Excluding Weekends Without Analysis Toolpak
Apr 9, 2007
I currently have a formula like this:
e87-7+choose(weekday(e87-7),1,0,0,0,0,0,2
this formula is used because I was adding or subtracting a certain number of days from one date to figure out when a certain event would occur next. When the date fell on a weekend, I wanted to make sure that it rolled over to the next closest weekday.
HOWEVER, what I also want this formula to do is exclude weekends in the counting of the days. So basically, I want to exclude weekends completely from my formula.
example, Printing always occurs 4 days after the p.r. meeting. the p.r. meeting is in e87. so e87 + 4 = the printing date. but I dont want those 4 days to include weekends in the count AND I dont want the final date to fall on a weekend either.
View 9 Replies
ADVERTISEMENT
Feb 23, 2007
I found this code in the posts to automatically install the Analysis ToolPak at Open.
Private Sub Workbook_Open()
AddIns("Analysis ToolPak").Installed = True
End Sub
I tried this in the workbook module but it doesn't seem to work. Is this code correct or have I done something incorrectly?
Also, are there any drawbacks to an automatic install of an add in like this and if it runs the code every time the workbook opens, is there any performance issues (maybe only opens a bit slower)?
View 9 Replies
View Related
Nov 13, 2008
I use various spreadsheets which use the EOmonth function. The reason for this is that I have a variable start month and then move out for a set period and this is a very easy way of doing this. My only problem is that you have to have the Analysis ToolPak add-in selected, so when you send to other people, it doesn't work. I have use a bit of code to turn this on, but if the disable macros is selected than this doesn't work.
View 2 Replies
View Related
Nov 17, 2006
I have seen spreadsheets where there are macros embedded that 1) check to see if the Analysis Tookpak is loaded and 2) Load the Analysis Tookpak if it is not loaded. I would like to do the same in a spreadsheet that I am creating and using. Does someone have example macros they could share that do what I am asking?
View 6 Replies
View Related
Feb 28, 2007
A workbook was created using the English version of Excel. It uses Analysis Toolpak functions.
When the workbook is opened on a Spanish version Excel system, embedded functions - like IF, AND, OR translate to Spanish. Other functions, like NETWORKDAYS, do not.
Any cross-language users have a tool for this? Other than doing a Find/Replace or creating custom functions.
View 9 Replies
View Related
Mar 21, 2013
I am generating a spreadsheet that focuses on a target opening date. There is about 12 other headings along the top all stating the different phases of construction, permitting, etc. I need to exclude weekends and holidays from most of these columns, and only exclude holidays from about 2 of the columns. I think I am to use the formula for NETWORKDAYS, but not sure how or where to incorporate it.
View 9 Replies
View Related
Jul 16, 2013
I'm trying to have a two week rolling dates, starting on the Monday and continuing until the following Friday, this is fine if static but when the start date is then Tuesday, Wednesday etc the week then includes either the Saturday or Sunday.
From using =TODAY(), how do I populate the next ten working days without including the weekends?
View 2 Replies
View Related
Oct 17, 2006
I have a spreadsheet with bloomberg's auto feed, so in col A&B, the price will be updated everyday. I would like to calculate the Month-to- Date in Col C
e.g. MTD for today's closing = (today's closing price - last month end price)/last month end price
how can I constructure a formular in col C which will calculate the MTD automatically when a new price is added to the top everyday.
View 3 Replies
View Related
Sep 13, 2007
I want to get the list of days which are only weekdays ( excluding sat, sun but includes holidays during weekdays) I have tried WORKDAY function but it is not exactly i want coz it excludes holidays during weekdays as well.
View 5 Replies
View Related
May 22, 2008
how to find the number of days between 2 Dates excluding weekends and holidays using vba. I m using excel 2003. All I know is to figure out todays date using the keyword 'Date'.
Also, this is my second post and I have tried to comply with the rules regarding the title, but if it is still inappropriate and does not meet 'stating the problem' criteria,
View 3 Replies
View Related
Dec 4, 2013
I have a holiday and sickness chart for all of the guys in my maintenance department for the whole of next year (2014). The holidays part works fine. The sickness is split into two areas; the number of occurrences of sickness and the total number of days sick. To make the formula work for the number of occurrences it is necessary to enter sick in both Sat and Sun if the sickness spans the weekend. But we do not work the weekend and so I do not want to count those two days. The formula needs to cover the entire year (cells BL5:ZL5). The calculation that I am currently using is =COUNTIF(BL5:ZL5,"Sick")/2 (divided by two as we log a.m. and p.m. and the answer is in days). In the example attached, it would be 1 occurrence of sickness and 3 days sick, not 4 as shown.
