I want to add a user-form on a chart, which will have check-boxes that will allow me to select series(lines) that I want see and compare in a chart. Currently my line chart has 24 series (Lines) which makes the chart very difficult to view and looks very busy. How do I add list of check-boxes that will allow me to select one or multiple lines that I want to see at a time?
View 2 RepliesI have the following code:
Sub Macro5()
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveChart.SeriesCollection(1).Delete
ActiveChart.SeriesCollection(2).Delete
End Sub
However, if there is no SereisCollection(1) actually present in the chart I get an error. How can I work around this? I will need an IF statement I assume, just not sure what it will look like.
Is there any possible to add a series to a graph table without having the line in the Graph. i just want to show the difference for information and not in the graph?
i have tried some different things (like having the difference in white so it is not visible, formatting the Axis etc)
See attached picture. Excel 2.JPG
I need to create a line graph that has 2 lines for each person, one with the amount, one with the points. The X-Axis is by Weeks going up. How can I do this without making a separate series for each? I've attached an example.
example.xlsx
I have been trying to chart temperature differences over 10 day's time for six cities using a line graph. For some reason, the lines are all clustered at the bottom of my graph, with values of 0. My spreadsheet is accurate, without any blank cells. I'm using Excel 2010.
View 1 Replies View RelatedThe following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
I have a scatter graph that has over 100 curves that im need on one graph that at the moment i putting each x and y and name in by hand in series. I have been doing it for hours and have looked round the site to see if anything similar answer on ozgrid would help but im baffled
i was just wondering if there is an easier way of doing this
i havent really used macros but iv been reading up on it can i used it to do this?
I have added the table and graph and this is how i would like all the columns to look like
its the table called graph that makes the curves that i would like to be able to add in quickly
the rest im not too fussed about.
I am trying to recreate the screen grab that I have copied and pasted in (purple bar chart). I am to create the bar chart, but I am unsure how to create the dotted line which is the national average.
View 3 Replies View Relatedhow can i plot multiple series of values in one graph after checking some check boxes, which i have previously done, randomly?
View 4 Replies View RelatedLooking for code that returns the cell address of a series in a pre-existing graph. I have a graph that already has Source Data manually assigned to it. Is there a way to find just the cell values or location of a single Series in a SeriesCollection object? I know that in order to assign a series of data to a Series object, you do something like this:
ActiveChart.SeriesCollection(1).Values = Worksheets("My Worksheet").Range("A1:F1")
The issue I am tackling with is a graph that already has preexisting data in the Series object, and I just need a quick and easy way to find the address of this data set.
i have created a xlColumnStacked chart using VBA in excel 2000. i would like to place a line in the center of one of the Points(). How can i locate a specific point, for example Points(1), so what i can then "draw" a line in the center
View 7 Replies View RelatedI've been trying to work out a code for a while now to plot some series in rows on a graph. The wonderful Mr Pope helped me with one before but for series in columns but i just don't seem to understand it enough to use it for this problem. the graph already has 2 series plotted (called the envelope) so i have to use seperate series to plot the data.
Basically the name of series is down column A
but the range is from E1 to Y1
and the data to be plotted on the graph which already has two series plotted in it is E2 to Y2, E3 to Y3 etc. iv been trying to use this code but failing miserably
Sub adddatatopsd(Name As Range, XData As Range, YData As Range)
With ActiveSheet.ChartObjects(1).Chart
With .SeriesCollection.NewSeries
.ChartType = xlColumnClustered
.XValues = XData
.Values = YData
.Name = Name
.ChartType = xlXYScatterSmooth
End With
End With
End Sub...........................
I have created some charts for my work and one of them is a line chart that spreads across one year with values for each month. Well they want the graph to always show one month ahead of where we are out. So there is actuals in for Sep. but then the line graph drops all the way to 0 for Oct. I don't want to have the graph bottom out when there is a zero. Does anyone know how to fix this?
View 9 Replies View RelatedSee the code below. It works fine but in the report that gets printed off, it doesn't display grid lines and line numbers .
[Code] .........
I have data:
Jan Feb Mar Apr May
2009years 56 45 42 50 62 - series1
2010years 48 47 45 48 55 - series2
I need make line chart from 3 series. First two are series1 and series2. Third is percent change between 2010 and 2009 years every month (series3). First two are easy, but third is very difficult for me, becouse I haven't row with percent change and I can't haven't it in my exercise.
How can I make it without new row with percent change?
I tried it with Data Source in chart, also formula in Name Manager, but it doesn't succeed
I have created a population pyramid and want to add another chart on the secondary axis which I can do. The part which I seem not to be able to complete is getting the line chart secondary axis to read from the primary y axis. It seems to add a new axis, even when I delete this the line chart does not read correctly.
View 1 Replies View Relatedcreating a graph / chart using Ms Excel? I've been trying to do it myself but to no luck as I'm just a novice Ms Excel user. I'm trying to create a bar graph and combine with line graph based on these data. kindly refers to my attachment image for an example of desire graph. For line graph, it should display individually based on the given data. These are my daily data and I want to have an analysis graph so that I could monitor my computer's usage and its efficiency.
