Vlook Up: Combobox Shows The The First Column (only 1 Of Each) And The Second ComboBox Shows Me The Secondary List
Jun 9, 2006
I have a userform where I have 2 comboboxes. The first combobox shows the the first column (only 1 of each) and the second comboBox shows me the secondary list that correlates to the valuse in the first from column B. Now I have a text box that I am trying to get the value from column C depending on what I have in the first 2 comboboxes. What is the easiest way to do it? This is all in VB since it is a UserForm, and using Vlookup seems to be too many lines if I go that route. Is there a way to use Index and Match in VB where it would be more efficient? I attached just a sample of how the data would be layed out in the Excel sheet.
I have a worksheet (say, Sheet1) that I am going to manually import a large data set into on a weekly basis for reporting purposes. One of the columns from this data dump will have the header "Design Id" in the first row, but it may not be in the same column every time. I am trying to figure out how to create dropdown lists on a separate worksheet (say, Sheet2) in the same workbook where the data source always looks up the column containing the header "Design Id" from Sheet1 and then returns only the unique values from that column as options in the list.
I have an excel file which contains a full consolidated list of data (Master Tracker). I am now creating a new tracker and what i want to happen is for it to show the list of names from the Master Tracker which exceeded the current date "now()" and the status is still pending.
FYI: The master tracker and New tracker is different excel files Here is an example:
I'm working on a function that gets its values from a Data Validation List.
My problem is that I want the function to return a value when an item in the list is selected and another if the user did not make a selection... just a basic if....then....else ... but the cell where I call this function shows the #VALUE! error while no item in the list is selected.
I call the function like this: =myFunction(RC[-5], RC[-2]) where RC[-5] is the Data Validation List and RC[-2] is a cell where the user should enter a number
why I'm getting the #VALUE! error instead of my message
I have a list in column A of percentages (to 4 decimals 0.0013) i need to conditional format the list so that it shows the lowest percentage in 'green' and the highest in 'red'.
I have set up a simple form in excel, whereby people use drop down menus to select the appropriate information (as all data inputted needs to be entered in exactly the same way to allow sorting, counting etc) so I thought drop downs were best. The trouble is the data is carried through to my excel database (on another worksheet) were it is shown in numeric values dependant on how far down the drop down list the select item appears (ie "Fareham" is third on the list, so shows in the database as "3").
I'd very much like my database to be easier to read and actually show Fareham etc, rather than be populated with lots of numbers. I initially tried using IF function (ie =IF(C3=3,"Fareham") but unfortunately two of my drop down lists are too long for this (with 25 and 33 entries respectively).
I am looking for an Excel macro that will Autofilter a worksheet to display all rows with a empty value in one column (e.g. column B) as well as display the entire row above the aforementioned row with a blank cell in column B. I need it to be "reversible" so that I can click the Autofilter button (or advanced filter button) to show all rows again.
As I am at work, it does not allow me to upload the file due to restrictions on uploading. However, the spreadsheet is fairly simple so should be able to describe it.
The main sheet is called "Investigation Court Apps". An entry is made into each row and the status shows as "Open" in Column A, until a final closure date is input in Column Z, at which point the entry in Column A changes to "Closed". This is achieved with the following IF statement in Column A.
=IF(B3="","",IF(ISNUMBER($Z3),"Closed","Open"))
So that part is all automated. What I need is some VBA coding or macro (might be same thing but completely new to all this) that when the value in Column A changes to "Closed" the whole row moves over to "Sheet3". Once the row has been moved over, I want to ensure there are no blank rows also.
I have tried the following amongst others:
Sub MoveToSheet3() Dim C1 As Range Dim RowNum As Integer For Each C1 In Sheets("Investigations Court Apps").Range("N1:N" & Range("A65536").End(xlUp).Row) If Cll = 0 Then
[Code]....
I know to open VBA its Alt+F11 and to close Alt+Q, but thats about it.
