Here is an example list:
Networks
Hardware
Networks
Software
Networks
Resources
Apps
Hardware
Apps
Software
Apps
Resources
Domain
Hardware
Domain
Software
Domain
Resources
Print
Hardware
Print
Print
All I'm trying to do in the second column is something that can say if there is a change in column A, then restart the order, or not..
I have used the below code to insert a new row when the value in coulmn A change. I now need to evolve it so that the new row will contain a specific value depending on the changing value:
Before:
Column A Column B
one test
one test
two test
two test
three test
three test
After:
Column A Column B
one test
one test
Coz two............................
I am trying to find a solution for highlighting cells in a column that are repeats, ie. >3. I also need these cells to only be highlighted if the adjacent cell in the next column contains specific text. I have tried using conditional formatting with a countifs formula to no avail.
View 2 Replies View RelatedI have a spreadsheet with names and start / finish dates columns down the left hand side then a row of week commencing dates along the top.
for each name row I would like to change teh fill colour of a cell to green to represent the week in which they started and to red for the week in which they finished. I therefore need to cross reference the start and finish dates for each name with the relevant week commencing dates at the top. Somehow! I presume there is some kind of vlookup type formula that I need to use in conditional formatting, but I am not sure what.
when I execute this code on the selected cells, it completely ignores my selection, and makes the entire worksheet black.
Sub ColorCells()
Dim cell As Range
For Each cell In Selection
If cell.Value = "U" Then
cells.Interior.Color = 3
I would like to repeat a formula and make its dynamic depending on the request.
The formular that I would like to repeat is:
=IF(ISERROR(INDEX(Data!$A$2:$G$14997,SMALL(IF(Data!$A$2:$A$14997=$D$2,ROW(Data!$A$2:$A$14997)),ROW(985:985))-1,3)),"",INDEX(Data!$A$2:$G$14997,SMALL(IF(Data!$A$2:$A$14997=$D$2,ROW(Data!$A$2:$A$14997)),ROW(985:985))-1,3))
How to a change a cell colour to say red in B6 if cell b12 = 1 and if e6 = 1 to change to green. I thought I might be able to use conditional formatiing but no. I had set the spread sheet to do a cell just for a condition representing a sum from another worksheet and it was working fine but i have to incorporate the two together and am stock.
I have attached a spread sheet.
i need to change the colour of 4 cells depending on the one cell.
i have found some vba codes on the net but they are all based on numbers and i need it on text.
so if a1 ="alert" make A1 to A4 red
if a1="passed" make a1 to a4 green... and so on
i cant used conitional formatting as i need more than 3 colours
I have column "C", starting from "C5" with dates till C200, but not all cells have dates some of them are also blank.
I want the cell to change color depending on the date.
If the written due date is in a month from today, I want it to turn yellow, and if the due date is in the past from today, I wanted to turn red. I want it to get updated every month.
I am trying to format certain cells to change colors depending on the date and the content of the next field to show due dates.
cell label
due date
date completed
c5
au5
be5
c6
au6
be6
c7
au7
be7
c8
au8
be8
What I need is for the contents of au5 to be green up until 10 days before the due date, yellow up until 5 days, and red with less than 5 days until the due date. If the date completed is entered into be5, then the contents of au5 should be black.
Is this possible, and if it is, how do I set this up? I tried to use
=$AU5-TODAY()>=10
And choose green formatting (something I found on yahoo answers), but when I enter the date the text is still the original black font.
