Identify Active Cell And Use The Column To Add Formula To Another Cell
I have a range of unlocked cells (B5:S10) that users enter data in. This sum of this data is then charted. The formula (sum) in a cell equals zero even when there is no data entered by the user. This zero is then charted.
I need to be able to plot the zeros if the user enters zeros but not plot the zero if the cells are blank.
What I was attempting to do is to use the worksheet change event to add the formulas to a cell so that the chart does not plot the value until something was added.
In my change event I need to know that a cell in the range (B5:S10) was changed and that if it was D7 (for example) that I need a formula enterd in D11 [=SUM(D5:D10)]. If it was I5 then the formula would have to go in I11 [=SUM(I5:I10)].
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Add Active Cell Data To Cell By Clicking
I want to automatically put information from several cells into one cell, when these cells are clicked. Let's say that A1:J8 is the range were a cell can be clicked and if a cell is clicked in that range the value of these cells should be put in cell A9. If possible I want to avoid private subs in a worksheet. I preffer to have a macro running, so I can decide when to stop this routine.
View Replies!
View Related
Automatically Add Formula To Next Cell In Column
I have a list of names in column 'A' and a lookup formula in column 'B'. Rather than drag and copy the formula to succeeding rows I would like to have the formula added to column 'B' when a value (name) is entered into column 'A'. The list in column 'A' is auto sorted by alphabet and the lookup reference in column 'B' need to stay with the value (name) in column 'A'. Mabe some conditional format/formula that says if their is a value in cell A2 to copy the formula in A2 into A3 and so on down the list.
View Replies!
View Related
Formula To Add Column A If Column B = Cell C1?
a b c d 1 .2 yes yes .3 2 .5 no no .5 3 .1 yes maybe 0 So, as in the above example, I need to put a formula in D1 so that it will take the sum of column a if column b = c1. I hope this makes sense. And keep in mind I will be continually adding rows to this and will need it to cover the entire row, not just part of a row.
View Replies!
View Related
Sort By Active Cell Column
I am trying to perform a sort based on the ActiveCell.Column I thought my code would exclude the hearer rows, but presently it moves the header rows beneath the data I tried Header:=xlGuess as well as Header:=xlNo Same result What am I doing wrong? Thanks -marc Private Sub comp_mySort() Selection.Sort Key1:= Cells(1, ActiveCell.Column), _ Order1:=xlAscending, Header:=xlNo, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom End Sub
View Replies!
View Related
Find Name Of Column Active Cell Is In
I have a code which looks at sheet2, useing a date value, and returns the Vent value and the Tanker value to sheet1. Because of the file size I have pasted a small section of Sheet2 in the hopes you can see what I am doing. As can be seen my code is not going to work with Offset as soon as the Data fills further down the sheet(every 2 weeks). I need a way to reference the active cells column name (it is a named range) or header name. Both are the same. That is the header name is the same as the name of the range. there is a way to perhaps find the first cell of the column,which I guess would work,but have reached a stale mate with what I've tried so far. Vent 01Vent 02Vent 03Vent 04 Date3/06/063/06/06n1/06/06 Tanker8248824617606 WhoJ AshJ AshEmptyHarry Date Tanker Who Private Sub DueCommandButton_Click() Dim strRecordID As Range Dim rngData As Range Dim Vents2 As Range, Tanker_Result As Range Dim wsheet1 As Worksheet, wsheet2 As Worksheet Dim Column_Name As Range Dim ActiveCell As Range Set wsheet1 = Worksheets("Sheet1") Set wsheet2 = Worksheets("Sheet2")....................
View Replies!
View Related
Change Active Cell Value In Hidden Column
The attached sample workbook has a listbox of areas in a userform. The Textbox on the user form is so that the user can edit the Area names in the listbox. The userform functions fine as long as the column that contains the area name is not hidden. What I want to be able to do is edit the Area Names using the Textbox with the area name column hidden.
View Replies!
View Related
Active Cell Referred By A Formula
I have a "Match" formula in a cell that gives me the Row number of the Cell matching the criteria (lets say row 502) and the Column is always B. With VBA I want to make my ActiveCell the cell (B502) referred by the "MATCH" Formula.
View Replies!