I am working on a spreadsheet which has a column which shows square footages (Column AE) and I also have a column which shows costs (Column Y).
What I would like to do is to bracket these footages in to 6 bands (0 - 5000, 5000 - 10000, 10000 - 15000, 15000 - 20000, 20000 - 25000, 25000+) and then average the costs within a particular band.
I have a spread sheet for equipment that gets loaned out on a regular basis. Cells B4 - B25 have combo boxes in them, with the options to select "On Loan", "In Stock Room" etc in them. What I would like to do is create something so that as the combo box is changed, i.e. from "In Stock" to "On Loan", a date changes adjacent to each combo box.
For example, combo box in B10 has been changed from "In Stock" to "On Loan". The adjacent cell records the date automatically that the combo box was changed.
Am trying to get dynamic population of 2nd combobox based on match from criteria in combobox 1.
if column a = bears and column b = colours of bears then
when I select bears in combobox one, combobox 2 would populate with colors of bear.
I am think of having a combobox 1 change event that evaluates each row in a specific range (does it match the criteria?) if so, then add 2nd cell (column b) of that row to the combobox 2.
I know it would probably involve match and offset, add item and loop, but I am not sure what the syntax is.
I need to populate two combo boxes from excel sheet, the data will be like below:
Column A Column B A 1 A 2 A 3 A 4 A 5 B 100 B 101 B 102
So from the above data, one combo box should hold unique values A & B.
On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.
So the data should be like below:
If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5. If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.
Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.
When I make a comboBox selection from the dropdown menu, the menu stays down until the last statement of the comboBox code is finished. How do I make the dropdown disappear immediately after the selection is made?
There is pivot table for some reason the last column (YEAccts), which sums all the other columns values is exluding the 1st column for some reason. This "YEAccts" shows up fine in the pivot table "field list". And I followed the source for this and it's a table in a different tab that pulls data from an access query connection.
The name of the column that is summing up the rest of the columns is "YEAccts", but for the life of me I can't seem to find where this column is in the source table tab or even in the access query where the data is being pulled from.
How to find this "YEAccts" column? Also, why would it exclude not summing up the data in the first column?
try and achive is when a user selects a item from the 1st Combobox the 2nd Combobox is the populated with the cell that is to the right of the selected item.
for Example if a user selects AAB from combobox1,, Combobox2 should populate with Belly.
I created a UserForm then linked ComboBox1 to range A2:A, TextBox2 to range E2:E, and ComboBox3 to range M2:M of the same worksheet, named Sheet3. The row contents in Column A, Column E, and Column M are associated. Therefore, when the UserForm is active I want to be able to select a row from Column A in ComboBox1 and have the UserForm pull the contents from the same row of Column E into TextBox2, and Column M into ComboBox3. Here is what I have so far, but its not quite doing it.
Code: Private Sub UserForm_Initialize() Sheets("Sheet3").Activate Dim ColARange As Range
I have a table, headers "FirstName" and "SurName".
Further a Userform with 2 Comboboxes "FirstName" and "SurName"
I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.
Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.
i'm writing a refrigeration selection user interface, working from values on an excel spreadsheet. how to get the programme to automatically select a value from a list or range once a user has selected corresponding value from a list within a combobox. for example if a user sets the temperature of their refrigerator to -5 celsius i need the programme to automatically select the corresponding value of enthalpy for the air at that temperature.
I want to fill two Combobox (cmb 2 and 3) dependent on what the user has chosen in a first ComboBox (cmb1).
The first combobox ist based on on the first sheet, and the second and third combobox shall be filled with values from other worksheet corresponding on combobox 1 selection.
I have a userform with a combobox that has three items to choose from: Blue, Red, and Yellow. When a user selects one of those options, I would like another combobox to appear on my userform with a specific list for that option.
I'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.
Procedure GrpADA-QSI DescProcedure GrpAnesthesia And Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And
[Code] ........
I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.
I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'
For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...
