Basically I'm doing a excel spreadsheet where i have a range of cells where we can input some figures or amount. If the cells they indicated exceed a certain amt example: 800, i would want it to show an error msg. I know it maybe sound simple, but have been using the if and countif formula which keep on showing error to me.
View 3 Repliesthe formula or Vba code to change the amount in figure to words.
View 1 Replies View RelatedI have an Excel sheet set up with 6 columns: Col A contains a user-entered date.
Cols B-E each contain a drop-down that the user can set to 1 of 4 options.
Col F (I want) to show a date based on Col A & the results of the drop-downs.
The drop-downs contain (in order of importance): "Immediate","Urgent","Routine" and "None". If any of them are set to "Immediate", the date in Col F should be Col A date+2 days, if any set to "Urgent" it should be Col A+14 days, any set to "Routine" it should be Col A+28 days and for None the field can remain empty. I can enter a formula in F2 that checks for B2's drop-down as follows:
I have a list of dates in a column, and am wanting to compare them against today() in cell A1. If any of the dates are in the past, it returns a FALSE, if all of the dates are in the future, it returns a TRUE.
View 7 Replies View RelatedIs there a way of checking for duplicates in a range of cells using one cell only for the code? Return does not have to include what value is a duplicate - only true or false. This opposed to using multiple cell and COUNTIF or a pivot table.
View 5 Replies View RelatedI need to come up with ways to work around this. Say I have a merged area of A1:A*, what I would like to know is how many columns are actually used in this merged area. A1:A4 would return 4, A1:A8 would return 8, A1:C8 would return 8 et cetera. Now I've played a bit with MergeArea.Address and although it returns me the correct range, I'm stuck with actually using it further.
View 5 Replies View RelatedI'm trying to build a formula that counts the amount of cells within a range that contain multiple strings of text within the same cell. I only know how to build a formula that snags cells that contain 1 but not 2 different ones within the same cell. For example: I want to count cells if they have the word BALL and STICK somewhere in the cell....see three cell examples below
gameballnetstick
ballgame
stick ball
tenballs
green stick
Of the three examples: it would only count cells: gameballnetstick and stickball
I've got a spreadsheet with several rows and the numbers within those rows are totalled up at the bottom. Is there a way where i can highlight the cell within the spreadsheet and it takes it off the accumulative total at the bottom? or something similar to this effect? I just don't want to have to remove figures from this spreadsheet and highlighting will be a good way of seeing what has been done
View 1 Replies View RelatedI have the following which does what it says it does.
What I can't figure out is, If the used range Starting in row A5 is greater then or less then A50 not to apply the borders.
.Range("A5:M50").BorderAround Weight:=xlHairline
.Range("A5:M50").Borders(xlInsideVertical).Weight = xlHairline
.Range("A5:M50").Borders(xlInsideHorizontal).Weight = xlHairline
I have a custom email creation template I am merging with another version. The problem I am having is wrapping my head around not only selecting a range that is offset from ActiveCell (column 6-9) but seeing if there is an "x" in that range which is normally blank. My previous attempts identify the "x" but adds the text every time it is found. (Each column is a flag for an email bullet and they can have all four bullets in the email where I only want the text included ONCE if they have ANY bullets included). I use the range because I do not want the text included if none of the bullets are used.
Teh StandHTML then gets used in the body of the email like other HTML items I use
The email is generated using the ActiveCell.Offset to insert special text, emails and routing and has weathered alot of changes over time.
Dim Myrange As Range
Myrange = Range(ActiveCell.Offset(0, 6), ActiveCell.Offset(0, 9)).Select
If Myrange = "x" Then
StandHTML = StandHTML & "Important Text"
End If
I learnt that " " & can combine the text and figure. However, when it comes to a negative numbers, i dont know how to maneouver it. Eg, Cell A1 is USD(50,000.00) and the comment in Cell B1 is Cost is USD(50,000.00). So the function in B1 = "Cost is "& what to put here?
View 3 Replies View Relatedhow can I get excel to show the highest and lowest figures in a range to display in another 2 cells. Can this be done without having to sort the data and remove all of the other rows except highest and lowest. I am using Excel 2003.
View 5 Replies View RelatedI am trying to work out how to select a range from a formula.
One formula works out when a specific number in a list of rows is reached, and returns the number of values it counted before it reached the number.
MATCH(TRUE,INDEX($A$2:$A$50>=B1,0),0)
With the figure returned from that can I then select the range from the first row, to the number of rows counted. And with that selection find the highest number within that range, specifying the highest number as the result?
I am still new to VBA. I am trying to use VBA to search given rows for percentages above 0.81%. When it finds cells with percentages 0.81 and above it will high light the cell with red.
Here is what I have done so far ...
I'm trying to figure out a way to have a series of cells at the top of a spreadsheet that when a button is clicked, the data is sent to the bottom (or next available) open cells at the bottom of a table list. So essentially, a form that sends data to the bottom of a table or list.
