Format Certain Cells To Change Colors Depending On Date
Feb 27, 2013
I am trying to format certain cells to change colors depending on the date and the content of the next field to show due dates.
cell label
due date
date completed
c5
au5
be5
c6
au6
be6
c7
au7
be7
c8
au8
be8
What I need is for the contents of au5 to be green up until 10 days before the due date, yellow up until 5 days, and red with less than 5 days until the due date. If the date completed is entered into be5, then the contents of au5 should be black.
Is this possible, and if it is, how do I set this up? I tried to use
=$AU5-TODAY()>=10
And choose green formatting (something I found on yahoo answers), but when I enter the date the text is still the original black font.
I have a few buttons on my page that I would like to change colors depending on the value in cell AI1. Right now this is the code I have:
[Code] .......
What I would like is to add formatting for "rounded rectangle 4" as well. if the cell = 1, number 4 changes color, if the cell = 2 both change color, and if the cell =3 then only 5 changes color.
I need change the color of the cell depending on the following conditions. (By the way the column will have names list)
1. single punctuations are allowed anywhere in name apart from first position.-->color should not change 2. If any name got consecutive punctuations --> color should change to RED. 3. Any punctuations apart from Dot(.), hyphen(-), apostrophe('), Space( ) are not allowed-->color should change to RED.
How do I go about formatting selected cells for different colors for each different number in the selected cells? If I have numbers scattered about I want the cell to show a different color depending on the number that is inserted. EG: 115=red, 365=blue.
I have a spreadsheet that I enter monthly expenditure on.
Column A is expenditure during 24th to 31st Column D is expenditure during 1st to 8th Column G is expenditure during 9th to 16th and Column J is expenditure during 17th to 23rd
Ive been trying to colour the columns grey if todays date is outside the above date ranges each time I open the spreadsheet so its obvious which column my expenditure needs to be entered into.
I want to be able to do the following: I have data in column a and I want the text to change to strikethrough in, for instance, cell a1 when data is entered in b1.
I am wanting the colors of the bars in a stacked chart to change based on the date in the X Axis. As the current date arrives, the stacked bar needs to change to various blue shades. If the date is in the future, the stacked bar needs to be various grey shades.
I have an if statement which shows either GP% or average revenue per product. The problem is that GP% needs to be in a percentage format and revenue per product needs to be in number format. 500 is now shown as 50000% or 50% will be shown as 0.5 for example. Is there anyway on changing the format of a cell based on the number?
I'm trying to get a range of cells to change colors. This should happen from VBA code and happen on specified sheet that is not the default sheet when the userform appears that has the button that triggers the event. I have to reference the range with variables because it changes depending on other events.
I have a graph which displays information from a vlookup.. The vlookup can bring either numbers which are in percentages format or ordinary number format.
The question I have is is it possible for the graph to automatically change format depending upon the information who is looked up..
I have a budget worksheet that uses a spending forecast sheet to determine where the spending level for each budget code should be to the end of the current month. In other words, the Forecasted YTD To Month End fomula for each budget code in the budget worksheet is simply:
=SUM(Forecast!D8:F8)
Where column D is Jan, E is Feb, F is Mar etc in the forecast which distributes the budgeted amounts by month.
In each row on the budget sheet I want to evaluate today's date and if we're in March I want the formula to read as above but when we move to April I want it to use G as the end column in the range to sum.
SUMIF seems cumbersome in this circumstance and I wonder if a UDF might suit better.
The spreadsheet attached is a timesheet I use. The last column on the sheet (IV) keeps a running total of time spent on each project. I need a way that i can find out how much time was spent on projects in specific timeframes (eg 01/01/09 - 07/01/01, or 01/01/09 - 31/01/09). my initial thought is perhaps i can have a "from" cell and a "to" cell to input the dates i require and it will total the relevant cells in the rows below.
NOTE! This workbook uses VBA to auto hide any column which are dates previous to today's date so you may need to unhide them to view times logged.