I want to create a macro that make the somme of 2 other columns when the nummer of the first column ist double(more than one ) and put the somme in a new Rows. like this :
A B
23 5
23 12
23 2
45 4
45 1
46 3 in the news the resultat in the same columns itīs like this
A B
23 19
45 5
46 3
I need change the color of the cell depending on the following conditions. (By the way the column will have names list)
1. single punctuations are allowed anywhere in name apart from first position.-->color should not change
2. If any name got consecutive punctuations --> color should change to RED.
3. Any punctuations apart from Dot(.), hyphen(-), apostrophe('), Space( ) are not allowed-->color should change to RED.
Example-
ShivakumaraNo Change
Shiva kumaraNo Change
Shiva'kumaraNo Change
shiva.kumaraNo Change
shiva kumarared
shiva''kumarared
shiva' kumarared
shiva. Kumarared
shiva.'kumarared
shiva:kumarared
I would like to search Column C for an instance of the text "Std. Residual", then cycle through the non blank cells to the right and run some formatting code:
VB:
'this line will be modified so that i cycle through the non blank cells that i have found
For row_cycle = 1 To 7
'not signifcant
If Abs(ActiveCell) < 1.96 Then
Selection.Interior.Color = 255
[Code] .....
I then want to search for the next instance of "Std. Residual" in Column C, do the same again, and so on for the entire Worksheet.
I have a spreadsheet with several freeforms. I would like them to change backgroundcolour, if the content in a cell is equal to another cell.
Basically I would like my shape "Freeform1" to change backgroundcolour to RGB (0, 180, 0) if Sheet1.Range ("A1") = Sheet2.Range("D3").
If it's not the same content in both cells, I would like the freeform to remain unchanged, that's RGB (79, 129, 189).
This should happend automaticly, so I don't have to click the shape to make it happen.
I have a download from an accounting general ledger which has the following:
Column A: Category Description
Column B: Country
Column C: Department
Row 1: Months
Note: Each row contains the last 12 months worth of costs
As the categories/criteria can appear multiple times, and there are thousands of lines, I have been using SUMIFS to calculate totals my required combinations (eg. Travel expense, Germany, Sales department)
Every month, the information refreshes to show the most recent 12 months worth of data. And this means I need to manually update my formulas to correct the month column headings, as everything moves by 1 month.
Would something like a SUMIF with a SUMPRODUCT work? Eg. if current month = July, then it would sum everything from the July column automatically?
I want to format 3 columns in excel depending on certain value from another column.
By example: I have the columns A B C completed with some text. On the column D it will be the numbers 0 or 1. If the number is 0 the background color from A,B,C columns shall be Green, if the number is 1 the color shall be red.
I have tried in conditional formatting with the formula =$D$1=0 but the color of the columns are changing only depending on the value from cell D1. I don't know what is the correct formula. For column A1 I want to check the value from D1, A2 - D2, A3 - D3,...,An - Dn.
I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
I have a worksheet which contains 2 columns which is needed to work my problem.
Unique Work ID and Description
The unique work ID are the same for each description, but there are up to 5 different description associated with each unique work id.
I'm looking for an automated process but where to start to convert the 5 rows in the unique row and 5 column for the descriptions
In a macro I want to automatically insert a formula in several cells. The formula depends on other cells, and I want to be able to manipulate these cells with variables. Here is my code:
[Code] .....
All my variables are declared:
Sheets("DATOS YTD 2014").Cells(I, Semana + 1) is the cell I want to be able to chose due to the variables
Sheets("DATOS YTD 2014").Cells(I, 3) is the reference cell for the VLOOKUP formula, that will vary with I
SheetMonth.Range("B3:W172") is a range in the sheet SheetMonth which is fixed
The error message I receive is the following: "Run-time error 13, Type mismatch"
I precise that the next step is to make the ",6," part in the vlookup formula also variable... but I guess once my current issue is solved this one will be a piece of cake.
In MS-Excel 2007 dates seem to be limited to YYYY/MM/DD style, which I imagine there is a way to alter it into MM/DD/YYYY. I looked into MS Help, and a google search, and either I was using wrong keywords, or not, but I couldn't find anything to simply change date arrangement. If I am being unclear, I am talking about the function '=DATE(YYYY/MM/DD)' is what I want to change.
After I get that fixed, I need there to be a function to reproduce a 3-day work week (Mon, Tue, and Thur). e.g.:
10/05/09 [data] [data] [data]
10/06/09 [data] [data] [data]
10/08/09 [data] [data] [data]
Week 1 [data sum] [data sum] [data sum]
10/12/09
10/13/09
10/15/09
Week 2
10/19/09
10/20/09
10/22/09
............................
