I'm trying to have a two week rolling dates, starting on the Monday and continuing until the following Friday, this is fine if static but when the start date is then Tuesday, Wednesday etc the week then includes either the Saturday or Sunday.
From using =TODAY(), how do I populate the next ten working days without including the weekends?
I have a report that starts with a desired date and generates dates backwards on when certain releases should come out. I would like the code to see the date, move it back a week, check to make sure it's not a weekend or holiday, then post it in the cell below. If it does happen to land on a weekend, it should then be the Friday before the weekend. If it is a holiday, it should be the date before the holiday, as long as it is not a Sunday (or another holiday).
Attached is the workbook that I'm using. I'm starting with the desired date 'B7' and using the Holidays in a seperate worksheet. I know that in the current example, nothing will land on the weekend, unless the holiday pushes it back to one.
I am using the same structure to update another column, under the same sub:
If Target.Column = 5 Then '
Select Case Range("d69").Value
Case "CB1W"
ActiveCell.Value = DateAdd("ww", 1, Now())
Case "CB2W"
ActiveCell.Value = DateAdd("ww", 2, Now())
Case "CB3W"
ActiveCell.Value = DateAdd("d", 21, Now())
Case "CB4W"
ActiveCell.Value = DateAdd("d", 28, Now())
Case "CB5W"
ActiveCell.Value = DateAdd("d", 35, Now())
Case "NI"
ActiveCell.Value = ""
Case Else
ActiveCell.Value = ""
End Select
I would like to apply the code to the whole column but if I change Select Case Range("d69").Value to Select Case Range("d2:1000").Value I get a Type Mismatch Error (13) - (on Case "CB1W" ) - column d cells are data validation drop down boxes that get their value form a named ranged :Lead_Status. The column is also formatted as Text. (I applied the code to d69 because I have data already in the other cells which I don't want altered till I have the code working)
I would also greatly appreciate your advice on how to incorporate the WEEKDAY function to exclude weekends for the DateAdd function.
I've been reading up on Excel's date and time functions and can't really figure out the best way of doing this.
I have a total amount of time that a machine should take to finish a task. I'd like to enter a date and time into a cell (Start Date) and have another cell return the date and time that the machine should be done with the task excluding weekends, and holidays (End Date). This would be based on a certain number of "working hours" (hours in the workday minus break periods) that would be calculated in another cell.
I am generating a spreadsheet that focuses on a target opening date. There is about 12 other headings along the top all stating the different phases of construction, permitting, etc. I need to exclude weekends and holidays from most of these columns, and only exclude holidays from about 2 of the columns. I think I am to use the formula for NETWORKDAYS, but not sure how or where to incorporate it.
View 9 Replies View RelatedI currently have a formula like this:
e87-7+choose(weekday(e87-7),1,0,0,0,0,0,2
this formula is used because I was adding or subtracting a certain number of days from one date to figure out when a certain event would occur next. When the date fell on a weekend, I wanted to make sure that it rolled over to the next closest weekday.
HOWEVER, what I also want this formula to do is exclude weekends in the counting of the days. So basically, I want to exclude weekends completely from my formula.
example, Printing always occurs 4 days after the p.r. meeting. the p.r. meeting is in e87. so e87 + 4 = the printing date. but I dont want those 4 days to include weekends in the count AND I dont want the final date to fall on a weekend either.
I have a spreadsheet with bloomberg's auto feed, so in col A&B, the price will be updated everyday. I would like to calculate the Month-to- Date in Col C
e.g. MTD for today's closing = (today's closing price - last month end price)/last month end price
how can I constructure a formular in col C which will calculate the MTD automatically when a new price is added to the top everyday.
I want to get the list of days which are only weekdays ( excluding sat, sun but includes holidays during weekdays) I have tried WORKDAY function but it is not exactly i want coz it excludes holidays during weekdays as well.
View 5 Replies View Relatedhow to find the number of days between 2 Dates excluding weekends and holidays using vba. I m using excel 2003. All I know is to figure out todays date using the keyword 'Date'.
Also, this is my second post and I have tried to comply with the rules regarding the title, but if it is still inappropriate and does not meet 'stating the problem' criteria,
I have a holiday and sickness chart for all of the guys in my maintenance department for the whole of next year (2014). The holidays part works fine. The sickness is split into two areas; the number of occurrences of sickness and the total number of days sick. To make the formula work for the number of occurrences it is necessary to enter sick in both Sat and Sun if the sickness spans the weekend. But we do not work the weekend and so I do not want to count those two days. The formula needs to cover the entire year (cells BL5:ZL5). The calculation that I am currently using is =COUNTIF(BL5:ZL5,"Sick")/2 (divided by two as we log a.m. and p.m. and the answer is in days). In the example attached, it would be 1 occurrence of sickness and 3 days sick, not 4 as shown.