View Related
Extend Selection From Active Cell To Desired Column
1st post so hope that title isn't too vague. Using VBA, I have a macro that will find a column based on a week number and add in a new column. It will then offset the ActiveCell down one. I now need the macro to SUM all values in that row to the left of the ActiveCell. My original thought was to use: ActiveCell.Offset(1, 0).Range("A1").Select Range(Selection, Selection.End(xlToLeft)).Select Unfortunately, there are gaps in the data field, blank cells that should count as zero value. How can I highlight all cells to the left, from whichever column the active cell is in, through to column B?
View Replies!
View Related
Formula That Returns Address Of The Active Cell
Is there a formula in Excel that returns the active cell address (ie dynamically). Excel updates the activecell address in the Name Box dynamically as you make a selection but I cannot find a standard formula to access it. I know I can achieve this with code using the selection-change event but this action then disallows use of the Undo button - which I specifically want to avoid. Perhaps there is an add-in available?
View Replies!
View Related
Set Variable To Row & Active Cell Column
I have a sort procedure I have been working on. Sort By Active Cell Column Now I would like to make sure the row of the activecell.column is row 7. I tried Private Sub comp_myMonthlyReport_SortAscend() Dim rng As Range With ActiveWindow rng = .ActiveCell(7, .ActiveCell.Column) End With Selection.Sort Key1:=rng, _ Order1:=xlAscending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom End Sub But I receive this error: Run-time error '91': Object variable or With block variable not set
View Replies!
View Related
Pick Data From A Specific Row/column (eg 10/B) Related To Active Cell
I have a spreadsheet with my Periods along row 10. e.g. C10: "1", D10: "2", E10 "3", F10: "4", G10: "5" etc. (green on the attached sheet). I have my departments along column B, e.g. B11: "Baked" B12: "Fresh" B13: "Frozen" (yellow on the attached sheet) what I need and cannot work out is some VBA code that will populate two variables (lets call them Period & Department) when I click on one of the figures. For example if I click on cell: if I click E14: Period would have the contents of cell E10, and Department the contents of cell B14. if i click G14: Period would have the contents of G10, and Department the contents of cell B14 again. I know how to get the click on the cell to work properly etc, and I have code to slot these variables into that works very nicely, I just can't get this bit to work!!!!
View Replies!
View Related
Identify Rows Where A Given Cell Is Equal To The Contents Of The Cell Below
I need to identify rows where the contents of a given cell are equivalent to the cell below. I have managed to get this working based on iterating through the cells and selecting them both for cutting. However it doesn't work effectively: It seems to be leaving blank lines in the original sheet and further fails after the first execution. I would be grateful for any suggestions on a good method to perform the following operations: (1)to compare the cell with the cell below I have used If cell = cell.Offset(1, 0) Then (2)to act on the rows for the two connected rows Sub Test4() ' Loop through rows Dim TheExtract As String Dim cell As Range 'Application. ScreenUpdating = False For Each cell In Worksheets("Sheet 1"). _ Range("A1", Worksheets("Sheet 1").Range("A65536").End(xlUp)) TheExtract = cell If cell = cell.Offset(1, 0) Then cell.Rows("1:2").EntireRow.Select Selection.Cut Sheets("Test").Select ActiveCell.Offset(3, 0).Rows("1:1").EntireRow.Select Selection.Insert Shift:=xlDown End If Next cell 'Application.ScreenUpdating = True End Sub
View Replies!
View Related
Add Cell Of Different Sheets To Column
the code is to make each cell in a column in a sheet = to definite cell for all other sheets like sheet1,cell(A1)=sheet2cell(b2) sheet1,cell(A2)=sheet3cell(b2) sheet1,cell(A3)=sheet4cell(b2) sheet1,cell(A4)=sheet5cell(b2) and so on so we r going down with cells in sheet1,and we r making them = to a definite cell in all other sheets anyway here is the code if u will creat a column with values sheet1 sheet2 sheet3 and so on then Private Sub lolla() i = 0 Do Until i = 5000 i = i + 1 Sheets.Add After:=Sheets(Sheets.Count) Sheets("sheet1").Select Range(Cells(i + 1, 1), Cells(i + 1, 1)) = "=" & Range(Cells(i + 1, 3), Cells(i + 1, 3)) & "!b2" Loop End Sub
View Replies!
View Related
Add Comma To Each Cell In Column
I am an Excel Novice. I don't know very much at all about how it works, what formulas are or any of its intracacies. My job requires me to take information from an Excel file that is emailed to me. I need to know in the simplest terms how to take the first column (which is last names) and add a comma to the end of each name (one in each cell) all the way down that column, before I copy and paste them, so they will read "last name comma space first name".
