Error File Cannot Be Found When Print The Sheet
Feb 9, 2010With this macro i print nine sheets. If there is one missing, excel gives a warning that the document cannot be found. I want excel to go ahead with the following document.
View 4 Replies
ADVERTISEMENT
File Not Found Error 563
Dec 17, 2009The error that pops up has no information other than "File not found" in a dialog box with two buttons.
File not found (Error 53)
The file was not found where specified. This error has the following causes and solutions:
A statement, for example, Kill, Name, or Open, refers to a file that doesn't exist.
Check the spelling of the file name and the path specification.
An attempt has been made to call a procedure in a dynamic-link library (DLL) or Macintosh code resource, but the library or resource file name specified in the Lib clause of the Declare statement can't be found.
Check the spelling of the file name and the path specification.
In the development environment, this error occurs if you attempt to open a project or load a text file that doesn't exist.
Check the spelling of the project name or file name and the path specification.
For additional information, select the item in question and press F1 (in Windows) or HELP (on the Macintosh).
File Not Found Error In Add-in
Nov 6, 2006I am trying to open an Add-In file (that I wrote) and I am now getting the following error "File Not Found". I am sure it has to do with a typo in the code or something.
However, I cannot get anything to open up so that I can see the VBA code. The spreadsheet itself does not contain any data, just the VBA project.
how I can get at the code to fix it?
I tried to upload the file, but it is too big for the requirements.
Error “File Not Found: VBA6.DLL”?
Dec 18, 2008Anyone ever seen this error “File not found: VBA6.DLL” ?
This error happens when I press a button I’ve created in the sheet. Funny thing is that there are other buttons right beside this button and they all work just fine. I’ve checked the code and names of all the macros in the sheet.
I’ve recreated a different module and renamed the macro and attached the code to another button.
Runtime Error 53 - File Not Found (XML)
Dec 4, 2012I am getting a "Runtime Error 53 - File not Found" with the below code. I am trying to move xml files from one folder to another. The file exists as my other macro can access the xml files and extract the info. But I can't get the macro to move them! Removing the last slash in the folder address hasn't worked either.
HTML Code:
Public Sub move()
Dim MyFolder As String
Dim NewFolder As String
Dim MyFile As String
[Code] .............
Runtime Error '53' File Not Found
Jan 23, 2007I wrote a program in Excel that calls a form to load when an action happens on a spreadsheet page, the code I used to call the form from is
sqe_portal.UserForm_Initialize
however since upgrading to MSoffice 2003 i get the runtime error '53' file not found. the files still their...? any ideas?
Run-time Error '1004':File Not Found :: Folder On Network
Dec 9, 2009The script below scans through a specified folder on a network and scans every xls file inside that folder for a value. When it finds the spreadsheet which contains that value (a policy number) it outputs some of the data from the matching file and also provides a link to the sheet in question.
It worked perfectly until I saved, exited and re-opened the file and now I am getting a 1004 run-time error every time I try and execute the script.
I cant for the life of me work out a cause.
More baffling, the wording of the error says that the file 'R:DirCancellations.xls' could not be found.
At no point is a file called 'Cancellations.xls' specified. Why has the script decided to search for a file called 'Cancellations'?
Sub Search()
ActiveSheet.unprotect
ActiveWorkbook.unprotect
Dim wb As Workbook
Dim TheFile As String
Dim MyPath As String
Dim DirLoc As String
Dim PolNum As String
ActiveSheet.Range("C13:G25").ClearContents................
Macro Error - First Sheet In Each File To Master File
Mar 7, 2012I am receiving an error at
Set CopyRng = Wkb.worksheet1.Range(Cells(RowofCopyworksheet, 1),
Cells(Cells(Rows.Count, 1).End(xlUp).Row, Cells(1, Columns.Count).End(xlToLeft).Column))
I am trying to copy the first sheet in each file in the designated folder and paste it into a master worksheet.
Below is the code.
'Description: Combines all files in a specific folder to Format File for Upload.xls
Sub MergeMultipleFiles()
Dim path As String, ThisWB As String, lngFilecounter As Long
Dim wbDest As Workbook, shtDest As Worksheet, ws As Worksheet
Dim filename As String, Wkb As Workbook
Dim CopyRng As Range, Dest As Range
Dim RowofCopySheet As Integer
[Code] ....