For completeness, the formula that I am using for the occurrences is =SUMPRODUCT((BL5:ZL5="Sick")*(BL5:ZL5<>BK5:ZK5))
I am looking for formula to calculate the dates between two days (excluding the weekends)
I am working in Saudi Arabia and the weekend days over here are thursday and Friday.
I wanted to calculate the difference between dates, excluding the weekends. After much thought i used =NETWORKDAYS(A1,B1)+IF(NETWORKDAYS(A1,A1)+ NETWORKDAYS(B1,B1)=2,-SIGN(NETWORKDAYS(A1,B1)),0) that seemed to be working fine. However, I had a problem today with this formula when my start day was saturday (24/05/08) and the last day was monday (26/05/08). What i want is that when i take the difference between these two days, i should get zero as answer as we are not including the weekends in calculation so the start date should ideally be the first weekday which is Monday. However, the formula is giving me 1 as an answer.
This formula works fine if i select 27/05/08 as last date in which case i get 2 as an answer which is right. In gist, what i am looking for is a formula which will give me the difference between two dates and exclude the weekends from the calculation. The last date can't be a weekend, but the start date can. Hence, whenever the start date is a weekend, the formula should take monday as a start day.
I am trying to set up a sick leave list which will work out the cumulative total for the last 12 months (from last day of last sick entry). The problem I have, as the is is added to, I need a function/formula to work out 12 months from last date and then add up the no. of sick days from then to the last date. Hope this is clear. The next problem is I need it to work out total days and then without weekends. Below is the chart I have to work out.
Column 1 Start date of sickness
column 2 End date
Column 3 the number of days sick in period (column 2 less column 1 in days)
column 4 the number of days sick in period above excluding week ends (column
2 less column 1, less weekends in days)
column 5 total sick days in last 12 months from date in column 2 going back
a year including weekends
column 6 total sick days in last 12 months from date in column 2 going back
a year excluding weekends
What function or formulas can I use to calculate column 3,4,5 & 6. I am a not very experienecd in Excel
Is there a way to autofill dates in excel to exclude weekends and bank holidays?
View 6 Replies View RelatedI am trying to run a macro to put in the Month, Day, Year on each tab but I want it to exclude holidays and weekends. I am not a techie or anything but I would like to know how to do this. I have tried various vb codes but they don't exclude the weekends/holidays.
View 3 Replies View RelatedI have a worksheet where I capture the date and time of each new entry in column A.
In the next column, it's counting up the number of hours since that entry was made. However, it's including Saturdays and Sundays in this count and I was wondering if there's a formula to calculate the number of hours excluding Saturdays and Sundays? I know that network days would count the number of working days from one date to the next, but really need hours. Is this possible?
How should I calculate working hours between two dates? Say if start at 9/25/2009 7:26:13 PM and finish at 10/20/2009 9:46:13 AM, the function should return 245:20:00 because the working hours are from 8am to 11 PM (8 - 23), and there are weekends between the dates. Preferably the function should work like the NETWORKDAYS() function, but it should also include the time, not just the dates.
View 9 Replies View RelatedI am trying to calculate downtime for a Service Level Agreement.
The data that I have is the start date/time and the resolved date/time for an incident.
The data are in the format - 1/1/2008 03:32 AM. The incidents may occur at any time but downtime is calculated only business hours and excludes weekends. I may be required to exclude holidays but that is not a hard requirement right now. What I must be able to specify are the working hours.
As example(s)
- if an incident is generated on 1/2/2008 4:00 PM and resolved at 1/3/2008 11:00 AM then the downtime is 4 hours.
- if an incident is generated on 1/12/2008 4:00 PM (which is a Sat) and resolved at 1/14/2008 11:00 AM (which is Monday) then the downtime is 3 hours.
The above assumes working hours are 8:00 AM through 5:00 PM.
I have tried using the NETWORKDAYS and WORKDAY functions with little success.
I want to create a formula that works out the number of days between two dates but excludes weekends?
View 3 Replies View Relatedwhat formula I can use to calculate the difference between two dates while not including weekends. For example in cell A1 I have 27-Feb-07 and in B1 I have 05-Mar-07 ; it is possible to to calculate the difference between these by not including weekends. The weekends I am refering to are Saturday and Sunday.
