So, I just started checking Excel Macros. I'm working on a quite large data base where I need to search for a given part number and then move N columns to the right and display the text inside that cell on a message box.
I have a drop down lets say in cell A1. Based on what value is selected in A1, the user should see a different set of check boxes. My thought, which may not be the best way to implement this, is to have all the check boxes and depending on the value selected in A1, the check boxes that are relevant should be active or visible, while the unneeded ones are inactive or invisible.
One of the worksheets contains all of the data and the rest are empty. I need to do is move entire rows of from the main worksheet in to worksheets named the same as the value in column C of the row.
for example one row may have TEST in column C so i want to move it to the worksheet called TEST. The next row might have TESTING in column C so that would go to the worksheet called TESTING. and so on.
I have attached the sample file where I have noted what I want as a comment. I need to check for the value " Function Name: RF Pick" if this is there then the code should move 2 rows down check whether that row has the value " Each" if its there just move one row down and move the cells as I need in the output.
The rows will differ depending on the Active Cell that's selected and I don't know how to specify this. The range I want to copy is from Column B to DA on the worksheet ("Staff") which I want to paste to another worksheet ("Leavers"). This is as far as I got
'FindRemove = lstRemove.Value 'If FindRemove = "" Then End
' Goes to the start of the Data column 'Sheets("Staff").Select 'Range("B4").Select
' Tests current cell against FindRemove 'Do 'If ActiveCell.Value = FindRemove Then 'Call CopyPerson 'Exit Sub 'Else: ActiveCell.Offset(1, 0).Select 'End If 'Loop Until ActiveCell.Value = "" 'End Sub
I have a workbook given to me by a coworker who password protected it. I generally use the tab button to navigate when adding information to cells with the number pad. I am unable to use tab when navigating his sheet until the protection is removed. How can I fix this so that I can tab through it when protected?
What is the command to move the active cell? For example, suppose C15 is the active cell, and I want a macro to move the active cell one to the right. Or maybe 3 to the right, and one down. The deal is, I'd like to be able to make the active cell move in a fixed pattern relative to the cell that is already active (before the macro is run), rather than moving to a final fixed destination (which would be something that even I could figure out). In other words, if I select R20, and run the macro (or whatever other mechanism you guys come up with), then R21 will be selected; likewise, I can click G12, run the macro, and G13 will be selected.
Need to find the first cell above the active cell containing any sort of variable (integer, string value, cell fill colour, named range, etc...).
For example, a column contains multiple integer values between 1 and 10. I would like the macro to "locate" a specified value, say 3. Ideally the macro will select the first cell matching this criteria, located above the active cell. Once located, the resulting cell will be added to a range to be copy-pasted to a new worksheet.
I am planning to use this code for various applications in a workbook I am creating. At present the code will be used to locate string values, and cell fill colours. It is also likely this will extend to other types of variables in the future.
I've found information relating to the find function, but nothing specifically to find the first result above the active cell.
I would like to create a macro that could archive entries from one sheet and insert them in another. I created one but the problem is that the entry has to be the same row each time.
Example:
Sheet 1 – is current jobs and sheet 2 is old jobs.
My macro moves an entry from Row A-5 of Sheet 1 and moves it to the top of Sheet 2.
I would like to be able to scroll through each entry select it and have it moved to the top of the Old Jobs sheet.
Excel 2003 > Attached is a small model of what I am trying to accomplish. Cells B2 and B4 contain the same formula … a formula that calls a simple function. The function has a variable passed to it … and the value of that variable changes depending on the location of the cell. Now, see the function in Module1 … it is called CellCalc. If the variable passed = Jim then value = 3. If the variable passed = Jack then value = 8. That is straightforward.
Note also that when Sheet1 is activated, I calculate the cells from left to right and top to bottom … that is important. Here is the challenge. If B2 > 1 then I want to add B2 to B4 and set B2 to 1. I can set B4 properly but I cannot reset B2. You can see my 2 attempts that are commented out. Is there some way of accomplishing this … or am I simply stuck in a circular reference?
The alternative to this is to write a function that operates externally on these cells. That will work for sure but then the values of the calculations will overwrite the functions in those cells, thereby taking away the dynamic nature of this application.
I have a sort procedure I have been working on. Sort By Active Cell Column Now I would like to make sure the row of the activecell.column is row 7. I tried
Private Sub comp_myMonthlyReport_SortAscend() Dim rng As Range With ActiveWindow rng = .ActiveCell(7, .ActiveCell.Column) End With Selection.Sort Key1:=rng, _ Order1:=xlAscending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom End Sub
But I receive this error: Run-time error '91': Object variable or With block variable not set
I RECORDED THIS MACRO BUT I WILL LIKE TO MAKE TO AUTO SELECT THE ACTIVE CELL RANGE IS VARIABLE ON MY REPORTS MY CODE
Sub FORMAT_AS_A_TABLE() ActiveSheet.ListObjects.Add(xlSrcRange, Range("$A$1:$L$1900"), , xlYes).Name = _ "Table1" Range("Table1[#All]").Select ActiveSheet.ListObjects("Table1").TableStyle = "TableStyleDark5" End Sub
whenever the active cell is within a given range, highlight the cell on the same row in column S (by changing its interior colour). This should occur each time the active cell is changed, whether by cursor keys or mouse. The effect would be similar to the row and column highlights at left and top of the worksheet.
