I have a range which has conditional formats based on other cells. I want to copy this range into another sheet and retain the current formats as fixed formats without copying the conditional formulae. ideally in VBA.
View 5 Replies
I have a Sheet ( Named "Summary" for Example ) of about 4,000 Rows that has a LOT of Conditional Formatting.
I Added Another 100 Rows this Morning and when I Tried Saving it a Message Saying that Not All the Formatting for the New Data that had Been Added had Been Saved. Is there a Macro or Something I can Run that will Make the Conditionally Formatted Cells Stay the Colour that they are but Delete the Conditional Formatting Part of it Achieved Using "Format" & "Conditional Format" from the Menu Please.
Ideally I would like to be Able to Enter the Number of Rows ( From Row ? to Row ? ) that I want this to Apply to.
How do I format numbers so it will show the actual first digit, and the rest as x?
so that $1,234.56
will appear as $1,xxx.xx
or alternatively,
$1,234,567.89
will appear as $1,xxx,xxx.xx
I would prefer to do this with custom formatting rather than VBA,
(this is so I can generate sample reports for prospective clients, without showing the real numbers in the tables)
I have been trying to set up this macro to copy and paste rows where a tick box is checked. The macro needs to transfer the row A:H over to sheet 2 then insent the data acording to property title either A, B, C etc. into formated tables which then feed into a bar and pie chart. I have tried posting this question up in sections hoping that i could get the bits of code i need and then work out how to do the macro but I have had no luck since my VBA skills are poor. I have attached the file
Private Sub CommandButton1_Click()
Dim lRow As Long, lRow1 As Long, lRow2 As Long
Dim Target As Range
Dim vTemp As Variant
Dim WS2 As Worksheet
Set WS2 = Sheets("Sheet2")
lRow = WS2.UsedRange.Row + WS2.UsedRange.Rows.Count
For Each Target In Range("I1", Cells(Rows.Count, "I").End(xlUp).Address).SpecialCells(xlCellTypeConstants)
vTemp = Target.Value
If VarType(vTemp) = vbBoolean Then
If vTemp = True Then
vTemp = "*"
On Error Resume Next
vTemp = WorksheetFunction.Match(" Total*", Range("A" & Target.Row, "A" & Rows.Count), 0).....................
I wonder how to copy a conditional format from one cell to its current row.
I've attached an example (if B3 is green then I'd like its whole row turns green too).
I think there should be an "easy" way to turn the whole rows green, red or whatever color based on the B column formats (or colors)..........
I conditionally formated a spreadsheet to delete all repeats. Now I have my rows numbered 1, 2, 3, 4, 9 15, 20, 26, 36 (no specific order because the number of repeats were random). I inserted a new column (A) and want a running set of numbers (1,2,3,4) starting at A4. The only problem is that when I put a 1 in the A4 box and try to drag down in the bottom right corner of the cell with CTL+Click, it copies the number 1 all of the way down. What do I do?
I have this code that copy/pastes a range from another sheet for every nth row. In the code I have pasted cells I need to merge the cell with the cell to the right and format it. I thought I was doing ok but the code keeps returning an error (run-time 1004) and I don't know the solution, it is beyond my level of VBA.
Code:
Sub test()
Dim ws1 As Worksheet
Dim ws2 As Worksheet
Dim lngRowCounter As Long
Dim newRowCounter As Long
[Code] ...
The code in red is the problem and I have commented it out so it can run, but I need it to merge and format. I don't know how to address range/cells in column B and C together (they are the two cells I wish to merge and format).
the date I want to copy paste is in [dd/mm/yyyy] format in a single cell.
I want to isolate the [dd], [mm] and [yyyy] and write them down in 3 different cells. How can I do this?
I have a range of cells that is 10 rows high. I want to copy and paste this range 11 times while identifying each of the 11 copies of the range, such as; 02,03,04...12.
Please see attachment for an example of what I am trying to do.
Does anyone have an idea of how this might be done in VB?
Is it possible to have a macro copy a range of cells (A1:K1) and place it in the next empty row? My first row has formulas in it to grab information from a separate sheet within the same workbook with special formatting so I can import it to another program. What I want to be able to do is take that first row, use my macro button to copy and paste (only text, not the formulas) the information into row 2, then when the information changes in row 1 with new information (from the other sheet) it will copy and paste the new information into row 3 and so on.
View 6 Replies View RelatedI have a drop down list in one column which I have formatted to change colour when chosen. What I want to do is to copy the colour on the other two columns beside it when it change. I manged to do one row by adding a new rule using "use a formulat to determine which cells to format" with the formula =$D$29="Awaiting Approval" (This is just one option on the list.)
Now my problem is how I am going to copy the same format to other rows without doing it one bye one or manually i.e. changing $D$29 to $D$30 I did the format painter but it does not reflect the lists on their respective rows/list/cell.
I want the same affect as copy a table and pasting into the email. So i guess i need to copy a range and save as html in a string. It seems like it would be simple since its just copy and paste into the email, but i've been unable to find anyting on it.
View 3 Replies View RelatedI'm exporting a csv file from a membership database with the attendance of members. With a macro i open the file and copy the contend to excel. With the macro the column for the date has *randomly* wrong formats. Example the date in column B:
Aasia Tallah19-03-2009 19:33
Aasia Tallah17/03/09 7:49 pm
Aasia Tallah15/03/09 7:53 pm
Aasia Tallah14/03/09 6:34 pm
Aasia Tallah03-12-2009 20:05
Aasia Tallah03-11-2009 19:56
Aasia Tallah03-10-2009 19:54
I try to change the format of the column, but that does not work. Rows 2,3 and 4 seem to be text but they are not. If i access the edit bar for example the 17th of march and store without changing anything, it changes to the format of the first row. That is how i want it. If i copy the column by hand, every thing is fine.
