I have created a spreadsheet that uses checkboxes. When deleting a particular row that is no longer needed, it leaves the check boxes. Is there a way to link them to the cell (which contain formulas) so when the row is deleted, I don't have to delete each individual check box.
View 9 RepliesCreating macros in excel. I am looking for a way to delete a row at the active cell. So far this code does the job for me:
Code:
Sub slet()
ActiveSheet.Unprotect
ActiveCell.EntireRow.Delete
ActiveSheet.Protect DrawingObjects:=True, Contents:=True, Scenarios:=True _
, AllowFormattingCells:=True
End Sub
But I want to make it impossible to use this code on the first 4 rows.
How do I determine which control the user is currently modifying on a multipage form (either changing, enterying or exiting the specific control). when I use "userform1.activecontrol" i get "multipage1" as the control name but I need the actual control on the specific active multipage. (also the .TABINDEX is for the multipage regardless of the on-page control) I use a generic data-field change SUBroutine so need the control name (and the TABINDEX) to provide my SELECT CASE. (so every fieldname_CHANGE calls the same SUB [with no parameters])
View 3 Replies View RelatedHaving created a spreadsheet with active x calendar control I find that if the worksheet is password protected I'm unable to use the control to enter a date. Take the password off and it works fine. Is there a way around this??
The password for the attached example is "date"
I have joined out of desperation relating to a problem with an Active X control inserted into a userform. This control accesses and returns data from an instrument on the RS232 PC comms port. All works well until I try to save, copy or print the workbook using usual VBA code, then mysteriously the code just stops, and Excel needs to be restarted again. It seems to just get lost!
View 2 Replies View RelatedHow can I tell (in code) which is the current tab selected on a MultiPage?
View 6 Replies View RelatedI have created a user form and I am trying to get the active control colored. I am using the code from Mr Excel's VBA book - starts on page 454, and I have entered all the code, but now when I activate the user form I get an error ....."Compile Error. Invalid attribute in Sub or Function." and when I click OK, it takes me to this line of code.....
Private WithEvents objForm As clsCtlColor
In the book, this is where I am supposed to start entering the code "behind the userform" rather than in the class module. So, I assume this means that this code goes with all the other code for the user form (in VBA project click on form, then view code). Am I wrong? Should I be adding a module? Not sure what I am doing wrong.
Here is the code I have in the class module....
Public Event GetFocus()
Public Event LostFocus(ByVal strCtrl As String)
Private strPreCtr As String
Public Sub CheckActiveCtrl(objForm As MSForms.UserForm).......
I am trying to delete a workbook, yes the whole workbook, if cell A1 is blank.
View 2 Replies View RelatedI am trying to find a easy way to delete multiple worksheets in a workbook and then saving the workbook based on the tab name of the worksheet.
View 9 Replies View Relatedis it possible to choose an option button which will then perform a calculation on a cell reference? I’m trying to deduct a percentage from a total when an option button is highlighted.
View 5 Replies View RelatedI'm having some trouble getting control ENTER & EXIT events to fire properly when having controls embedded on frames within a userform. I'm using Excel 2003, 2007, & 2010. Here's the userforms I'm working with:
With FRAME:
Without FRAME:
In both cases, the DESCRIPTION field is disabled. The selectable controls on both are a combo-box, textbox, listbox, & 2 buttons. On the FRAMED version, the combo-box & textbox are contained on a FRAME.
Here's the code, same on both userforms:
Code:
Option Explicit
Private Sub cmbRecipes_Enter()
ListBox1.AddItem "ENTER - " & cmbRecipes.Value
End Sub
Private Sub cmbRecipes_Exit(ByVal Cancel As MSForms.ReturnBoolean)
ListBox1.AddItem "EXIT - " & cmbRecipes.Value
End Sub
All this is doing is posting a message to the listbox when the combo-box ENTER & EXIT events fire. This works as expected without the FRAME, ENTER is shown when the combo-box is entered and EXIT is shown as focus is moved to another control. But when running it on the FRAMED version all I get is a single ENTER event recorded regardless of how I move the focus through the control set.