View Replies!
View Related
Highlighting Active Cell's Row, Along With Any Row That Shares Same Value In That Column
Is it possible to click on a cell in column C, and have the wishlist below happen: That active cell's row is hightlighted. Any cell in that column that has the same value as active cell is also highlighted. Plus, any cell in another sheet that has that value it's row is highlighted too. Example: I click on C5 in Sheet 2 its value is 45000789 it row is highlighted, this value also appears in C3 in the same sheet, so it's row is highlighted as well. Plus, in sheet 1 in C10 this value appears and it's row is highlighted as well. When any of the values are clicked again the highlight is removed from all parties.
View Replies!
View Related
Add Clicked Cell Value To Formula
The idea is that once macro is started it will add the value of any clicked cell into the formula of the original cell. ie. 1.start macro 2.click cell a5 (value=36) 3.type '+' 4.click cell b7 (value=21) 5.click enter to end macro Result will be '=36+21' in the formula bar. The cell will then show the answer 57.
View Replies!
View Related
Code To Add Formula To Cell
I tried putting a formula into the below code but without any success. mylogoff. Offset(0, 3).FormulaR1C1 = "=IF(WEEKDAY(RC[-1]=""6"",""17:30:00""+0,""18:00:00""+0) It says application defined or object defined error.
View Replies!
View Related
Find Blank Cell In Column To Add Data
I need to write entries into an open spreadsheet with data input on a userform. i need to use the xlup facility to find the last used row in the spreadsheet, select the next line and then enter the data, but how to return to VBA the actual cell reference that has been selected after doing the xlup and down one row. I need to be able a total potential 31 rows of data from the userform.
View Replies!
View Related
Add Single Character Before & After Each Cell Value In Column
I am trying to do is put an asterisk at the beginning and the end of the Information in a cell for the entire column. Is there a way to make a macro that, once I highlight a column, it will put an asterisk at the beginning and end of the information in each cell in that column until a blank cell is reached where the macro will then stop? This will save me a lot of work. It will work for me if a particular column has to be defined in the macro, but would be better if it is one I can just highlight. This would also work fine for me if I just had to highlight the cells that I want to use as well. Sorry if this seems to be a stupid question, but I am a very novice excel user
View Replies!
View Related
Paste Formula To Specific Row In Active Column
I'm trying create a macro to enter a series of forumula's in a series of rows in whatever column is currently selected (or column which has a cell selected). IE if the active cell is C5 I want "=A1+B1" copied to C10 of it was AA43 selected I'd want "=A1+B1" copied to AA10. Have done this with setting a row as a variable, but whenever I've defined the column as one it comes out as a numeric value. and gives me "method range of object global failed"
View Replies!
View Related
Create Formula To Add 0.2 To Cell Value If Its Greater Then 0
I want to create a formula which will add 0.20 to the value of a cell if its greater then 0. Basically i have a list of cells some of which will have a value and i want to sum this list and add 0.20 if there is a number in the cell. I am trying to create a quoting system and basically its a list of rooms etc with the wall lengths and i am adding 0.20 to each wall to allow for excess but for example if there are no measurements in bedroom5 i dont want the 0.20 added.
View Replies!
View Related
Add Nested Formula To Cell On Another Worksheet
One of my macros is a tied to a worksheet_change. The macro runs and gives me the result that i want, however excel flips to the sheet that the sub is running for. example: Sheet1, Change the cell excel flips the visible to sheet2 macro runs Its kinda of annoying. I would like excel to stay on sheet1 where i am trying to finish data entry. I suspect it is how i have writen the macro. Any help at all on how to clean it up.. or a better way to write the same thing would be very appreciated. Sub TermPlacement() ' Term_Placement Macro ' Uses the Value of Term to insert a formula repeatedly in a colum. Dim sNFormula As String Dim rTerm As Range Dim rStart_Cell As Range Dim rNpayment As Range 'The reference cell located directly above the first cell in column Set rStart_Cell = Worksheets("Floor Plan").Range("$B$13") 'Additional set values....................
View Replies!
