I want to get the list of days which are only weekdays ( excluding sat, sun but includes holidays during weekdays) I have tried WORKDAY function but it is not exactly i want coz it excludes holidays during weekdays as well.
View 5 RepliesI am using office 2003 and I need to create the conditional (just like in the attached image), but I need that the days -1 (day) -2(days) or -3 (days) that are in the end of each formula, I need them to be weekdays (i don't want the to count weekends.
View 3 Replies View RelatedI would like to be able to auto fill weekdays (skipping Saturday & Sunday) in a month. For example, my spreadsheet would look like this if cell A1 contains12/01/09:
DATE WORKDAYS TASK
1-Dec 1 AP CLOSE - CAPITAL & POS ITEMS
1-Dec 1 POS MONTH END
1-Dec 1 HEALTH INSURANCE
2-Dec 2 DEPR SYSTEM RUN; INCL-SOFTWARE AMORT
2-Dec 2 SPECIAL EQUIPMENT
4-Dec 4 PRELIMINARY ENERGY REPORT
7-Dec 5 AP CLOSE - ALL OTHER ITEMS
The DATE column needs to return the date for WORKDAYS listed...Monday through Friday only. The first workday in Dec 2009 is 12/1, the fifth workday is 12/7, and so on.
I am generating a spreadsheet that focuses on a target opening date. There is about 12 other headings along the top all stating the different phases of construction, permitting, etc. I need to exclude weekends and holidays from most of these columns, and only exclude holidays from about 2 of the columns. I think I am to use the formula for NETWORKDAYS, but not sure how or where to incorporate it.
View 9 Replies View RelatedI'm trying to have a two week rolling dates, starting on the Monday and continuing until the following Friday, this is fine if static but when the start date is then Tuesday, Wednesday etc the week then includes either the Saturday or Sunday.
From using =TODAY(), how do I populate the next ten working days without including the weekends?
I currently have a formula like this:
e87-7+choose(weekday(e87-7),1,0,0,0,0,0,2
this formula is used because I was adding or subtracting a certain number of days from one date to figure out when a certain event would occur next. When the date fell on a weekend, I wanted to make sure that it rolled over to the next closest weekday.
HOWEVER, what I also want this formula to do is exclude weekends in the counting of the days. So basically, I want to exclude weekends completely from my formula.
example, Printing always occurs 4 days after the p.r. meeting. the p.r. meeting is in e87. so e87 + 4 = the printing date. but I dont want those 4 days to include weekends in the count AND I dont want the final date to fall on a weekend either.
I have a spreadsheet with bloomberg's auto feed, so in col A&B, the price will be updated everyday. I would like to calculate the Month-to- Date in Col C
e.g. MTD for today's closing = (today's closing price - last month end price)/last month end price
how can I constructure a formular in col C which will calculate the MTD automatically when a new price is added to the top everyday.
how to find the number of days between 2 Dates excluding weekends and holidays using vba. I m using excel 2003. All I know is to figure out todays date using the keyword 'Date'.
Also, this is my second post and I have tried to comply with the rules regarding the title, but if it is still inappropriate and does not meet 'stating the problem' criteria,
I have a holiday and sickness chart for all of the guys in my maintenance department for the whole of next year (2014). The holidays part works fine. The sickness is split into two areas; the number of occurrences of sickness and the total number of days sick. To make the formula work for the number of occurrences it is necessary to enter sick in both Sat and Sun if the sickness spans the weekend. But we do not work the weekend and so I do not want to count those two days. The formula needs to cover the entire year (cells BL5:ZL5). The calculation that I am currently using is =COUNTIF(BL5:ZL5,"Sick")/2 (divided by two as we log a.m. and p.m. and the answer is in days). In the example attached, it would be 1 occurrence of sickness and 3 days sick, not 4 as shown.
For completeness, the formula that I am using for the occurrences is =SUMPRODUCT((BL5:ZL5="Sick")*(BL5:ZL5<>BK5:ZK5))
I am looking for formula to calculate the dates between two days (excluding the weekends)
I am working in Saudi Arabia and the weekend days over here are thursday and Friday.
I have a report that starts with a desired date and generates dates backwards on when certain releases should come out. I would like the code to see the date, move it back a week, check to make sure it's not a weekend or holiday, then post it in the cell below. If it does happen to land on a weekend, it should then be the Friday before the weekend. If it is a holiday, it should be the date before the holiday, as long as it is not a Sunday (or another holiday).