All of the following i tryed:
- format date column of the csv before copying... failed
- copy special with only pasting values... failed
- preformat the column i paste the date to... failed
- delete the sheet i paste to and create a new one... failed
- copy the macro to a new workbook... failed
I have a spreadsheet whereby in each cell of a row there may be a formula or/& conditional statement applicable. I would like to create a macro that can perform the insert of the new row as well copy down from cell above applicable functions as well as conditional formats that maybe resident. Can this be done?
View 8 Replies View RelatedCan i copy format from conditional formatting to other sheet or cells?
View 9 Replies View RelatedI have five fields that have a conditional format applied to them: (see attached).
Columns J, K, L, N and O. These conditionals highlight if a minimum number is entered. Ex. Minimum pushups for a 30 y/o male is 27, if a 26 is entered it highlights red. The total score (where I need this to perform) is calculated in column Q. It will format red if the total score is below 75 but what I can't figure out is how to make it format if any of the previous minimums have not been met.
Ex. In cell L4, his crunches were 25 (a automatic failure -- red formatting). Now the total score is above 75 so it calculates as passing (green), but I need it to highlight red regardless because of the minimum not met in cell L4.
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
View 2 Replies View RelatedI have a cell with both date & time "10/9/09 3:15" This is put in the current cell by formula which indexes two dif. cells, Now I am trying to copy this cell and paste into another book but like to have only date. How can I do that? Each time I try it gives me the time value in the pasted cell and I cannot even format it.
View 5 Replies View RelatedIs it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
I need to copy cells from a sheet and paste them to another sheet without overwriting the formatting of the destination cell.
When I press ctrl+v it should act like when I press F2 -> ctrl+v -> enter
how to view changes on my spreadsheet.
I have a tab called SAP DUMP where we copy our raw data to, from here we manually copy and paste into another sheet called ORDER TRACKING SHEET. When we do a fresh dump (overwrite) of raw data into the SAP DUMP tap we need to see if the there is a new entry which needs to be copied across to the ORDER TRACKING SHEET. I've got a vlookup to show this. The one I can't work out is that on the ORDER TRACKING SHEET I also need to see if there are any entries are now no longer on the SAP DUMP tab. This is where I thought a condition format might work, color the line red if it's no longer on the SAP DUMP tap. Can't make it work.....
I have a workbook with 12 worksheets corresponding to months. Each is formatted in A1 with the month (Date, Jan-01) and all rows below, starting at A5, are the days of the month (Custom, ddd d). All cells are linked so they change accordingly with A1.
I'm trying to apply conditional formatting so that all Fridays will have light grey shading across the row. I can get it to shade every 7th row using the MOD & ROW functions, but the shaded row changes with subsequent months and years (not necessarily Fridays). Can I get it to recognize every Friday through the year.
Hi1Tasks23-Apr-09Inercona.Trial1
b.Trial2
Tasks23-Apr-09Enercona.Trial1b.Trial2
Disregard the First Table. I cant remove it. refer to the Second Table
This table is a Task Tracker. The Start Button Adds the Current Date in Enercon's Row C1 and the row below (C2) will automaticaly filled with color using Conditional Formating. My Question is how can I code a conditional format for Trail1 Rows. For example when Trail1 Cell is active then you click the start Button instead of Coloring D2 Cell it should Color D3 Cell.
Here is the Code in Start Button
Sub cmdStart_Click()
Dim i As Integer
Results = MsgBox("Are you working on " & ActiveCell.Value & " today ?", vbOKCancel, "")
If Results = vbOK Then
With Sheets("Sheet1")
i = .Cells(2, Columns.Count).End(xlToLeft).Column + 1
.Cells(2, i).Value = Now()
i = i + 1
End With
Else
Range("A1").Select
End If
End Sub
Regards,
Kevin
I need to run a loop through a column of values (attachment col B) and when it finds a "J" it will apply conditional formatting to a row of 4 cells directly adjacent. The attachment is a theoretical before & after.
View 2 Replies View RelatedI would like to conditionally format a column of cells such that it formats when a cell's text equals to that in another column.
Example, in column A I have
1 Cat
2 Dog
3 Mouse
...
In B I have
1 Chicken
2 Mouse
3 Monkey
...
58 Cat
Based on the B column I would like to highlight A3 Mouse and A1 Cat.
Additional complexity, In B I have
1 Chicken Mouse Dog
2 Rat Monkey Fish
3 ...
Given that this is the format I have the text in how would I search column A and conditionally format A2 and A3.
I am having trouble with a conditional format of a date. I need it to turn the date red if it is 35 days older than today.
View 3 Replies View RelatedI have a conditional format that I wanted to add another argument to, but although the statement is true, conditional format will not toggle.
My original argument was:
Maybe I'm getting a blank, maybe the answer is so easy, but lately I canīt solve this: How do I use conditional format to change cell color if cell value (date) is not workday?
View 4 Replies View RelatedIn column B I could have blank, text or text containing the word "track" or "Track". In column C I could have Blank, "yes" or "Yes" or "no" or "No"
Only if B text contains "track" or "Track" and/or C contains "yes" or "Yes" I want to conditionally format B.
This does not work:-
=OR(FIND("track",B1,1),FIND("Track",B1,1),C1="yes",C1="Yes")
I have a table where Sales are in Column B and a % calculation is in Column E. I want to highlight the cells in green that are over 40% and that also meet the criteria where the sale in that row is above $100.
In conditional formatting I tried to use =and(b4>100,e4>40%) but it did not do anything. I am also okay with using a nested if statement.