View Related
Find Empty Cell And Add Formula
I have a spreadsheet that is pulled automatically from an access database. The information that is pulled is invoices that have been paid for each of the temps working for our company. Each month I have to give a figure per cost code on how much they are accruing so that they can see how much is still outstanding. Right so what I am trying to do is have a macro take the temps charge rate then * 40 hours and place the amount into the empty cell. As you will see in the attachement some of the cells are coloured. The purpose of the colouring is show that a invoice has been processed and paid for that week so no value is needed in that cell. Then total all the cells at the end.
View Replies!
View Related
Automatically Add Cell Formula With Code
Cell b2 contains the formula =IF( COUNTIF(B$1:B2,B2)=1,MAX(A$1:A1)+1,"") I want cell b3 to contain the formula =IF(COUNTIF(B$1:B3,B3)=1,MAX(A$1:A2)+1,"") I can do this within the spreadsheet by simply highlight and drag down to autofill and excel updates the formula references as I need However - because the sheet gets very large (its a sort of rough database) I dont fill in all the formulae on a blank sheet, but each time a record is entered using a VBA form I have the following working code copy the formula ActiveCell.Offset(nextline, 0).Copy ActiveCell.Offset(nextline + 1, 0).Select ActiveSheet.Paste However I dont want to use 'Active' - because I have to work out what cell is selected before this is executed and then reselect it after, which also causes the screen to flash when the active sheet changes so I tried the following which does not work Worksheets(" Analysis").Range("A2").Offset(nextline, 0).Copy Worksheets("Analysis").Range("A2").Offset(nextline + 1, 0).Paste because 'object does not support this property or method' on the Paste. I can save the code in a string and modify the string to generate the new code, but I cant find a way to assign the new formula to the next cell.
View Replies!
View Related
Add Formula To Last Cell In Range Via Macro
I currently have the following code to copy and transpose data from one worksheet to another: Range("E3:E6,E10:E53").Select Selection.Copy Sheet3.Range("A65536").End(xlUp).Offset(1, 0).PasteSpecial Paste:=xlPasteValues, Transpose:=True What I would like to do is add to this code. I would like to add the following formula to the cell at the end of that pasted row. =VLOOKUP(Range,LeaveIndicator,6,FALSE). In this case the Range needs to be Row D and the last row of sheet3.
View Replies!
View Related
Add Subtraction Formula To Cell Via Code
If I wish to amend the below code such that it must use the cell one row above minus the cell on the left, how should I go about it? Eg, If in cell C10, the formula is to use C9 minus B10. If in cell C11, the formula is to use C10 minus B11. mylogoff.Offset(0, 1).FormulaR1C1 = "=RC[-1]-RC[-2]
View Replies!
View Related
Add Cell Number To End Of Corresponding Formula
I have a monthly report on an excel spreadsheet that I must sum two columns from the previous month for every row in the sheet. I wish to take the value from column B and add to the end of the formula in column A. For instance my column A would contain the following: "=1200+6595+2599+275" Column B would be a single number, i.e. "3200" I want to be able to click a button and get "=1200+6595+2599+275+3200" in column A and place a "0" in column B for every row on the sheet. I have a pretty good understanding of VBA, but I am still learning the Excel object model.
View Replies!
View Related
Add Relative Row Formula To Cell
I'm importing comma delimited files into Excel. These files will contain formulas, but do not know on which row they will end up in once imported. My formula's need to reference the row they have been pasted to. For example, If I paste the formula on Row 2 the formula would be =A2+B2 Row 3 =A3+B3 However, since these formulas are coming in via a non-excel file, I need the cell reference to be dynamic. Something along the lines of =A#+B# where # would be interpreted by Excel as the current row the formula is on. (I know that '#' isn't correct.)
View Replies!
View Related
Return Maximum Of Active Cell & Arbitrary Value To Cell
I am looking for VBA that will add the value of the current active cell on the sheet to the value in cell F12. The maximum value of F12 cannot exceed 1000. So if the value in F12 = 950 and 100 is the value in the active cell the maximum value in F12 should show 1000, not 1050. It should do this on the click of a button.
View Replies!
View Related
Insert Row At Active Cell With Formula From Fixed Row
I want to insert a new row that contains the formulas of a fixed row (1:1). The inserted row is changeable and is determined by whichever is the current active cell. Eg: Active cell is something random like E16 I want to add a new row but don't want a blank row - rather want a row that contains the properties of 1:1
View Replies!
