group A date for when they are released/leave
I want to be able to see exactly how many years/months/days transpired between these two dates. I have tried lots of different formulas with no success.
I will set a base example first:
9 Nov 2012 Apple 5
12 Dec 2012 Apple 3
14 January 2013 Banana 8
17 January 2013 Apple 6
20 January 2014 Apple 3
I would like a sumifs formula that will only add the results for Apple - as follows:
Nov 2012 5
Dec 2012 3
Jan 2013 6 (i.e. does not include Banana - and also does not include Jan 14 Apple)
Although I have experience with sumifs I have not been able to use the correct syntax to identify the month AND year.
Ultimately I want to look through many hundreds of dates, and add anything that fits two criteria - 1) a 'name' criteria, and 2) it falls within a certainly month and year.
I have a large sheet of daily river flows and precipitation amounts, over 40+ years.
I want to calculate the average flows in each month of each year (ie 11/1968, 12/1968, 1/1969 etc). Dates are in Col A, flows in Col D.
How to average a particular month over all years like so:
{=AVERAGE(IF(MONTH(A2:A15282)=1,D2:D15282))}
But I don't know how to average per month of each year, or how to make a formula that will allow me to quickly calculate the averages of 100s of months.
ith the example below, i am having a problem with the calculation of Total Month. If i put Dec 31 2012 in A2 the total month is 10 BUT if I change the A2 to Dec 30, 2012 the total month is 11. What i am trying to do is to calculate the number of months only disregarding the years. example August 15, 2010 and January 16, 2013 i need to have total months of 5 months only.
A
B
C
1
First Month
2nd Month
Total Month
2
12/31/2012
11/30/2013
=DATEDIF(A2,B2,"ym")
3
I have a start date dd/mm/yyyy, and require a formula that everytime a spreadsheet
is opened, based on the current date, to calculate how many years, months and days
have elasped yy mm dd since the start date...
My date formula knowledge is a little limited.
I have a file where the cells are all formulas.
Employees are able to key in a number instead of using the number derived from the formula.
I want the cell to use conditional formatting without the use of macros, so it will highlight yellow if the cell is keyed in instead of a formula.
Is this possible? I have tried numerous things, but none seem to work.
Example:
Cell A6 has the number 24,248 derived from a formula.
Employee thinks the number should be 30,000 and keys that number in.
If it is 24,248, I want the number to have no fill, but if it is a keyed in number, I want it to be highlighted.