Computers Data Usage
--------------------------
Computer01 10 50.00%
Computer02 691 68.89%
Computer03 107 81.03%
Computer04 190 81.25%
Computer05 2099 82.89%
Computer06 1247 50.88%
Computer07 2786 10.00%
Computer08 69 22.00%
Computer09 300 18.00%
Computer10 1829 87.07%
Computer11 746 27.43%
Computer12 437 91.33%
Computer13 301 62.50%
Computer14 24 40.00%
Computer15 93 83.33%
Computer16 192 92.45%
I am trying to produce a line chart, which will use imported data on a separate sheet (but within the same workbook)
The imported data can be of different sizes ie column widths and length. Some columns may contain only zero and should not be included in the chart, and will be to right of the data.
I have created a named range for the data series called ChartData using =OFFSET(Data!$C$1,0,0,info!$C$7,info!$A$2) - C7 and A2 are calculations to set column and row sizes. I have tried to use this as the chart's data series, but without success.
I have a line Chart and want to create a static horizontal/indicator line.
I cannot create a new series to plot this horizontal line as I'm using an external data source (OLAP cube) as source data for the chart.
creating breaks in the line this script now simply turns the line black.
View 9 Replies View RelatedIm plotting data on a Line-Column 2 Axes Chart which works really well with 4 data series (2 column, 2 Line) but when adding a fifth data series, the fourth disappears from view. I can see its still there cos I can display the values but I cant get the line to appear. The values for the 5th series are also similar to other series values so its not like the chart cant display it....are there limits to the number of series on such a chart?
View 9 Replies View RelatedI am creating a line chart with markers using 5 series of data. I want to colour in/shade the area under the lowest series.
View 6 Replies View RelatedIs there a way to add comment text at a 45 degree angle to an excel chat?
What I need to do is to add a comment parallel to a 45 degree line on an excel chart, and the text box dosen't give you the option t have 45 degree text.
I have the following code which puts a series onto a chart
With Charts("Test Chart")
.SetSourceData Source:=Sheets("Data").Range("A1:B" & Nreadings), PlotBy:=xlColumns
.Axes(xlCategory).MinimumScale = 1
.Axes(xlCategory).MaximumScale = Nteeth
.Axes(xlValue).MinimumScale = Miny
.Axes(xlValue).MaximumScale = Maxy
End With
I would like to add a 2nd or third series onto the same chart using the same scale etc. How do I do this in VBA code? Whenever I add another line to add a series it just overwrites the first series I have shown here.
I want to use 4 toggle buttons to be able to add and remove 4 different series to a chart. When the toggle button is clicked, a specific series is added to a chart, and when it is unclicked then the series would be removed.
The problem I am running into is that unless I add and remove each series in a specific order, I will get an error because I may be trying to remove a series whose series number is not on the series collection in the chart.
for example: if I remove series number 2 with the toggle button for that specific series, then the toggle button for series number 3 will remove the old series 4 (which is now 3), and the toggle button for series 4 won't work because series 4 will now have become series 3.
Therefore, would there be a way to remove a series based on the name of the series, rather than the series collection number?
I have a worksheet where I am collecting data and a seperat Chart. The first part of this code which adds a new row in my table works perfectly fine, but the latter part (based on a macro recording) does not. I need to specify the relevant row for the new series in the bubble chart. The colums are of course the same.
Private Sub CommandButton1_Click()
Dim LastRow, LastRef As Long
'Works!
ThisWorkbook.Worksheets("Projektradar - input").Select
Range("Q3").Activate
LastRef = ActiveCell.Value
Range("Q3").Value = LastRef + 1
I am trying to graph the following data in an area chart with line charts superimposed on the area chart. I have a lot of data (and a lot going on) so I'm trying to figure out the best way to show this in excel from a functional standpoing (i can't get this to work in excel!!) to also an asthetic standpoint (dont want it to look terrible or illegible). This is what I'm trying to chart:
1) Weather data (temperature) by region:
So one region, would be: Northwest
I would like the "area" (so a shaded region) to be the min/max of the temperature data for each month.
2) I would like to show the temperature for each year as a line graph on the chart - so you can see if a year falls in or out of the shaded region.
3) I would like to show a company's sales increases across the same months per year as separate line charts. I may choose to just show the biggest outlier year in the end... or to show 2006 (the latest data).
What I am trying to convery with the chart is that the company's sales is or is not tied to weather deviations. I have attached an excel file with the data. I haven't been able to use the area chart or get a two axis chart to work or get it to look even remotely professional.
how to get a line in a graph to become a curved line between 2 data points in 10 point chart. I the pictuer attached I am trying to get the line to curve at the second data point 5(ms) and the third data point at 80(ms). The aftr 80 the line become staright again.[IMG][/IMG]
View 3 Replies View RelatedI am trying to create a line graph that will incorporate multiple columns of data in one series of data. The reason I do not place all of the data in one column is because it could exceed the maximum amount of rows allowed in excel. Also I need the data split up for viewing purposes.
I can easily just graph one column but how do I combine all the columns into one line graph with the data being in separate columns. Basically all the columns will be my Y values and X values are just 1:n.
Example Below:
Column AColumn B Column C159261037114812
Now in the example all of the values are x values.
I have a chart with sales data on one axis and inventory on a secondary axis. I have the average of each columns of data and want to add a reference line to each axis with it's average. I have added the averages to my data set, but it only adds the reference line to my primary axis. I actually began by manually inserting two lines to the chart (which seems asinine). They actually didn't print because they weren't actually on the chart, but rather just on the spreadsheet behind.
View 5 Replies View Related