For completeness, the formula that I am using for the occurrences is =SUMPRODUCT((BL5:ZL5="Sick")*(BL5:ZL5<>BK5:ZK5))
View 3 Replies
View Related
Apr 29, 2006
I am looking for formula to calculate the dates between two days (excluding the weekends)
I am working in Saudi Arabia and the weekend days over here are thursday and Friday.
View 9 Replies
View Related
Oct 10, 2008
I have a report that starts with a desired date and generates dates backwards on when certain releases should come out. I would like the code to see the date, move it back a week, check to make sure it's not a weekend or holiday, then post it in the cell below. If it does happen to land on a weekend, it should then be the Friday before the weekend. If it is a holiday, it should be the date before the holiday, as long as it is not a Sunday (or another holiday).
Attached is the workbook that I'm using. I'm starting with the desired date 'B7' and using the Holidays in a seperate worksheet. I know that in the current example, nothing will land on the weekend, unless the holiday pushes it back to one.
View 4 Replies
View Related
Jun 8, 2008
I wanted to calculate the difference between dates, excluding the weekends. After much thought i used =NETWORKDAYS(A1,B1)+IF(NETWORKDAYS(A1,A1)+ NETWORKDAYS(B1,B1)=2,-SIGN(NETWORKDAYS(A1,B1)),0) that seemed to be working fine. However, I had a problem today with this formula when my start day was saturday (24/05/08) and the last day was monday (26/05/08). What i want is that when i take the difference between these two days, i should get zero as answer as we are not including the weekends in calculation so the start date should ideally be the first weekday which is Monday. However, the formula is giving me 1 as an answer.
This formula works fine if i select 27/05/08 as last date in which case i get 2 as an answer which is right. In gist, what i am looking for is a formula which will give me the difference between two dates and exclude the weekends from the calculation. The last date can't be a weekend, but the start date can. Hence, whenever the start date is a weekend, the formula should take monday as a start day.
View 9 Replies
View Related
Jun 9, 2007
I am trying to set up a sick leave list which will work out the cumulative total for the last 12 months (from last day of last sick entry). The problem I have, as the is is added to, I need a function/formula to work out 12 months from last date and then add up the no. of sick days from then to the last date. Hope this is clear. The next problem is I need it to work out total days and then without weekends. Below is the chart I have to work out.
Column 1 Start date of sickness
column 2 End date
Column 3 the number of days sick in period (column 2 less column 1 in days)
column 4 the number of days sick in period above excluding week ends (column
2 less column 1, less weekends in days)
column 5 total sick days in last 12 months from date in column 2 going back
a year including weekends
column 6 total sick days in last 12 months from date in column 2 going back
a year excluding weekends
What function or formulas can I use to calculate column 3,4,5 & 6. I am a not very experienecd in Excel
View 7 Replies
View Related
Aug 25, 2007
I am using the same structure to update another column, under the same sub:
If Target.Column = 5 Then '
Select Case Range("d69").Value
Case "CB1W"
ActiveCell.Value = DateAdd("ww", 1, Now())
Case "CB2W"
ActiveCell.Value = DateAdd("ww", 2, Now())
Case "CB3W"
ActiveCell.Value = DateAdd("d", 21, Now())
Case "CB4W"
ActiveCell.Value = DateAdd("d", 28, Now())
Case "CB5W"
ActiveCell.Value = DateAdd("d", 35, Now())
Case "NI"
ActiveCell.Value = ""
Case Else
ActiveCell.Value = ""
End Select
I would like to apply the code to the whole column but if I change Select Case Range("d69").Value to Select Case Range("d2:1000").Value I get a Type Mismatch Error (13) - (on Case "CB1W" ) - column d cells are data validation drop down boxes that get their value form a named ranged :Lead_Status. The column is also formatted as Text. (I applied the code to d69 because I have data already in the other cells which I don't want altered till I have the code working)
I would also greatly appreciate your advice on how to incorporate the WEEKDAY function to exclude weekends for the DateAdd function.
View 9 Replies
View Related
Feb 26, 2014
Is there a way to autofill dates in excel to exclude weekends and bank holidays?
View 6 Replies
View Related
Dec 5, 2013
I am trying to run a macro to put in the Month, Day, Year on each tab but I want it to exclude holidays and weekends. I am not a techie or anything but I would like to know how to do this. I have tried various vb codes but they don't exclude the weekends/holidays.
View 3 Replies
View Related
Jun 2, 2014
I have a worksheet where I capture the date and time of each new entry in column A.
