I have the following which does what it says it does.
What I can't figure out is, If the used range Starting in row A5 is greater then or less then A50 not to apply the borders.
.Range("A5:M50").BorderAround Weight:=xlHairline
.Range("A5:M50").Borders(xlInsideVertical).Weight = xlHairline
.Range("A5:M50").Borders(xlInsideHorizontal).Weight = xlHairline
I've got a spreadsheet with several rows and the numbers within those rows are totalled up at the bottom. Is there a way where i can highlight the cell within the spreadsheet and it takes it off the accumulative total at the bottom? or something similar to this effect? I just don't want to have to remove figures from this spreadsheet and highlighting will be a good way of seeing what has been done
View 1 Replies View RelatedI learnt that " " & can combine the text and figure. However, when it comes to a negative numbers, i dont know how to maneouver it. Eg, Cell A1 is USD(50,000.00) and the comment in Cell B1 is Cost is USD(50,000.00). So the function in B1 = "Cost is "& what to put here?
View 3 Replies View Relatedhow can I get excel to show the highest and lowest figures in a range to display in another 2 cells. Can this be done without having to sort the data and remove all of the other rows except highest and lowest. I am using Excel 2003.
View 5 Replies View RelatedI am trying to work out how to select a range from a formula.
One formula works out when a specific number in a list of rows is reached, and returns the number of values it counted before it reached the number.
MATCH(TRUE,INDEX($A$2:$A$50>=B1,0),0)
With the figure returned from that can I then select the range from the first row, to the number of rows counted. And with that selection find the highest number within that range, specifying the highest number as the result?
Basically I'm doing a excel spreadsheet where i have a range of cells where we can input some figures or amount. If the cells they indicated exceed a certain amt example: 800, i would want it to show an error msg. I know it maybe sound simple, but have been using the if and countif formula which keep on showing error to me.
View 3 Replies View RelatedI need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies View RelatedI have tried searching for it but I must not be entering the correct criteria.
how to figure a person's age if all I have is that person's birthdate?
i'm doing a process and in column N, i would need to have the following combinations:
A1
A2
C1
C2
H1
I1
so basically, a formula that would figure out the combinations available!
can this be done using a formula?
******** ******************** ************************************************************************>Microsoft Excel - Cost Calculator---V5---Try.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutK39=
KLMN39A12 40B 41C12 42D 43E 44F 45G 46H11 47I11 48J Cost Calculator
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I have a command button (code listed below) which is 1/2 working. I have a column of PID's (numbers) sorted in ascending order which includes multiple rows with the same PID. When the command is executed, I want to insert a new row after the last matched PID (this part of the code works fine),
or
Insert a new row for the non-existent PID but in the correct sorted location (this is what I can not seem to figure out how to get to work).
My data looks like this in the PID column.
PID (my header row in A1)
158
158
159
161
163
163
163
164
I can successfully insert another line 158, or 159, but can not determine where to insert a line for PID 160 (which is not in the list yet)..................
I have this great code, but I can;t figure out how to add more columns to it.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
If Target.Column = 2 Then
If Target.Value = "Q" Then
With Target
.Value = ""
End With
Else
With Target
With Selection.Font
.Name = "Wingdings 2"
.Size = 22
End With
.Value = "Q"
End With
End If
Cancel = True
End If
End Sub
Here is what my table is im working with. The tite "todays date starts in Cell A1 and B1 is =Today().
I need to figure out how to do an if for the over 30,60,90 past due. Here the logic I need to figure out:
in the Over 30 column, the logic of the statement is as follows: If the difference between today's date and the date of the invoice is greater than 30 and equal to or less than 60, the amount goes into this column.(over 30 E3) To get the amount(the ammount in C3) into the Current column, the difference between the two dates must be less than 30. To get into the over 90 column, the difference between the two dates must be greater than 90. You can figure out the over sixty column. And this needs to be copied to the remaining colums
Today’s date: =TODAY() Shop Invoice Date Invoice Amount Current Over 30 Over 60 Over 90 Ludwig's Landromat =TODAY()-72 $432.78 Willie's Washing =TODAY()-107 $565.11 Wash It Here =TODAY()-80 $308.47 Spiffy Wash and Dry =TODAY()-58 $725.37 Water Soap & Hot Air =TODAY()-30 $427.95 Wash it & Dry it =TODAY()-90 $603.91 Acme Wash & Dry =TODAY()-60 $332.35 Totals
I have been building a tracker to track benefit payments for child benefits and DLA so I know where I stand and what has been paid.
The problem... its limited and basic an I have to do most things manually, even when I have cell formulas to do some of the legwork.
I stumbled across the term MATCH and SEARCH and I was curious on how to use them for my needs, I was trying to use the LOOKUP set of tools.
My problem...
Benefit rates are set between two date periods, all payment periods are 28 days apart (...but could change to every 7 days) which means that sometimes payments are due 3 weeks of one rate, 1 week of another, the reverse of that or 50:50 depending on the cycle.
A
B
C
[Code]....
The problem should be very evident and especially when I adjust the dates to match what payment dates I finally end up with.
