I am planning to use a userform to input various figures, and come up with a total.
How do I get the user form to display a figure as currency?
Also, how do I get the user form to display a figure as a date?
This is the user form:
Dibujo.JPG
All the labels and cells in the original file are in dollars.
When I send it to some computers it changes to euros, like so:
Dibujo 2.JPG
I created the file in Excel 2003, and it changes to euros in both Excel 2003 and 2007.
Step by step process to format back to dollars?
When I enter a number, say 2456 in this textbox why does it display "$2.45" instead of "$2,456". I've tried fiddling with the ###'s and .'s but it just gets worse.
[Code] ....
What I am trying to do is display my output in currency format. The catch is that the values I am using are not from cells, they are from text boxes that are locked on a user form. The first text box is a base rate with a value of "$2000.00". Second comes a quantity text box with an integer value of let's say "3". Last comes a markup rate which is a text box with a rate of ".10". The calculation is fine, it although it returns "$6600" when it is critical that I display the two decimal places at the end. Here is my code for the calculation:
Me.txtAirfare.Text = "$" & frmAirfare.txtBaseRate.Value * frmAirfare.txtQuantity.Value * (1 + frmAirfare.txtMarkup.Value)
I have a userform that one textbox takes it's value from a cell in sheet3.(k2). The format of this cell is currency. How the textbox takes the same format as the cell?
In the same userform i have a series(prcase1,prcase2..) of textboxes that i want to have currency format as the user type numbers on these.
How can i do this?
I have a UserForm with a ComboBox for the currency (30-35 items) and a TextBox for the amount.
The currency codes are displayed like this: EUR, USD, RUB, GBP etc.
How do I paste the result of TextBox in a selected currency format in a cell in worksheet?
Example:
ComboBox value is "USD"
TextBoxValue is "500"
Cell A1 value should read "500 USD" as currency not text.
I have a userform that should open a file and then figure out if a integer meets a condition. All this works.
My problem is that i want to run another sub from this userform after the file is open(this will be the active file).
I have a userform where the user enters prices for up to 12 items in textbox controls, and these prices are stored in an array. The textboxes are titled tbPrice1, tbPrice2, etc. I'm having an issue with the line of code I am using to store the values in an array. Every time I attempt to store them, I get runtime error 13 type mismatch, but I don't understand why.
dim PartPrices(1 to 12) as Currency
For x = 1 to 12PartPrices(x) = IIf(Trim(Me.Controls("tbPrice" & x).Value) & vbNullString = vbNullString, CCur(0), CCur(Trim(Me.Controls("tbPrice" & x).Value)))Next
A little more explanation here. Not all 12 parts will have prices, so I use the IIf statement to store the value 0 whenever the user has left a price field blank. I use trim in case they leave spaces in the price textbox or something. When the field is not blank, I take the value entered in the textbox, convert it to currency and attempt to store it in the relevant element of the array.
I have options buttons in a userform, first is "$" the other is "€"
When somebody chooses one of them, it writes the choice to a cell in the data sheet. But when clicked on the next userform I want some of the texts automatically change the currency depending on the choice made in the previous userform.
The formula below was is example
=""&Data!$A$2&" / m³"
=""&Data!$A$2&" / kWh"
How to make EXCEL 2007 Automatically convert all my CURRENCY symbols in all cells formatted for CURRENCY in THE SAME SHEET to the one and ONLY currency selected in JUST ONE cell ? (i mean, after conversion, all of them are Not just display currency symbols, but Calculable monetary values like regular Excel's built-in currency format)
I am a dummy in VBA so I really am not familiar at all if the solution is really one of VBA. I don't even know how to start programming VBA at all in Excel.
I've got a spreadsheet with several rows and the numbers within those rows are totalled up at the bottom. Is there a way where i can highlight the cell within the spreadsheet and it takes it off the accumulative total at the bottom? or something similar to this effect? I just don't want to have to remove figures from this spreadsheet and highlighting will be a good way of seeing what has been done
View 1 Replies View RelatedI have several rows which lists different currencies - USD, GBP, EURO, JPY etc.,
A1 usd 5000
A2 GBP 7000
A3 USD 3400
A4 EUR 12000
A5 JPY 89000
A6 EUR 1000
At the bottom I want to show the total of each currency separtely.
I learnt that " " & can combine the text and figure. However, when it comes to a negative numbers, i dont know how to maneouver it. Eg, Cell A1 is USD(50,000.00) and the comment in Cell B1 is Cost is USD(50,000.00). So the function in B1 = "Cost is "& what to put here?
View 3 Replies View RelatedIn a sheet I am showing a calendar where a user can choose Day, Month, Year and if he/she presses enter the data is submitted in Sheet 3. This is working fine for me.
In this sheet ( Sheet3) I have the column headings as Day, Month, Year, Date and Submitted By.
Now in the user form I have a command button as Show data (User form Name CmdShow) and Text Box (User Form Name TxtDateLeave) . which I want is that when someone will click on Show data text box will show the data last row value of column D from sheet. Column D of sheet 3 may be Date or Text format.
I have written code for that
Private Sub CmdShow_Click()
With Thisworkbook.Worksheets("Sheet3")
Me.TxtDateLeave.text = .Cells(.UsedRange.Rows.Count, 4).Value
End with
end sub
But this is not working. is there any other way?
trying to incorporate userforms into my spreadsheets.