Looped Error Check Not Working: Error 1004 Is Generated When A Match Cannot Be Found In The Spreadsheet
Jul 2, 2006the if stattement works perfectly and does exactly what i want except when it comes to the else part. if there is no error the statements are run perfectly but if there is an error (in this case the error is generated when a match cannot be found in the spreadsheet) the else statement doesnt kick in and post the msgbox.
the code just crashes. and returns an error 1004 on the line i have highlighted in yellow
res = WorksheetFunction.Match(invvar, Columns(1), 0)
If Not IsError(res) Then
Me.txtClientID.Value = ws13. Cells(res, 7)
Me.txtNumber.Value = ws13.Cells(res, 7)
Me.txtDate.Value = ws13.Cells(res, 8)
'save client id as a variable
'Print to invoice------------------------------------------------------------------.....................
Vba Macro Error: Compile Error Named Argument Not Found
Apr 26, 2006I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR:
NAMED ARGUMENT NOT FOUND
Sub HPVAL()
Dim r As Range, myStr As String
myStr = "HP"
Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False)
If Not r Is Nothing Then
r = r.Value
While Not r Is Nothing
Set r = Cells.FindNext(r)
If Not r Is Nothing Then
r = r.Value
End If
Wend
End If
End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
Print Only When Value Is Found??
Jan 19, 2009Attached is this massive excel spread sheet. It has been pruned so that it can be attached to this posting. It has 27 tabs, users input orders into home unit page (ie Tercero), other sheets interface to form sheets used for deliveries (See Terc Del), production (see Friday), and summary overview (see Campus).
I would like to, using VBA, create a pop-up window that pulls up a print command box that will allow the user to print by day, or by week, print one worksheet or print all. I currently use macro buttons but print the entire page on a given tab. When asked to print a page, It would be great to be able to print column (Fri for ie.) a day say, and print only a item in a column/row that has a numeric value inputted into a cell, all the way down the page. So in this case, see the Terc DEL, print only Friday and only those fields with a number inputted into a cell.
Another option for the DEL sheets could be to print only rows with Data found in columns B,D,F,H,J,L,N tells the macro to print that entire row, to which includes A->O, if that makes sense? By doing this, my hope is to have the document print in a larger font, and column width, as there would be less info per page to deal with, and reduce the amount of paper waste. The headers of the page which is 1->5 would have to be repeated as the document printed. The first actual data field would be row 5.
The source document has a total of 200 rows (see Tercero). Other tabs will have comparable row settings, such Terc-Del, Friday, Campus.
File Print In Legal Size If I Have 56 Lines Filled In Then Print In Regular Letter Si
Oct 15, 2005I am trying to have a file print in legal size if I have 56 lines filled in
otherwise print in regular letter size. Does anyone know how to write this
in VBA.
Check A Cell For List Of Data - If Found Then Print Row
Mar 29, 2014I have a tab with different city names and then a a series of answers to a number of different questions, what I need to do is create a macro which looks a table on a different tab, and if column b matches any of the words in the table to then print that entire row of answers.
So if the information found in R1!M3:M21 is found in Results!B:B then print that row to sheet R1. If the information found in R2!M3:M22 is found in Results!B:B then print to sheet R2 etc.
This is the only other way I could describe it, however I don't think it can be done as a formula anyway (even though it is somewhat gibberish)
IF(ISNUMBER(SEARCH(R1!M3:M21,Results!B:B))print the row,move onto next row)
Macro To Print Sheets With Value In Cell A1 But Print Dynamic Ranges On Certain Sheet
Sep 24, 2013I've found some code which works to print certain pages with value in cell A1 but I need to print dynamic ranges on some of the sheets as they will have filters on so the rows ranges will be different each time.
So far this is what I have but the dynamic range part is not working:
VB:
Sub Print_All_Worksheets_With_Value_In_A1()
Dim Sh As Worksheet
Dim Arr() As String
Dim N As Integer
[Code] ....
Allow Users To Print Hidden Sheet But Not Change Print Settings
Jul 2, 2009I am having trouble disabling the "Preview" button when calling Application.Dialogs(xldialogprint) in XL2003. I have an xlSheetVeryHidden worksheet containing a form which is made visible programatically when the user wishes to print a copy (code below). I want the user to be able to have access to the functionality of the xlDialogPrint dialog (i.e. select desired print destination, number of copies, pages per sheet etc.) but I also want to prevent them modifying the page setup of the protected worksheet by initiating a preview from the print dialog.