The result of the look up needs to be calculated at the frequency in A14 to B14, A15 to B15 (for example) at the appropriate rate found in D:D when searched for based on the dates in A14 to B14 ... ... etc.
I tried using MATCH to get a match to a date falling between 30/12/2013 and 4/4/2014, I tried this...
=SEARCH(A15,MATCH(B15,A4:F8,1),A15)
which returned #N/A
I have two cells that each contain their own lists (listA=A1, listB=B1). I'm trying to figure out how to say:
If the selection from (listA= X AND listB=W )or the selection from listB=Y output 0, otherwise output data from C1.
Susie:
tootsie-pop 3
oreo box 2
suckers 5
Bob:
tootsie-pop 2
suckers 1
nerds 4
I need to put together a list that shows (in total) how much candy everyone got. Sure, I could concatenate Susie & Bob's (and everone elses) lists, sort, duplicate, put a sum field into the duplicate list and delete repeat names, like...
nerds 4
oreo box 2
suckers 5
suckers 1
tootsie-pop 3
tootsie-pop 2
duplicate, then the second looks like:
nerds 4
oreo box 2
suckers =sum(!Sheet1,B3:B4) [or whatever the proper format looks like)
tootsie-pop =sum(!Sheet1,B5:B6). But what if I have 15,000+ types of "candy"? It would be painful and tedious to put in all those sum fields.
This is almost embarrassing, but I have a simple VLOOKUP function that I can't seem to figure out. On Sheet2 cell A11 is the value I want to look up in Sheet1. Sheet2 B12 is the cell I am entering the VLOOKUP function. The value I want entered is in column 7 of Sheet1. I hope I have explained this enough. My formula entered is =VLOOKUP(A11,Sheet1!$A$9:$A$42,7,FALSE).
For whatever reason this is not working, and I am getting a #REF! error.
If the user selects, annual bill on the calculation type box:
1. Then I need the spreadsheet to use the figure 365 in cell G14.
2. I also need it to times the figure put into G15 by four.
3. It also needs to divide the readings in cells D9,D10,D11 by how many days in cell D7 and them times by 365 and put the answer in E9.
If the user selects bill to date on the calculation type box:
1. I need to copy the figure in D7 to G14.
2. The number in G15 needs to be divded by 90 and times by how many days in cell D7.
I am still new to VBA. I am trying to use VBA to search given rows for percentages above 0.81%. When it finds cells with percentages 0.81 and above it will high light the cell with red.
Here is what I have done so far ...
I work on a sea going vessel and manage an Emergency Response document. My dilemma is automatically assigning a Muster location based upon data entered in a certain column. I'm having a problem figuring out this Nested IF Statement: Column J will either be blank (no entry), "Fire" or "HRC".
If Column J is blank, column A needs to read "STBD". If column J has either "Fire" or "HRC" column A should read "PORT". See attached Excel file for an example with only 3 or 4 rows.
In cell A1:A10 I have various words.
I am trying to convert them to a number assuming every letter = a number in sequence of the alphabet then is summed together. ie:
a=1, b=2, c=3, d=4 ............. z=26.
So the word Excel would equal 5+24+3+5+12 giving me the answer 49.
I have the date of death and the age at death in Years, Month, Days. What formula would I use to figure the date of birth?
View 9 Replies View RelatedI need a single formula that will give me a total figure each day.
I am trying to get a total weight for each days sales
Sheet 1 holds the unique ID and total items sold for each day
Sheet 2 holds the unique ID and the weight of each item.
I have got as far as creating helper cells but this is making the whole sheet way too big. I know there is a more efficient way .....
I've been unable to figure this out for the past few hours so I figure I better turn to.
I need to sum all "orders.price" on sheet 1 when,
1. SaleDate is within the two reference dates(basically monthly)
2. location field in sheet 1 contains the particular string of text
Using the filter function, I've narrowed down that the results of these are not correct at all.
The actual sales are consistent through the months, so each month should have a number in it, yet the worksheet results in almost all of the fields equaling zero.
What's the functions can figure out on the below conditions, For example :
PRODUCTSYEARQTY
AAA 2015 2
ABB 2011 3
AAA 2013 8
BBA 2011 6
AAA 2011 4
BCC 2014 1
Conditions:
1) looking for AAA product
2) sum the qty is before 2014
The answer is :12
I have a column with a number of strings looking like below examples
View 3 Replies View RelatedI have a table that has 3 columns:
Product name (one of 15 products I have)
Purchase Date (converted to excel datevalue).
Week number (a number between 1 and 52)
I'm trying to figure out how to sum the products purchased in a given week.
the formula or Vba code to change the amount in figure to words.
View 1 Replies View RelatedI'm trying to figure out a way to have a series of cells at the top of a spreadsheet that when a button is clicked, the data is sent to the bottom (or next available) open cells at the bottom of a table list. So essentially, a form that sends data to the bottom of a table or list.
I have the margin and I have the sale price. How do I figure out the cost?
View 12 Replies View RelatedI am planning to use a userform to input various figures, and come up with a total.
How do I get the user form to display a figure as currency?
Also, how do I get the user form to display a figure as a date?