At the simplest level, I create a form and display it using userform1.show.
However, I've noticed from some tutorials that the " proper" way to do it is to create an instance of the form before trying to do anything with it i.e.
Dim frm As New userform1
frm.show
way to initialise a userform? Is there a pratical difference between the two syntaxs or in reality does it achieve the same goal?
Is there something special that I *should* do in the initialise event to allocate memory for the form?
Is it possible to display a Pdf file on a Userform or in a textbox etc. on said form?
View 9 Replies View RelatedHere to ask for a simple code on how can i display information on a user form once entered from an input box.
Example
A B C
1 E12858 Jorge Stregan
2 E112859 Rose Ann
Result:
Display all data in a row in userform once any data in A1 entered in input box.
I have a userform that simply filters data on a spreadsheet through checkboxes. The form is filtering columns (B through N) to shorten the list of possible outcomes (data in column A.) After the user is done with the form I'd like to populate the data in column A (the results from filtering and there is no way to pre-determine how many rows will have data) with the user pressing a button on the form, into something the user can see without going back to the spreadshet. I was thinking I could populate the results into some field on the form; maybe a list box, txt file, using the camera function in Excel?
View 2 Replies View RelatedI have a code that generates a URL for an image (on the internet, not on the local machine) and I would like that picture to be displayed within a userform (preferably at it's original resolution).
View 5 Replies View RelatedI would like to have a graph to pulled on to a userform for display purpose.
I would like to hava a VBA macro to do this operation for a command click event.
Currently, I have 3 charts which were created from data in the spreadsheet. I would like to have all 3 charts put on a userform for the users to view all at once. I would like this to appear once they click on the command button "View Capacity Charts" on the "Core Products" sheet.
I included in VBA a Userform1 with three Images, but I am not sure if that is the right way to go about....
The code I'm trying to execute is given below
Public Sub datafill()
Sheets("Bloomberg Data and Formula").Activate
' Creates prompt to input date to be checked
Dim InputAnswer As Date
InputAnswer = InputBox( _
prompt:="Enter NAV date for verification against Bloomberg in the format DD/MM/YYYY", _
Title:="Date Input Screen", _
Default:="DD/MM/YYY")
Range("C1").Value = InputAnswer
' Clear out previous day's data
Range("A6 : Z6").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.ClearContents
Range("A6").Select
Private Sub UserForm_Initialize()
'ReviewFormlabel.Caption = "This is a Test" 'this line WILL display on the form
ReviewFormlabel.Caption = Sheets("Punches"). Range("A1:G17") 'I get a type mismatch error 13 here
End Sub
What I am trying to do is, display the worksheet data on a user form. This is for display only. The user will NOT be able to change any of the data.
is there anyway to add a sport ticker to the bottom of a excel vb form? squills Auto Merged Post Until 24 Hrs Passes;i seen a really nice one by espn called bottomline. anyway to have that run in the vb form?
View 6 Replies View RelatedI have below code for dısplaying ımages on userform and ıt Works fıne how ever ı have more then 1 Picture to show so how can ı unload the pıcture and Show the second one and so on
[Code] .....
End sub
anyone know how to display data using label on userform? I tried using offset but it doesnt work. The data I want to display is in column G. How do i go about that?
View 13 Replies View RelatedDepending on the result of a formula in R67, one of three things will occur. If the result is a 1, UserForm1 is displayed. If the result is a 2, UserForm2 is displayed. If it is nothing, nothing happens. Ok, I can do that.
However, with the code below, whenever I select any cell, and there is a 1 or a 2 in R67, the userform pops up. I only want it to pop up if I change a value in C6 which in turn changes the result of the formula in R67.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("R67").Value = 1 Then
Run "UserForm1"
End If
If Range("R67").Value = 2 Then
Run "Userform2"
[Code] .......
I've tried setting a monitored range. I've tried the code below in one form or another and it didn't work.
Code:
If Not Intersect(Target, Range("C6, R67")) Is Nothing Then Macro
I've put together a workbook that has 2 sheets that contain stock details and location info (i.e. part number, description, Location & stock level). I need to have a search function outside of the 'built-in' Ctrl+F (or Edit > Find) search function, i'd assume this would mean using VBA?I invisiage making a userform embedded within the very first sheet of the workbook and having this form be opened when accessing the worbook - maybe hide the other two sheets containing the data? Within the search userform, i would have a 'part number' & 'description' search input boxes for data input, either one could be blank but atleast ONE must be inputfor the search to work. On pressing the 'Search now' command button in the userform, any reults found would be displayed in a listbox at the bottom of the said userform. If no results found, a dialog box would pop-up saying 'No Items Matched"
View 7 Replies View RelatedA particular textbox in myuserform requires a displayed format of 000.000. I would like the user to enter a no less, and no more, than 6 digits. On tab, the textbox displays that value in the preferred format.
eg. enter 123456, TAB, results in textbox display of 123.456
I have tried ...
Code:
[Private Sub freq_AfterUpdate()
freq = Format(freq, "000.000")
End Sub
But this results in 123456.000
how to go about displaying data from seperate columns onto an userform. The optimal objective is for me to use multiple command buttons to display each individual column's data onto the userform.
View 2 Replies View Related