In the next column, it's counting up the number of hours since that entry was made. However, it's including Saturdays and Sundays in this count and I was wondering if there's a formula to calculate the number of hours excluding Saturdays and Sundays? I know that network days would count the number of working days from one date to the next, but really need hours. Is this possible?
View 3 Replies
View Related
Oct 30, 2009
How should I calculate working hours between two dates? Say if start at 9/25/2009 7:26:13 PM and finish at 10/20/2009 9:46:13 AM, the function should return 245:20:00 because the working hours are from 8am to 11 PM (8 - 23), and there are weekends between the dates. Preferably the function should work like the NETWORKDAYS() function, but it should also include the time, not just the dates.
View 9 Replies
View Related
Feb 12, 2010
I've been reading up on Excel's date and time functions and can't really figure out the best way of doing this.
I have a total amount of time that a machine should take to finish a task. I'd like to enter a date and time into a cell (Start Date) and have another cell return the date and time that the machine should be done with the task excluding weekends, and holidays (End Date). This would be based on a certain number of "working hours" (hours in the workday minus break periods) that would be calculated in another cell.
View 9 Replies
View Related
Feb 15, 2008
I am trying to calculate downtime for a Service Level Agreement.
The data that I have is the start date/time and the resolved date/time for an incident.
The data are in the format - 1/1/2008 03:32 AM. The incidents may occur at any time but downtime is calculated only business hours and excludes weekends. I may be required to exclude holidays but that is not a hard requirement right now. What I must be able to specify are the working hours.
As example(s)
- if an incident is generated on 1/2/2008 4:00 PM and resolved at 1/3/2008 11:00 AM then the downtime is 4 hours.
- if an incident is generated on 1/12/2008 4:00 PM (which is a Sat) and resolved at 1/14/2008 11:00 AM (which is Monday) then the downtime is 3 hours.
The above assumes working hours are 8:00 AM through 5:00 PM.
I have tried using the NETWORKDAYS and WORKDAY functions with little success.
View 9 Replies
View Related
Aug 6, 2012
I want to create a formula that works out the number of days between two dates but excludes weekends?
View 3 Replies
View Related
Nov 22, 2006
in excel, is there a place called data analysis under tools? im an exchange student in sweden andthe work that teacher gave me is half swedish and half english.. im looking for histogram there.
View 3 Replies
View Related
May 24, 2008
I need to count the hours between dates eliminating the 48 hours for the weekend starting at 0:700 Saturday and recommencing at 0:700 Monday morning.
View 9 Replies
View Related
Sep 21, 2009
I am trying to figure out how to take holidays and weekends out of my data.
View 9 Replies
View Related
Sep 28, 2009
I have a spreadsheet which will be used to measure raw material consumption by day.
I wish to list all days of a year down a column - that I can do.
However, I would like to conditionally format any cell (preferably the row) which contains either a Saturday or a Sunday.
View 9 Replies
View Related
Aug 7, 2009
I need to write a program that will take numbers from various sheets, do a function on them (specifically a statistical analysis), and print that number to a cell on one sheet. I've tried to have all of the numbers go to one cell and have the analysis done on them, but after so many sheets, I get a memory error. I don't necessarily need all of the numbers to be saved, just the result is what I need.
View 14 Replies
View Related
May 11, 2009
how to tackle a piece of work that I really don't want to do.
We have extracted some summary information on one of our products. The workbook has 10 sheets, one for each of our 10 main sales channels. Each sheet has the same layout of information on. There are 7 tables on each sheet, and each one cuts the data in a different way (eg one summarises by age of purchaser (in age bands), another by demographic group etc). Each table then has the same 14 columns of key data (eg number of sales, average order value).
I've been asked to analyse this information "for anything interesting". At the moment, the only way I can think to do this is to print out the 10 sheets, sit down with a highlighter, and try to visually identify trends and anomalies. The idea fills me with dread, and I suspect will be quite inefficient.
I've asked whether I can get the data in a pivot table or some other format that might be more conducive to analysis, and have been told no. (There will easily be more than 100,000 lines in the original data (we're using Excel 2003)). To be honest, I'm not sure that I'd really be that much better off, even if it were in a pivot table.
View 9 Replies
View Related
Aug 20, 2009
to figure out a breakeven analysis.
Here is the situation. I bought 100 shares of stock at $40 each for total investment of $4000. The stock price is now $26 a share so the investment is down $1,400. I want to figure out the number of additional shares I need to buy at $26 so that when the price goes to $26.01 i turn a profit.
View 9 Replies
View Related