I do have some other coding background. I am working on some VBA script to run against data being put into a single excel sheet. Column C will always have data, but column D will not. What I need to do is loop through each row with something like this:
Staring at row 2 (since row 1 is a header in this report)
If Column D is not blank, then subtract D from C.
Repeat for next row until the end of the data
I have a formula that is working, but I want to repeat it every seven columns. I know I can drag it and release it (or drag a few and release them in the appropriate column), but at this point I have so many columns that it's quite cumbersome to do that. Is it possible to create a macro that will automatically repeat the formula in every cell seven columns to the right (the same row for all)?
My formula is in cell K7 is:
=IF(AND(K24<=0%,K24>=-2%,OR(J32="T",J32="F")),1,"FALSE")
Now I want that formula to repeat (with the proper adjustments) for cell R7, i.e.:
=IF(AND(R24<=0%,R24>=-2%,OR(Q32="T",Q32="F")),1,"FALSE")
and then to automatically continue like that for cells Y7, AF7, AM7, and so on.
I've recorded a macro which selects a few cells in a row, copies them and pastes them again over the same cells (special paste - only values), and I've attached this macro to a button.
I would like the macro to repeat the same action on the next row for the same columns, each time the button clicked.
How to update the macro to move to the next row each time initiated?
My F4 key (which I use constantly) works for every "repeat" function except for inserting rows or columns. I can repeat every other option EXCEPT inserting rows/columns. I just had Office 2007 uninstalled and had Office 2003 put back on my PC. My IT group can't figure it out.
View 3 Replies View Relatedmacro for an Excel 2007 file. It has to be a macro. I have cells in two columns I need to look at. Column A will have a value of cat, dog, or mouse. Column B will have a date. If A2="mouse" AND B2<"1/1/2013" Then A2="" ElseIf A2=mouse" AND B2>="1/1/2013" Then A2="mouse". I don't need anything to happen if A2 is equal to cat or dog. The macro has to move down the entire A and B column: A3/B3, A4/B4, and so on until the end of the columns. Hope this makes sense. I've tried a few macro samples I found online but they don't quite fit what I need done, or I don't know how to modify it.
View 2 Replies View RelatedI'm working on right now is a spreadsheet where we catalog and monitor account information for a handful of groups. I have several different worksheets that contain grouped information such as all groups we have and a list of individual people in those groups. Those groups are in a single column going down and the people are in a single row for that group going from left to right, an example is below:
Master Personnel Listing for Accounts
-------------------------------------------------
Group 1 | Name 1 | Name 2 | Name 3
Group 2 | Name 1 | Name 2
Group 3 | Name 1
Group 4 | Name 1 | Name 2 | Name 3 | Name 4....................
I want to Autofill a Column C to repeat a set of data in Column A, if Column B contains an integer, as shown below. Being able to Autofill this data allows me to have a dynamic table for use on multiple projects that may have a different amount of rows in Column B.
Outflow % Table
25
50
[Code]......
I need for it do perform the same action on multiple rows/ cells of data. What adjustment to the code needs to be performed to do so?
Sub fconcat()
Range("C1").Value = Range("A1").Value & Range("B1").Value
For i = 1 To Range("A1").Characters.Count
Range("C1").Characters(i, 1).Font.Name = Range("A1").Characters(i, 1).Font.Name
Next
For i = 1 To Range("B1").Characters.Count
Range("C1").Characters(Range("A1").Characters.Count + i, 1).Font.Name = Range("B1").Characters(i, 1).Font.Name
Next
End Sub
I want formula which can automatically populate the amount based on the number of months starting from the date vehicle is received. For Eg.
Nissan patrol Rent is AED 5800/- per month & we deliver it on month Sept 2011 for 24 months then i want excel to automatically populate AED 5800/- for next 24 months starting from Sept 2011.
I am looking for a formula to repeat a given set of values, a certain number of times ...
See attached for visual explanation ...