Private Sub btnPrintReturnForm_Click()
wbkRUSC.Unprotect sysPass 'unprotect workbook to enable changes to sheet visibility
' (sysPass is project constant string containing password)
shtStaffForm.Visible = xlSheetVisible 'make staff form visible
shtCalc.Visible = xlSheetVeryHidden 'hide main calculator in case user gets smart and hits..............................
Error 448: Arugument Not Found
May 16, 2009I have a macro which prepares a report for equipment. The macro is a recorded macro and it runs perfectly on my system but when i am trying to run that in other system getting an error message"Error 448:arugument not found".Which i marked in red.
My macro code is as follows:
Sub Anirudha()
Application.ScreenUpdating = False
Range("G2").Select
ActiveCell.FormulaR1C1 = "=MID(RC4,4,6)"
Range("G2").Select
Selection.AutoFill Destination:=Range("G2:G931")
Range("G2:G931").Select
Range("A2:F2").Select
Macro Cannot Be Found Or Is Disabled Error
Mar 7, 2013I have a worksheet with several option buttons and until yesterday, I had no problem selecting them. But today, every time, I select a radio button, an error shows up stating "Cannot run Macro "Option Button_click. Macro is not available in this workbook or is disabled". When the user selects a radio button, text appears in Col B depending on what button was selected (using VLOOKUP). That stuff is still working fine. It's just as soon as I click a radio button, the error shows up.
Based on the radio button selected, user can add in information to the columns adjacent to it, and then click a button to store that information in some rows below. The code for that button is stored in the sheet module. I have tried enabling macros and disabling macros and no change has appeared. What I have noticed though is that yesterday, when i opened the workbook, a yellow bar appeared asking if I wanted to "Enable Content". Today, that bar didn't appear.
Search For String In And Error If Not Found
Feb 8, 2012I manage to do a proper search and the return value is correct, but the problem is when I don't get the correct value excel gives me an error, what I can add to make the result just to give me MsgBox "Not found"?
Code below:
Set Ran = Worksheets(2).Range("A:A").Find(CompName, lookat:=xlPart)
If Not Ran Is Nothing Then
MatchRow = Ran.Row
MatchCol = Ran.Column
End If
Using Find In Macro Without Error If Nothing Found?
Feb 12, 2013I'm trying to write some VBA which will allow me to find certain instances of data across a number of different sheets and copy this into another sheet.
However if the sheet doesn't contain the data I'm searching for an error pops up and the macro dies, is there a way to search where if the macro doesn't find anything it skips to the next line?
Runtime Error - No Cells Were Found
Oct 1, 2013I am new to VBA and created the following code:
Sub UpdateSchedule()
'
' UpdateSchedule Macro
' Save changes to schedule, create import table for MRP, and timestamp.
'
' Keyboard Shortcut: Ctrl+Shift+U
[Code] ...
When I run it it tells me that "No cells were found and the debugger highlights the following line of code:
Range("Import[FG GP'#]").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
I have tried inserting:
On Error Resume Next
Range("Import[FG GP'#]").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
On Error GoTo 0
This makes everything work except the deleting.
No Cells Found Error: 1004
Oct 4, 2009 Private Sub Worksheet_Activate()
Sheets("Search Inv").Protect UserInterFaceOnly:=True
ActiveSheet.Range("A17:F37,C39:C42,F39:F42").Select
Selection.SpecialCells(xlCellTypeConstants, 23).Select
Selection.ClearContents
End Sub
Above is meant to clear the contents of cells that contain formulas while keeping the formulas.
The sheet is protected ... no password
What is wrong ... when I activate the sheet I get: Run Time error 1004 / no cells found
(All cells that are meant to be cleared are selected ... they just don't clear)
Lookup Return Error If No Match Found
Jan 11, 2006If lookup doesn't find a match in the first column, can I get it to return an
"ERR" or "0", something that would let me know there was no match? Right now
it returns the value in the second column of the closest value.
Run-Time Error 1004 No Cells Were Found
Sep 25, 2008This macro starts out looking for the first non blank cell by looking down about a hundred cells and then going back up till it finds the first non blank cell. When it finds the first non-blank cell it goes up 1 row and adds 1 to the number for the next row. It works fine the first time then, after the file is saved it will stop the macro with the following message; Run-time error ‘1004’ No cells were found. If I format the cells in question, the macro works again until I save the file, then it happens again.
Excel 2003 11.8220.8221 SP3
I think there is a hotfix for this but I can't get it to install. Is there a way around this?