This action should be restricted to one sheet in the workbook.
I have got stuck on one piece of my code and having trouble fixing... Overall I am trying to find variable station name in cell L2 of Sheet 2 in Sheet 1 and then select and copy the data from the data in "cell L2 of Sheet 2" to the last entry of that row. I have attached an example test spreadsheet of the data and a macro is within Sheet 1 called test1. Please note that cell L2 in Sheet 2 will always be different station name and the station list in Sheet 1 will change with differing station name.
The code I am using is:
[Code] .....
The code that is not working and bringing up an error is:
When I use the mouse pointer to select a cell I can't use the arrow keys to move to another cell while the pointer is over the cell and I can't edit the cell while the pointer is over the cell. If I move the pointer away from the cell then I can move around and edit as normal therefore I don't think this is a scroll lock issue.
This issue also happens when I select a tab. If I select a tab and then leave the pointer over the tab I selected then I can't use the arrow keys to move around the worksheet or edit a cell; if I move the pointer away from the cell then I can move around and edit as normal.
I have 2 columns and 10 rows (A1:B10). In column A are certain text values. How do I write a macro to go through the table and preform an operation in the corresponding cell in column B depending on the value in cell A? for example, if A3 = "Complete", overwrite the formula in B3 with the value (paste value)?
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1 B1 C1 D1 E1
Inspection Date Weeekly Due Bi-WeeklyDue Monthly Due 6 Monthly Due
January 1 2013 Change red Jan 8 & return blank Jan 10 Change red Jan 15 & return blank Jan 17 Change red Feb 1 & return blank Feb 3 Change red June 1 & return blank June 3
Is it possible to use a formula to shade a cell dependent on a condition? I have tried an if formula (see below) but it is incorrect. =if('November 2006 SVOC'!B6>'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [red],if('November 2006 SVOC'!B6<'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [blue],))
I'm trying to create a tag with a color border. What I desire is to fill the BLANK cells around the tag, A1:D1 + D1:D19 + A1:D19 + A1:19 in a certain color based on the text value of the cell B11. There are 5 different values, such that if the B11 read Red Sox - the boarder is going to be red, if it reads Houston Astros it will be dark blue, etc..
I have a similar problem with changing the color of the cell based on the month. So regardless of the year, 2014, 2015, 2016, etc... If I use MONTH() function I can just get numbers from 1-12. I want Cell C16-C18 to be certain color depending the date entered in cell C17 such that for each quarter, months 1-3, 4-6, 7-9, 10-12 they are different color.
I have had no luck with conditional formatting (and I also believe that it is good up to 3 cases only). I am decent in logic/programming language but have little knowledge with macro notation and especially how to run them in excel 2013. I do know how to start it alt+F11 and that I need to make sure that code is written under the specific sheet where my tag is located.
I have the names of companies in one column, and the amount they owe in cells in the column beside them. I then have a second list of companies that is a subset of the first. Is there a formula that would place the amount they owe in teh corresponding cell adjacent to the compny in the second list? I've attached a sample workbook, Full Company List in column A, amount owing in B, trimmed down list in D and ideally I'd like the corresponding values in E.
What I need to do is have a cell that will be say yellow until there is information put into this cell. The information could be in the format of text or numbers. The information would not always be the same so it would need to be yellow when there is no information in the cell and another colour or white when there is information in the cell.
I have a file consisting of two columns, called, "bom ref" and "material" I need to show the data as indicated in the file, headed required format required.
In effect where I have a 0, that is the material I need to show for every row with a bom ref. of 1,2 or 3, down as far as the next 0 but not including the 0, when I reach the next 0, the material is a new letter, and that letter needs to repeat down as far as the next 0, but not including the 0 and so on.
code which highlights a cell depending on the criteria of another cell.
Example.
In B1 I have the formula =NOW() (we all now what this means).
In B2 I have a completion date.
I would like A2 to fill with a specified colour.
Can this be done so that it works down the whole sheet, if the date is in B5 then only A5 will highlight so basically only the A cell on the same row will change depending on the date in B on the corresponding row?
how to make a cell a color depending on a number in a different cell? Example...if A2 is 92.6 how would I make D2 blue? But if A2 were 91.9 how would I make D2 red?
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code: For Each c In Range("Q2:AC2").Cells If c = period Then c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
If F3 contains specific word i.e. FCL then only cell K3 and L3 are unlocked or available for data input.
Additional information:
F3:F10002 contain data validation list
I need to apply above condition on K3:K10002 and L3:L10002
I did some search on this forum and I came to know above can only achieve through VBA only. Is there is any possible way without VBA? I'm not good with VBA etc
i'm trying to ask my spreadsheet to fill a cell with either 'YES' or 'NO' depending on the value of one cell. I've succeeded in getting it to enter 'YES' but can't figure out how to tell it to choose between the two options. This is the formula so far