Another oddity is that if I have more than 1 control that can receive focus on the FRAMED version, it appears to work correctly.
Within the ComboBox properties, is there anyway to control after "enter" his hit, you move to the right instead of down (similar to the edit under Tools/Options)?
View 9 Replies View Relatedwhenever the active cell is within a given range, highlight the cell on the same row in column S (by changing its interior colour). This should occur each time the active cell is changed, whether by cursor keys or mouse. The effect would be similar to the row and column highlights at left and top of the worksheet.
This action should be restricted to one sheet in the workbook.
It's for Excel 2003.
I have got stuck on one piece of my code and having trouble fixing... Overall I am trying to find variable station name in cell L2 of Sheet 2 in Sheet 1 and then select and copy the data from the data in "cell L2 of Sheet 2" to the last entry of that row. I have attached an example test spreadsheet of the data and a macro is within Sheet 1 called test1. Please note that cell L2 in Sheet 2 will always be different station name and the station list in Sheet 1 will change with differing station name.
The code I am using is:
[Code] .....
The code that is not working and bringing up an error is:
[Code] .....
Attached File : Copy of Testexample.xlsm‎
I have created an excel worksheet that will provide budgeting and estimating tools for my project managers. All data used to be manual entry and took a good while to complete. I am trying to automate the process with VBA.
I created a UserForm called InfoVerify1. On that form I have TextBox 1 - 10. When the UF opens, the boxes display project information from my worksheet called "Basis of Estimate", also known as Sheet26.
The TextBox1 ControlSource is set to "E4". When I run the macro with Sheet26 active, the proper information fills in. However, when I am on the Start page or any other worksheet and I run the macro, it tries to fill in the text boxes with E4, etc, from the active sheet. I tried changing the ControlSource to "Sheet26,E4" or any combo thereof with only error messages.
how to get it to refer to a cell on a particular worksheet and hold to that worksheet no matter which sheet I am on at the time I run the Userform?
Is there any way in VBA to refer to a control in its own event procedure without referring to it by name/hard-coding?
It might be clearer to explain by a dummy code example:
[Code] ......
I'm seeking what I would need to replace Line1 with.
I have created a userform within VBA which has a TreeView Control and a Spreadsheet control on it.
I have populated the TreeView control with data and what I want to be able to do is to drag the nodes off the TreeView control to the spreadsheet control.
I can drag onto a normal worksheet but not onto the spreadsheet control (the no drop mouse pointer keeps showing).
I have a range of amounts in Sheet 1 from F7:Q13 and im using the find method to search for the active and non active values in the cell. Which means that if there's a value in the cell it will transfer the value in Sheet 2, if nothing is found in the cell the cells in Sheet 2 will return as nothing or null.
I think the problem lies on the FindWhat variable. Im getting a compiled error which im not sure what is it.
I've attached the spreadsheet so you get a better idea of the problem that i encountered.
I currently have the following macro running to set a chart's data values:
Sub C3Quarter12013()
'
' C3Quarter32013 Macro
'
'
ActiveSheet.ChartObjects("Chart 2").Activate
ActiveChart.PlotArea.Select
ActiveChart.SeriesCollection(1).Values = _
[Code] ......
When I copy the tab and change some of the data within the cells, I want the macro refer to the chart on the current tab and the values in the current tab - as currently it refers to only "Chart 2" and the values in the tab 'Figure 2 - WE OPH'.
I've tried changing the sheet name to ActiveSheet.name but that doesn't seem to work.
I have a HUGE dataset (more than 1 million rows). I'm trying to find the optimum cell range size - 10 rows, 100 rows, 682 rows, whatever - for a SUM formula. (The formula would be in every row, looking down at the next n rows).
Is it possible to control the SUM cell range specified in a formula in cell (X) with a value in cell (Y)? In other words, the SUM formula in cell (X) would somehow refer to cell (Y) to determine the SUM cell range.
Ideally, I would like to then use Solver to find the optimal value for cell (Y).
Is this possible with just formulas? Or is VBA required?