Attached is the workbook that I'm using. I'm starting with the desired date 'B7' and using the Holidays in a seperate worksheet. I know that in the current example, nothing will land on the weekend, unless the holiday pushes it back to one.
I wanted to calculate the difference between dates, excluding the weekends. After much thought i used =NETWORKDAYS(A1,B1)+IF(NETWORKDAYS(A1,A1)+ NETWORKDAYS(B1,B1)=2,-SIGN(NETWORKDAYS(A1,B1)),0) that seemed to be working fine. However, I had a problem today with this formula when my start day was saturday (24/05/08) and the last day was monday (26/05/08). What i want is that when i take the difference between these two days, i should get zero as answer as we are not including the weekends in calculation so the start date should ideally be the first weekday which is Monday. However, the formula is giving me 1 as an answer.
This formula works fine if i select 27/05/08 as last date in which case i get 2 as an answer which is right. In gist, what i am looking for is a formula which will give me the difference between two dates and exclude the weekends from the calculation. The last date can't be a weekend, but the start date can. Hence, whenever the start date is a weekend, the formula should take monday as a start day.
I am trying to set up a sick leave list which will work out the cumulative total for the last 12 months (from last day of last sick entry). The problem I have, as the is is added to, I need a function/formula to work out 12 months from last date and then add up the no. of sick days from then to the last date. Hope this is clear. The next problem is I need it to work out total days and then without weekends. Below is the chart I have to work out.
Column 1 Start date of sickness
column 2 End date
Column 3 the number of days sick in period (column 2 less column 1 in days)
column 4 the number of days sick in period above excluding week ends (column
2 less column 1, less weekends in days)
column 5 total sick days in last 12 months from date in column 2 going back
a year including weekends
column 6 total sick days in last 12 months from date in column 2 going back
a year excluding weekends
What function or formulas can I use to calculate column 3,4,5 & 6. I am a not very experienecd in Excel
I am using the same structure to update another column, under the same sub:
If Target.Column = 5 Then '
Select Case Range("d69").Value
Case "CB1W"
ActiveCell.Value = DateAdd("ww", 1, Now())
Case "CB2W"
ActiveCell.Value = DateAdd("ww", 2, Now())
Case "CB3W"
ActiveCell.Value = DateAdd("d", 21, Now())
Case "CB4W"
ActiveCell.Value = DateAdd("d", 28, Now())
Case "CB5W"
ActiveCell.Value = DateAdd("d", 35, Now())
Case "NI"
ActiveCell.Value = ""
Case Else
ActiveCell.Value = ""
End Select
I would like to apply the code to the whole column but if I change Select Case Range("d69").Value to Select Case Range("d2:1000").Value I get a Type Mismatch Error (13) - (on Case "CB1W" ) - column d cells are data validation drop down boxes that get their value form a named ranged :Lead_Status. The column is also formatted as Text. (I applied the code to d69 because I have data already in the other cells which I don't want altered till I have the code working)
I would also greatly appreciate your advice on how to incorporate the WEEKDAY function to exclude weekends for the DateAdd function.
Is there a way to autofill dates in excel to exclude weekends and bank holidays?
View 6 Replies View RelatedI am trying to run a macro to put in the Month, Day, Year on each tab but I want it to exclude holidays and weekends. I am not a techie or anything but I would like to know how to do this. I have tried various vb codes but they don't exclude the weekends/holidays.
View 3 Replies View RelatedI have a worksheet where I capture the date and time of each new entry in column A.
In the next column, it's counting up the number of hours since that entry was made. However, it's including Saturdays and Sundays in this count and I was wondering if there's a formula to calculate the number of hours excluding Saturdays and Sundays? I know that network days would count the number of working days from one date to the next, but really need hours. Is this possible?
How should I calculate working hours between two dates? Say if start at 9/25/2009 7:26:13 PM and finish at 10/20/2009 9:46:13 AM, the function should return 245:20:00 because the working hours are from 8am to 11 PM (8 - 23), and there are weekends between the dates. Preferably the function should work like the NETWORKDAYS() function, but it should also include the time, not just the dates.
