i have a slight problem with the days360 formula. Normally it works but today it keeps returning #VALUE! error. I've tried fomatting the columns to dates and also have done the text to columns but it still doesn't work.
I copied and pasted the data as values from MS Access, perhaps this is causing the problem. It works if i type the data into Excel but not when i copy and paste the data from Access.
I have a series of data that acts upon a traffic light system, i.e. Green, Amber and Red. These variables are posted along row 1 for example and there are 10 columns. Per column I have a tick and cross to answer a question. How can I find out how many ticks were on green days, amber days and red days? I have attached an example.
View 4 Replies View RelatedI have two rows of data, Date and data.
I want to continously figure avg for last 7 days, 30 days.
I am currently using the following formula which has been working great for what we needed it to do:
=IF(ISERROR(NETWORKDAYS(O34,Q34,Holidays!C$2:C$20)-1),"Not Completed",NETWORKDAYS(O34,Q34,Holidays!C$2:C$20)-1)
The formula determine what was been completed on the previous work day. If it fell on a weekend or a holiday specified in another table, it would consider it the following weekday's work. However, the needs of management have changed and they would now like to see anything completed on a weekend or holiday push back to the previous weekday and I'm not exactly sure how to modify this formula to do that.
As an example, work was completed over Good Friday. Yesterday (Monday) when we ran the report, none of those showed up in our list of completed items until today (Tuesday). They would have liked those numbers to be included on Monday's report to get an accurate picture of work that was completed.
I have attached some sample data. Everything completed on the 18th, 19th is counted as 1 day behind but we would like 18th and 19th to be shown as 2 days behind, just like April 17. That way, if we ran the report today and set the filter to 1 (for column C), those items would not show up, but they would have shown up on yesterday's report.
Sample.xlsx
I would like to have a formula in a spreadsheet of personal bills that counts down the number of days until each one is due each month.
In one column, I have a digit in each cell to represent the day of the month each month that the bill is due. Someone helped me with a formula that can count down days to a date that is a higher number than the present day of the month, but can I get a formula to count the days from, say, December (or any month) 28th to a due date of the 6th (of the next month)?
Is there any simple formula to get no. of days in a month?
View 9 Replies View RelatedI have a formula in column E: =NOW() for the date.
I need a Formula in Column H from H11:H300 such that:
i) when a date is entered in G11 the number in Cell H11 should be a difference between G11 and D11 as in rows 11, 13, &14 and
ii) Until a date is entered in cell G11 the difference should be between E11 and D11 as in ROW 12
Below is an example of what I want.
D E F G H8 Date Days9DateStatus as of Expected ActualTOTAL10out of order8-Aprin orderin order114-Mar8-Apr14-Mar101210-Mar8-Apr29134-Mar8-Apr6-Apr33141-Mar8-Apr31-Mar30
Is it possible to have Excel calculate using a fill down formula the number of days between a reoccuring value in a column? For example, I have column A formated as a DATE column containing every Wednesday and Saturday of the week for all of 2006. Column B has the value 21 in day intervals of 3, 5, 7, and 6 days. Currently, I'm counting the days (or ROWS) in between each time 21 appears manually. It would be cool if Excel can count the days in between each occurance of 21 using the DATE Data column on Column A.
View 5 Replies View RelatedI have a sheet that shows employee absences, I require a formula that will look to see if a friday and a monday are populated and auto-populate the saturday and sunday to match the run, if the only the monday is populated then the saturday and sunday need to stay blank, if only the friday is populated then I also need the saturday and sunday to stay blank.
I have attached a sheet with the current display and the desired outcome.
fill test.xlsx
I am trying to put a time sheet together that will place the number 8 in a cell when the work "sick" or vacation is in another cell.
For example, if I am out sick on monday, I would like to put "sick" in the cell next to monday and have the number 8 be placed in another place. Then If I am out "sick for three days I would like all of those "sick" days to add up to 24.
Am attaching herewith one sample file. In the column G are the number of days as at 31-12-08. I want the value corresponding to that those days to populate in respective slot of days in either column H or I or J or K. E.g. stock number e (in cell A6) is having number of days 453, hence the value 110.920 (cell E6) should fall in cell J6. However i am want the single line formula which will validate in which cell the value should fall.
View 5 Replies View RelatedI'm have problems workdays in a month. I have highlighted errors in red.
Sheet1
ABCDEF1JoinedPosition EndJan-12Feb-12Mar-12Apr-12213/06/1101/01/1222212221331/01/1122/03/1322212221419 ...
I want a formula to add the number of days to the date
Such as 90 or 180 days for this date 01/01/2014
we have salespeople in all 50 states and each state uses different rules for business days. Some states include Saturday as a business day, some don't, and Alaska uses 5 business days including Saturdays. We are open 7 days a week.
What I am trying to create is a worksheet that has each day of the month going down and in the cells next to it, a column for states that include Saturdays as business days; so a date 3 business days out would appear in the next cell. In the cell after, a date 3 business days out not including Saturdays. And in the last cell for Alaska, a date 5 business days out including Saturday. Of course federal holidays are all excluded.
Something like this:
March w/ Sat w/o Sat Alaska
1 5 5 7
2 5 5 7
3 6 6 8
4 7 7 10
5 8 10 11
Now Vermont has extra holidays certain months so I would have to adjust that in the formula for the middle column during those months.
I need to create a formula that calculates the number of days a person has worked within a quarter, if they have also left the organisation within the same quarter.