I need to have a single cell tell me (either by returning a certain word or colour) if any cell within a range of cells (a)(all within the same column) contain the same text as another cell thats located somewhere within a different range of cells (b)(again within thesame column).
View 2 Replies View RelatedIs there a way where i can have the figures in Red align with the corresponding description.
As it is when i run my report the account code will come on top of the description and i want to find a way to align them in the yellow cells.
All it does is step the cursor down 1 cell from where it starts on the worksheet, rather than sorting through the defined range and then selecting the cell I want. I'm not sure why as I've used almost exactly the same code successfully on a different worksheet in the same workbook:
Dim mycheckrng as Range
myupdatedate = "04/06/2008"
Set mycheckrng = Range("D5:AR5")
For Each c In mycheckrng
If c.Value = myupdatedate Then
c.Select
End If
Next c
mycsdcdateref = ActiveCell
ActiveCell.Offset(1, 0).Select
I want to have C9 populated with a budget type from H1, I1 or J1. How do I create the formula that checks which budget type the value in F9 is?
I am using excel very infrequently.
Screen Shot 2014-05-18 at 12.52.26.jpg
I am trying to check and see if column "A" has a certain number if it does not then keep going and if it does then find wich row in column "A" has that number then in the same row increase column "B" value by 1.
Dim rngPartNumber As Range
Dim Rws As Long
Dim R As Long
Set rngPartNumber = ActiveSheet.Range(Cells(2, 1), Cells(Rows.Count, 1).End(xlUp))
Rws = rngPartNumber.Rows.Count + 1
For R = Rws To 2 Step -1
If Application.WorksheetFunction.CountA(Rows(R)) = compName Then Quantity = Quantity + 1
Next
In our program it is essential that only data is entered for the current week.
I need code that if a date is entered into "cell C1",that it will evaluate this value and compare and assure that it is between the dates in Range D1:E1 (upper and lower values)
If it is between these two dates, nothing happens and you can proceed to enter data.
If it is not message -Invalid date entered. Proceed? If "Yes" nothing happens and you can proceed to enter data! If "No", then the value in cell C1 is set to nothing and allows you to enter the correct date.
I need to be allowed to enter an incorrect date at times,to review and check previous entries, 99% of the time it must be between the start and stop date.
Using Excel 2003 I am trying to write a macro to set the print area according to the amount of data in a particular range of cells. I find I can include this instruction
View 2 Replies View Relatedi need to check a date within a multiple range of dates using certain key.
i've tried vlookup, but failed to get correct answer.
here is Table1
product (cell=A1)
date (cell=B1)
plan(cell=C1)
A
20080801
A
20090801
A
20090901
A
20090831
A
20090101
A
20091101.....................
I am trying to build a user form to find out the customers who purchase more than $1,000 during a certain period. The userform has two inputs:
One is to select the data range of customer information. Assume all customer information are in the cell A2: H10, how shall I write the error checking code if the user selects the range which is out of (A2:H10)? message box would be " You selection include invalid data, please check"..
The other input is called " Get data past this data", and I can enter a date in the following cell ( txtDate). Regarding the error checking, I am thinking to use IsDate() function to make sure it is a valid date. Will be there be any other error checking you will recommend?
I have a standard table with quite a few rows. Columns I have are :
Text | Lower number | Higher number
What I would like to do is, in another worksheet, enter a number and I'd like to go through the table and if the entered number is in the range of the Lower and Higher number columns, have the Text displayed.
Using Index Match I can do this if the number matches Lower or Higher number but not if it's between them.
how to check that the formula in the cell1,cell2,cell3 in first row is same in next rows.For example how to check that formula's in c2,d2,e2 is same as c1,d1,e1 and c3,d3,e3 is also same as c1,d1,e1.
View 9 Replies View RelatedI want to create a nested IF formula that checks for blanks in three cells.
If A1=Not blank, then enter in "Live"
else
If B1=Not blank, then enter "Signed"
else
If C1=Not blank, then enter "Interested"
else
enter blank into cell
I am having trouble with several IF..THEN..ELSE loops in my code, all of which are pritty much the same. I need to find rows that are formatted in a certain way, in the example below this is a clear background and Black text. I know the loop works because i have tested it without colours on a test workbook, and i know the colours are correct, but it keeps skipping over the condition, regardless of the outcome. All the variables shown are declared correctly before the loop is entered.
View 2 Replies View RelatedI would like to check if selected cells is a union of several ranges or one solid range. I am sure there is a way, but did not manage to find it. How to do it?
View 2 Replies View RelatedI need a formula to calculate the amount due based on cumulative sales once a breakpoint amount is reached.
Example:
Breakpoint:
cum sales are > 500 pay at 3%
cum sales are >1,000 pay at 2%
month/ sales/ cumul sales/ amount due
jan/ 100.00/ 100.00/ 0
feb/ 600.00/ 700.00/ 6.00
mar/ 600.00/ 1,300.00/ 18.00
and so on...until the end of year.
I tried using an if formula by could not get it to work.