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code:
For Each c In Range("Q2:AC2").Cells
If c = period Then
c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
Before unloading a userform the range to select the active cell is set to
View 3 Replies View RelatedI have a sheet that I fill out with customer data then print and start over with the next customer. This requires me to tab and delete through the sheet before starting the next entry and I am wondering if there is some way to auto clear the unlocked cells based on a single entry IE when we entered new data in the 1st field this would clear the unlocked cells and make them ready for new data?
View 14 Replies View RelatedI have a formula in cel B1 : =SUM(A2:A100) / A1
I would like to use this formula many times in the sheet, so I would need a reference to the cell the formula is in, and have the SUM range until the next empty cell one column to the left.
So I would need something like (literally):
=SUM(Offset activecell (1,-1) : Offset activecell (1, (look for next empty cell -1)) / Offset activecell (0,-1)
I have a range of unlocked cells (B5:S10) that users enter data in. This sum of this data is then charted. The formula (sum) in a cell equals zero even when there is no data entered by the user. This zero is then charted.
I need to be able to plot the zeros if the user enters zeros but not plot the zero if the cells are blank.
What I was attempting to do is to use the worksheet change event to add the formulas to a cell so that the chart does not plot the value until something was added.
In my change event I need to know that a cell in the range (B5:S10) was changed and that if it was D7 (for example) that I need a formula enterd in D11 [=SUM(D5:D10)]. If it was I5 then the formula would have to go in I11 [=SUM(I5:I10)].
I'd like to ranage the range selection from D1 to A1:B53, but a number of attempts have failed. but can't get it working.
Code:
FileName = "R" + Scheme + Product + "_" + Format((Date + 1), "DDMMYY") + ".RP3.txt"
Sheets("RP3").Select
Range("D1").Select
WholeText = ActiveCell.Value
Call OutPutFile(WholeText, FileName)
Need to find the first cell above the active cell containing any sort of variable (integer, string value, cell fill colour, named range, etc...).
For example, a column contains multiple integer values between 1 and 10. I would like the macro to "locate" a specified value, say 3. Ideally the macro will select the first cell matching this criteria, located above the active cell. Once located, the resulting cell will be added to a range to be copy-pasted to a new worksheet.
I am planning to use this code for various applications in a workbook I am creating. At present the code will be used to locate string values, and cell fill colours. It is also likely this will extend to other types of variables in the future.
I've found information relating to the find function, but nothing specifically to find the first result above the active cell.
So, I just started checking Excel Macros. I'm working on a quite large data base where I need to search for a given part number and then move N columns to the right and display the text inside that cell on a message box.
Here's what I got 'til now:
Private Sub M0016216_Command_Button_Click()
Cells.Find(What:="M0016216", After:=ActiveCell, LookIn:=xlValues, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
ActiveCell.Select
[Code] ........
I am just learning to use VBA and this may be the most simple task ever, but I can't figure it out. I've searched for all of the keywords I can think of, but can't find a solution...
I have a list of names in a sheet. Other columns in this sheet contain data like amount charged, amount paid, etc. This sheet must be manually updated (because the other program won't export the information I need) periodically to ensure proper billing/payment application in the original software (all transactions are handled by other people that I don't trust).
I sort the list so that the all names that are the same (ie John Doe) are together.
A short example list looks like this:
Jeremy Apple
John Doe
John Doe
John Doe
Jimmy Kravitz
Jimmy Kravitz
In updating my sheet, I set up a macro that will input todays date in one of the columns for all occurences of that name (so, every row that contains John Doe in column B, column V will have todays date in it).
Currently, in order for my macro to work properly, I have to manually make the activecell the first occurrence of 'John Doe'. When I'm ready to update 'Jimmy Kravitz', I have to select the first occurrence of 'Jimmy Kravitz' and so on.
Here's my question - Is there a way to use a VBA macro to find the first occurrence of 'John Doe' (and automatically 'know' which name I am updating)? Basically, I need a macro that will take the information that is in the cell in column B in the active row, find the first row that has that same name, and make that cell (column B) the active cell...
I have an embedded chart on my worksheet.I can select a cell behind the chart using the keyboard arrow keys.Is there a way of doing this using a mouse click,so that I know which cell i am pointing to/choosing?
View 4 Replies View Related