For example, I have someone who left on 26/08/08. I need to establish how many working days this person actually worked within the quarter (01/07/08 - 30/09/08). I need to do this for a large number of staff, so would appreciate it if anybody can let me know whether there is a formula that would calculate this.
I have a formula which calculates number of days remaining. But I need a formula to to know how many days passed after a particular date.
Example :-
Date .Days passed
10-Feb-2010 .6
=IF(ISBLANK(G14),"",IF(TODAY() > G14,"LIC EXPIRED",G14-TODAY()))
I have checked searching the forums for this but nothing that really matches what I am looking for. I am trying to, from a date, deduce how many days there are in that month. I have tried a solution where I look at EOMONTH adding and subtracting but this is quite cumbersome. Is there some code out there where someone has solved this?
View 9 Replies View RelatedI have a sheet that has a start date and an end date for holidays.
The start date for the test holiday is 23/05/14
The end date for the test holiday is 15/7/14
I need a formula that will calculate how many of the holidays (work days only Mon-Fri) fall in each month from May through July.
I am trying to create a formula that will count days since an incident. Column A will have each day of the year in it Column 2, I would like to have 0 in it for each day In the event of an incident, I will replace the 0 with a 1 - but this should only happen on the date, rather than be maintained daily, if you take my point. I would like it to return a value based on todays date, counting the days in between today, and the last 1 entered. It is to cover the whole year.
View 5 Replies View RelatedI am looking for a formula that looks at a date and could add business days to it.
for example:
If the date in a field is Monday, 15-dec-08 and my formula is to add 5 Business days (mon-fri) to it not including that date. The desired result would be Monday, 22-dec-08 but my formula gives me 20-dec-08
I am creating a tracking spreadsheet and I will need to f/u on a process 30/60/90 days out from a particular date. Example: CPAP Therapy began 1/22/09 and I need to follow-up by 2/22/09. How do I create formula to add 30/60 or 90 days out from the setup date?
View 6 Replies View RelatedSheet1!A1 = Sat
Sheet2! A2 = I need this to equal Sun....
I tried =sheet1!A1+1 but got #value
Total amount to pay by D -
2839300284
Description of Customer
Txn Date
Amount Paid
[Code].....
In cell A1 = 15/06/2006 (dd/mm/yyyy)
What is the formula to find how many no. of days in month provided in cell A1.
Heres what I am trying to do:
I have a due date of 30/10/2007 in cell A2, I would like the cells in row 2 to change to the colour green 15 days before the due date (15/10/2007) and then I would like Row 2 to change to the colour Amber 10 days before the due date (20/10/2007).
This is what I was trying to do but it is not working for me:
____A_______________B__________C
1___Due Date________15__________10
2___30/10/2007______=a2-b1______=a2-c1
The Formula in B2 and C2 work fine.
I was then thinking that I could put a formula in Conditional formatting that says something like
If todays date is equal to b2 then Green else do nothing or If todays date is equal to c2 then Amber else do nothing
I can't figure out the formula for that though.
I am using the following formula to calculate years months and days in Excell 2007
=DATEDIF(C7,D7,"y") & " yrs, " & DATEDIF(C7,D7,"ym") & " mths, " & DATEDIF(C7,D7,"md") & " days"
C7 3/24/04
D7 1/4/08
What is returned is 3 years, 9 months, 136 days
How might if fix it show the correct days?
There are dates in column C and I need to count how many days are coming due within 90 days of each date based on the today() function but do not exceed the 90 days.
Countif Today()+90
I am making process TAT(Turn Around Time) which required following information. In Excel 2007.
1-Count number of days between two dates where working days are (Sun to Thursday). So required to exclude (Friday,Sat + Holidays)
A1-Start Date Mar/01/2014
B1-End Date Mar/31/2014
C1-No Of Days 22
D1-Days between two dates 21
E1 To E10-Holidays
2-Count number of days between two dates where working days are (Sat to Thursday). So required to exclude (Friday + Holidays)
A1-Start Date Mar/01/2014
B1-End Date Mar/31/2014
C1-No Of Days 27
D1-Days between two dates 26
E1 To E10-Holidays
Note : Any weekend (off days) dates listed in holidays should not effect the query.
I wish to create a spreadsheet which has formulas which would enable me to see if a patient has had more than one referral created within the next 30-90 days [the actual number of days not important - the ability to modify the formula to reflect which time period required would be cool] and also to see if a patient has been referred for the same medical condition again. Thus in my mind at least two different formulas - has the patient been referred again within a time period of days and has the patient been referred again for the same medical condition.
Attached is an example referral spreadsheet I have created
I have a workbook with two sheets. The first has a list of job positions open, columns designated to stages in the employment process and in these columns, my staff enter the dates that they completed a particular stage.
"Position | Date Opened | Stage 1 | Stage 2 | Stage 3 | Stage 4"
Pos 1 | 01/01/2014 |02/01/14|03/01/14|07/01/14|09/01/14
This has a great number of entries and they are increasing and decreasing every day depening on the amount of jobs available.
On the second sheet, I am trying to set up a table which shows the average working days it is taking to complete each stage, divided into the months in which the job position was opened (i.e. for positions opened in january, the average completion working days for stage 1 was X amount of days etc...)
I have tried using =IF(AND(Logical, Logical),TRUE,FALSE) but this doesn't return any info as the logicals will always be false. I tried the OR function, but that requires only one of the criteria to be true to return a value. What I need is for the formula to return a number of days between two dates, ONLY if the opened date falls in one month.