I have a table of data (total 142 rows). Column contains dates, in the format dd-mmm-yyyy.
I tried to filter using DATE FILTERS->EQUALS and in the custom filter window, I chose EQUALS then picked a date from the date picker icon. The date I picked was 5/4/2009 (this is May 4, 2009, formatted automaticall by excel as m/d/yyyy).
When I clicked OK, nothing showed up despite the fact that there are 6 occurences of May 4, 2009 (formatted as dd-mmm-yyyy in the data table)
So my questions are:
1. Is this due to the formatting?
2. Is there a way to change the date format supplied by the date picker?
I have two columns where there are dates (e.g. 11/05/2009) in a date format; I would like to change the format to `general`; but without losing the original values, i.e. I still want to see 11/05/2009, but just in `general`format. Is it possible to create a macro that will do that? I want these values to stay in the same place, i.e. if it is in cell K10, I still want to have it there - just in other format.
I have an excel sheet full of dates in text format and want to convert them into regular format. For instance, one of the dates listed is in text as "60801". I'd like it to show in regular date format of mm/dd/yyyy, so that 60801 becomes 8/1/2006.
I want to colour 10 cells (A1-J1) if I type in yes in cell K1. Using conditional formatting Im only able to colour 1 cell. Is this possible without using VBA?
How to a change a cell colour to say red in B6 if cell b12 = 1 and if e6 = 1 to change to green. I thought I might be able to use conditional formatiing but no. I had set the spread sheet to do a cell just for a condition representing a sum from another worksheet and it was working fine but i have to incorporate the two together and am stock.
I have column "C", starting from "C5" with dates till C200, but not all cells have dates some of them are also blank.
I want the cell to change color depending on the date.
If the written due date is in a month from today, I want it to turn yellow, and if the due date is in the past from today, I wanted to turn red. I want it to get updated every month.
I have txtboxes in which I write date in format dd/mm/yyyy but if I want to put date in cell correctly from this textbox in need to declare event on exit -change format to mm/dd/yyyy and then it puts date in desired format which is dd/mm/yyyy and my regional settings are English(uk)
Is there a way to put any date format in textbox and in cell there will always be format dd/mm/yyyy or at least if date is entered in format dd/mm/yyyy that also in cell the same format is putted
This is a project plan with tasks and dates. Column A is the activity number. (Example 1, 2, 3" etc). Column B is the task (Ex. "Complete Report"). Column C is number of days required to complete the task. Column D is the dependency column. (Ex. Cell D2 =1 in other words Task 2 is dependent on task 1). Column E is the date.
I would like to have a seperate start date cell and a go live date cell.
The objective is to enter a start date, and have each column E date increase based on the number of days entered in Column C. If a task is dependent on another and I change the number of days in Column C I need the dependent task to change the same amount of days.
when I do Format Cell, the date formats offered use US formats like 20/02/1999. Why does it do this, and can I fix it? I suspect that this the root of the following problem.
I have a button on a userform to enter today's date into a textbox. It enters it as 05/27/2009. The wrong format. I save the data to the worksheet, then use the data form to go to the next record, then back. The date then appears in the correct format as 27/05/2009.
Another related problem: if I enter a date manually into the textbox on the dataform, such as 2/3/2008, it interprets it as Feb. 3, and when I save it to the worksheet, and then use the form to view it, it comes out as 3/2/2008.
In column M, i have a long series of times (times of day) which are currently formatted as "1654", "1021", "1628", etc. In column AI, i need to reformat those dates to look like: "00:00:00.000"
What would the formula to accomplish that look like?
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1 B1 C1 D1 E1
Inspection Date Weeekly Due Bi-WeeklyDue Monthly Due 6 Monthly Due
January 1 2013 Change red Jan 8 & return blank Jan 10 Change red Jan 15 & return blank Jan 17 Change red Feb 1 & return blank Feb 3 Change red June 1 & return blank June 3