View 9 Replies View RelatedI've been reading up on Excel's date and time functions and can't really figure out the best way of doing this.
I have a total amount of time that a machine should take to finish a task. I'd like to enter a date and time into a cell (Start Date) and have another cell return the date and time that the machine should be done with the task excluding weekends, and holidays (End Date). This would be based on a certain number of "working hours" (hours in the workday minus break periods) that would be calculated in another cell.
I am trying to calculate downtime for a Service Level Agreement.
The data that I have is the start date/time and the resolved date/time for an incident.
The data are in the format - 1/1/2008 03:32 AM. The incidents may occur at any time but downtime is calculated only business hours and excludes weekends. I may be required to exclude holidays but that is not a hard requirement right now. What I must be able to specify are the working hours.
As example(s)
- if an incident is generated on 1/2/2008 4:00 PM and resolved at 1/3/2008 11:00 AM then the downtime is 4 hours.
- if an incident is generated on 1/12/2008 4:00 PM (which is a Sat) and resolved at 1/14/2008 11:00 AM (which is Monday) then the downtime is 3 hours.
The above assumes working hours are 8:00 AM through 5:00 PM.
I have tried using the NETWORKDAYS and WORKDAY functions with little success.
I want to create a formula that works out the number of days between two dates but excludes weekends?
View 3 Replies View RelatedI am currently assigning dates to a list manually by giving 5 dates on Mondays to Fridays. I currenly need to do this for around 500 rows and as you can imagine this takes some time.
Is there a way to have a formula that would assign for instance 5 dates on each weekday, purley by dragging the formula down?
For example....
ID
Date
a
07/30/12
b
07/30/12
[Code] ......
In cell A1 I have an input cell where a date is to be inserted manually.
In column l I have holidays listed.
Is it possuble to use validatio or something that will make it impossible to enter eighter a weekend or a date out of the holiday list?
I need to create a report on each friday as well as on every last workday of a month. I have to display both weekly and monthly data on the same graphs and I always arranged the week ends and month ends myself, but this is taking a lot of time.
So I need a chronological list of of week numbers and month names based on the date of Friday of a week or last workday of a month.
Input:
A1 - either month name ("MMM", Jul, Aug, Sep) or week number (1-52)
A2 - year number (2014)
Output:
For example, for 30 in A1 and 2014 in A2 it should look like this:
BD
BE
BF
BG
BH
BI
BJ
BK
BL
BM
1
May
23
24
25
26
Jun
27
28
29
30
And this should strech back all the way back to B1 in which I need to have 31.
Note if a month ends on last workday of a month the week number should come first and month name second.
I've got two long columns of dates and names. The dates and names can repeat. Eg:
01/01/14
Fred
01/01/14
Joe
01/01/14
Tom
[Code] ........
I want to input a date and create a list of names with only the names from the date I enter and earlier, and excluding names that appear again with a later date.
E.g. if I enter 01/01/14 I'd get:
Joe
Tom
But not Fred, as although he appears on 01/01/14 he also appears with a later date too.
I have a column with values, say column a. In column a are several rows with values equal to zero. I would now like to create a new list that omits the values that are zero, e.g.:
original list:
23
0
54
76
0
0
new list:
23
54
76
I'm making an attendance list that calculates regular hour and overtime hours for days in a month on rows. Besides the number of hours, there's input for v and s, which stand for vacations and sick days. I'm using the "if" function to separate hour and overtime, and when I put v or s in a cell it messes up my totals. Is there a way to make it so that the cells with v or s don't affect my other columns?
View 4 Replies View RelatedIn A1 to A10 I have numbers 1 through 10.
In B1 to B10 I have some of the numbers listed from column A, but not all, and in no particular order.
In column C, I would like to list only numbers from A that are not listed in B.
I would like to use a formula to take the starting date in cell A1 and then have Excel give me a list of all the dates for 2009 excluding Sundays.
So A1 would be 1/01/09
Then Excel would list
Thursday, Jan 01
Friday, Jan 02
Saturday, Jan 03
Monday, Jan 05
Tuesday, Jan 06
etc....
I've tried messing with the WEEKDAY function, but can't seem to figure it out.
I need the VBA/UDF to produce a column of dates between a start date and end date, excluding Sundays.
I can see lots, excluding weekends, but very little for just Sundays.