View 7 Replies View Relatedformula to input to excel to get the dates rolling down in A cell i want it to go A1(1/1/2014) A2(1/1/2014) then a3(2/1/2014) a4(2/1/2014) a5(3/1/2014) a6(3/1/2014) i have a lot of these dates to put into excel
View 5 Replies View RelatedI am trying to create a schedule that includes weekdays only. Is there a formula or set-up step to do that?
Currently I have 3 columns:
Start date Action date Finish date
The Action date column has the formula: that cell (say C4) minus number of days that action requires (say 10), but when 10 days fall on a weekend, I need to change to the next work day instead.
I just want to ask if we can create a formula that will not go to saturdays and sundays. example :
I use =today()+3 so it means if today is tuesday the result is friday, if im going to open it tomorrow the result will adjust to saturday if that happens i want the day to be automatically go back on friday, the date itself, so it means i'll just wait on friday to get the result as "monday". It just avoid saturdays and sundays,. Is that possible? By the way, format would be m/d/yyyy.
I have been trying to count dates in my spreadsheet. The dates are supposed to go back in time (what they do). But I want them to jump over the weekends' dates instead of landing on them.
What I have is Start Date, Req'd Qty, Days it takes to make, Date it is required to start production (which I have a problem with).
A
1 26-Nov [Thursday]
2 1500
3 5
4 'Problem' I used for this cell that formula: =if(A2>0,A1-A3,"") , as I don't want it to show anything if there is no requirements.
It comes back with 21-Nov which is Saturday when I want it to come back with 19-Nov (Thursday) as we only have 5 working days in a week.
i'm trying to count dates within a 2 week date range. I don't want to update the formula every day to the actual dates that would make up two weeks so I tried this formula but it keeps giving me an error.
VB:
=COUNTIFS(Tracker!I2:I479, "=>" TODAY()+1,Tracker!I2:I479,"<=" TODAY()+14)
I have the formula for calculating a 13 week rolling average, but I need to be able to set goals in the future and still have the average calculate from current and not from future.
I have my dates set up in row 3 (these dates are all mondays, not every day) and my data in row 4. I need the 13 week rolling average to calculate starting from the prior monday and going back 12 more mondays for the 13 weeks. IE: This monday I'm running reports that the info will be entered into the previous week's monday.
Here is the formula that I'm currently using: =AVERAGE(OFFSET(K4,,COUNT(K4:BV4)-13,,13))
The formula works but will calculate the average for 13 weeks prior based on the last cell with data in it. It's calculating the average of the last 13 weeks of next year.
how to make this work without having to remember my weekly goals every week??
I have a formula which works =SUMPRODUCT((MONTH(F7:M7=2) *(F12:M12="S"))) but only calcautes the S over certain dates. (F7:M7) Are the dates. i need to incorporate the today formuala so it works from 12 months from today. 12 months rollings (so figures wll change daily).
01 January 2014
02 January 2014
03 January 2014
04 January 2014
05 January 2014
06 January 2014
07 January 2014
08 January 2014
#########
#########
[code]....
I want to calculate a date that is 28 days in the future. I don't want to exclude any days - However - if the end date falls on a weekend or holiday, I would like to push it out to the next business day.
I currently have the weekends covered, but am stumped on the holidays.
(For weekends, I am using the WEEKDAY function on a hidden sheet, and then the following 3 IF statements:
IF today + 28 = Mon.-Fri., then give me today + 28.
IF today + 28 = Sat., then give me today + 30.
IF today + 28=Sun., then give me today + 29.
I have tried adding an additional IF statement to address a specific holiday - namely, President's Day on 2/18/08, which is a Monday - but it won't add the extra day, because I think my initial IF statement re: Monday being today + 28 is overriding it.
What calculation would I enter in a results cell if I wanted to find the delta between 2 times in date format that repersent just the business hours of 8am-5pm, therefore excluding after hours and weekends.
eg.
Date 1 Date 2 Result Time
23/07/07 8:00 24/07/07 14:55 15:55
So far I can't get the caluclation that will compensate for the after hours and week ends.
I have a spreadsheet that tracks “points” for hourly associates on a daily basis that totals weekly and monthly. This spreadsheet works on a rolling calendar year instead of a fiscal and I need to be able to capture the totals for periods of time by days.
For example, I would need to view how many points ‘employee x’ has from 2/25/09 through 2/25/10. I have attached the spreadsheet, which includes tabs for each week ending and a summary page.