This is the portion of the code that gets the error:
Range("A11:A100").Select
Selection.SpecialCells(xlCellTypeBlanks).Select
ActiveCell.FormulaR1C1 = "=+R[-1]C+1"
UserForm - Excel Has Found An Error And Needs To Close
Sep 13, 2003when I try to do this:
Private Sub Workbook_Open()
UserForm1.show vbnomode
End Sub
I get one of those "Excel has found an error and needs to close......"
and it crashes down
MoveFolder. Run-time Error 76, Path Not Found
Jun 13, 2007I am getting the following run time error when trying to use MoveFolder from the scripting runtime library:
run-time error ‘76’
path not found
The source and destination paths are picked up out of cells and I think the spaces in the name or the length of the path names may be causing the problem.
The source folder looks something like this (contains 50 characters):
K:Example123 Folder1AB CD ESubfold,XX abcdefgh
The destination folder looks something like this (contains 60 characters):
K:Example123 Folder1XX New123AB CD ESubfold,XX abcdefgh
The code is pretty basic:
Sub MoveFolder(Sourcepath As String, Destinationpath As String)
Dim FSO As Scripting.FileSystemObject
Set FSO = New Scripting.FileSystemObject
'some code here removes the trailing backslashes on the
'end of the pathnames
FSO.MoveFolder Sourcepath, Destinationpath
End Sub
I have double checked the source path name exists. I have also tried doing it manually with the path names being entered in as text but i keep getting the error.
Handle Find Method Error When Value Not Found
Dec 19, 2007I have error trapping in place so if a find in a column returns no data the procedure continues, but the code breaks there anyway.
In Tools/Options/General/Error Trapping I have Break on Unhandled Errors checked.
I have changed my error trapping lables.
I have copied the procedure and renamed it.
File Cannot Be Found
Nov 17, 2009After entering the vba code, testing it and successfully running it, I simply 'saved as" in the excel menu, changing the name.
Now I can't run the macro any more, because the macro is looking for the file with the old original name. I can't even find any references to the old name anywhere whatsoever, within the code itselt, etc. Why does the macro code even know/remember that old name?
I've kind of found similar questions, but I do not understand the answers that people have offered. It seems someone will suggest a chunk of code to add that will say at some point "c:\temp..." etc, but this doesn't make sense to me sense I intend of storing my excel file in a number of places and it won't always have the same reference location.
For now I'd like to ask if there is some general code I can enter or some good code to use as a reference.
Compile Error - Method Or Data Member Not Found
Feb 27, 2012trying to convert an excel document to an XML document and am getting the above error. Microsoft Visual Basic highlights below.
Code:
' prompt user to save to a directory
With frmAuthenticate.dlg
.Filter = "XML Files |*.xml|"
[Code]....
Macro Runtime Error - Items (charts) Not Found
Oct 3, 2013I've got an interactive chart on a sheet where users select a chart from a combo box control and a picture link to the chart is displayed. The actual charts are on a hidden sheet. I have to activate the charts first for it to work so I put a button the sheet and recorded a macro where I unhide the hidden sheet, select each chart as I scroll down the screen by clicking on it then hide the sheet again and return to the interactive chart.
My problem is that I'm getting an error when the macro tries to select the first chart which is called "Chart 6":
Run-time error '-2147024809 (80070057)':
The item with the specified name wasn't found
I recorded the macro so I'm not sure why the macro isn't working now.
Code:
Sub ResetCharts()
'
' ResetCharts Macro
' Reset all charts
'
'
Sheets("Budget v Actual Graphs").Select
Sheets("Graph BG").Visible = True
ActiveSheet.ChartObjects("Chart 6").Activate
ActiveChart.ChartArea.Select
ActiveWindow.SmallScroll Down:=15
ActiveSheet.ChartObjects("Chart 35").Activate
[Code] ............
Excel 2010 :: Error VBA 462 Remote Server Not Found
Nov 2, 2013I have created a macro that creates a powerpoint from excel in office 2010. I have followed all the required steps, like adding object library and all. but still many times the PowerPoint crashes at slide7, 8 or 9 and have to restart. I generally get the above given error.
Code:
Sub CreatePowerPoint()
Application.ScreenUpdating = False
'Macro Created by Pallavi NC (pallavi.nc@hp.com)
'Add a reference to the Microsoft PowerPoint Library by:
'1. Go to Tools in the VBA menu
'2. Click on Reference
'3. Scroll down to Microsoft PowerPoint X.0 Object Library, check the box, and press Okay
'First we declare the variables we will be using
[code].....