View Related
Go To First Cell In List That Matches Contents Of Active Cell
I am just learning to use VBA and this may be the most simple task ever, but I can't figure it out. I've searched for all of the keywords I can think of, but can't find a solution... I have a list of names in a sheet. Other columns in this sheet contain data like amount charged, amount paid, etc. This sheet must be manually updated (because the other program won't export the information I need) periodically to ensure proper billing/payment application in the original software (all transactions are handled by other people that I don't trust). I sort the list so that the all names that are the same (ie John Doe) are together. A short example list looks like this: Jeremy Apple John Doe John Doe John Doe Jimmy Kravitz Jimmy Kravitz In updating my sheet, I set up a macro that will input todays date in one of the columns for all occurences of that name (so, every row that contains John Doe in column B, column V will have todays date in it). Currently, in order for my macro to work properly, I have to manually make the activecell the first occurrence of 'John Doe'. When I'm ready to update 'Jimmy Kravitz', I have to select the first occurrence of 'Jimmy Kravitz' and so on. Here's my question - Is there a way to use a VBA macro to find the first occurrence of 'John Doe' (and automatically 'know' which name I am updating)? Basically, I need a macro that will take the information that is in the cell in column B in the active row, find the first row that has that same name, and make that cell (column B) the active cell...
View Replies!
View Related
IF The Value In R493 = 1 THEN Add 1095 To The Formula In Cell AA493
I have a date in cell F493 (DD/MM/YY) I have the following formula in Cell AA493 =F493-21 What I need to do is look at Cell R493 IF the value in R493 = 1 THEN add 1095 to the formula in Cell AA493 . IF the value in R493 = 2 THEN add 730 to the formula in Cell AA493. IF the value in R493 = 3 THEN add 365 to the formula in Cell AA493. IF the value in R493 = 4 THEN PRINT "No Extended Guarantee"
View Replies!
View Related
Add Todays Date When Cell Value=Y (but Not Using TODAY Formula)
I’ve been searching the forum but am struggling to find exactly the information I need! I’m trying to get a column of cells to update with the date that the cells contents change to “Y”. I had been using the formula =IF(I7="Y",TODAY(),"-") in cell J7 but this updates the date every day. I need this date to remain the same as when it’s first populated. I’ve been trying to cut and paste text from existing posts into the Visual Basic code but am new to this so am not getting the results I need. I had tried: Private Sub Worksheet_Change(ByVal Target As Excel.Range) 'will put date in column B when something is put in A If Target.Column = 9 Then Target.Offset(0, 1).Value = Date End If End Sub But this caused all sorts of problems! I then tried messing around with: Option Compare Text Private Sub Worksheet_Change(ByVal Target As Excel.Range) On Error GoTo enditall Application.EnableEvents = False If Target.Column = "I" Then If Target.Value = "Y" Then Excel.Range("J").Value = Date End If End If enditall: Application.EnableEvents = True End Sub But this doesn’t work either. In fact, both these codes are probably riddled with errors as I’ve been trying to learn by trial and error!
View Replies!
View Related
Add Formula To Cell & Fill Down Macro
I have written a macro that creates a new spreadsheet and copies text into it. The number of rows varies depending on the input. Yet, running the macro results in a sheet with the max rows (65k+). This is unmangeable, as it makes it a huge file and size and harder to print. I only want there to be the number of rows that have text in them. The larger problem is how these were even created in the first place. Currently: ' Formula for Job Name Range("A2").Select ActiveCell.FormulaR1C1 = "=LEFT(RC[12],8)" ' Fill Job Name Range("A2").Select Selection.AutoFill Destination:=Range("A2", Cells(Rows.Count, "A")), Type:=xlFillDefault
View Replies!
View Related
Macro To Add Nested Formula To Cell With Variables
I want the range in the VLOOKUP below to display its actual value - ie "'6 June 08'!$A:$C" in the formula rather than the actual variable name 'strResult'. Sub PreviousCount() strDate = "6 June 08" strColumnRange = "$A:$C" strResult = "='" & strDate & "'!" & strColumnRange Dim i As Long i = Range("A2"). CurrentRegion.Rows.Count Range("D2:D" & i).FormulaR1C1 = "=IF(RC[-3]="""", ""Column A blank!"", IF(ISNA(VLOOKUP(RC[-3],strResult,3,0)), ""NEW INSTALL"", VLOOKUP(RC[-3],strResult,3,0)))" End Sub
View Replies!
View Related
|
TRACKER
