I have to create an identical button on 20 sheets.
I have a shape creation macro but it creates in the default format.
Can I either change the default format so they are created in the way I want or code to add formatting? I need no shadow, can colour (pref with gradient fill), bevelled edges and text.
Sounds like the first option will be easiest if it works!
is it possible to write a macro that will create a folder labled "2009" then a subfolder for each month with four subfolders labled "Week 1" through "Week 4", and have the "March", "June", "September", and "December" folders contain subfolders labled "Week 1" through "Week 5"?
View 2 Replies View Relatedwhen i run the below code i get an error 438 'object doesnt support this property or method'
View 2 Replies View RelatedI am making a spreadsheet file for our football offcials group to review rules.
I tried to record a macro to copy a shape and put it into the spreadsheet, but the shape does not copy.
How do I get the shape to copy into the spreadsheet?
What I want is for them to "think" what they would do and then click the macro and it will show them where the ball would be after the foul/fouls.
I posted similar yesterday. No one helped...sniff sniff (where's the crying smily)
Now verified to be occur on other machines running various versions of Office 2007...
In Excel 2007, write this simple macro and assign it to a shape:
I created a shape and named it Cheque and created a macro to print the shape as follows:
ActiveSheet.Shapes("Cheque").PrintOut
But the macro is not printing!
I am trying to write a set of code, part of which involves moving a shape around an excel spreadsheet in a square shape within a certain range. It is based on a random number generator. The shape moves a number of cells to the left/right/up/down depending on the random number (d) multiplied by 16. If the shape reaches a row or column border point, it will change direction but continue moving in the new direction until it has gone as far as was determined by the random number (*16). I have some code which works fine... to a point! The shape starts out, reaches a right hand border, changes direction to go up, reaches another border, changes again and goes left, but then when it comes to change dorection the 3rd time and go down, it fails. The direction of the shape is determined by a word in cell A1 - left/right/up/down:
Sub MoveRed()
Application. ScreenUpdating = True
Dim d As Integer
Dim i As Integer
d = Range("AZ1").Value
With ActiveSheet.Shapes("RedDot")
For i = 1 To 16 * d
Select Case Range("A1").Value
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
I am changing command buttons over to shapes for aesthetic purposes. I went to assign a macro to call useform4 using a rectangle with the following code:
[Code] .....
It throws me some kind of file path error which makes no sense. Do I have to dim the rectangle2 for active sheet or something?
I've got a macro function which calculates the area of a polygon freeform using the 'shoelace'-methode. I would like to excute this function after i leave the shape editing mode.
For example: I have a square, freeform shape. By right-mouseclick I can edit the shape nodes. If i drag one of the nodes of the square to another position and click outside of the shape, the new shape is updated. Right, on that moment i would like to trigger my macro to recalculate the area.
Is there an event in excel to aim for, like the Worksheet.change-event or something similar?
I've got a macro that I can rund when I click on a shape. It's called "Shape_Click".
Basically, I want this macro to be automatically assigned to any shape I create, as I create it.
I know the line will be something like: [Code] ........
I have a macro that runs when I click on a shape. This macro is called "Shape_Click"
I can apply that to a shape by selecting it and manually running this macro:
[Code] .....
How do I get the subroutine to run as soon as the new shape has been selected, rather than haviong to manually run it.
Something like "Sub Worksheet_ShapeAdded" or something like that? I can't work it out.
I have map shape in my excel sheet. each country is a shapes on its own. If i Select one of the country i want to display a pop up Box. For examle if i select Americas I need it to display another box with some data and when i deselect it it should hide the box. Tried some code over here but does not work.
Sub HideShowRectangle()
With ActiveSheet.Shapes("Data1")
If ActiveSheet.Shapes("Americas").Select = "True" Then
.Visible = True
Else
.Visible = False
End If
End With
End Sub
I found in an old file that i triggered the macro by clicking a button! I would post a pic but i don't know how. How do I activate a macro by clicking a shape on the excel 2002 page?
View 7 Replies View RelatedOn the attached spreadsheet there is two irregular shapes. "Area1" & "Area2". I need to be able to determine which area the "ball" shape is located in. If the ball is in Area1 then "Multiply 8" gets the ball and "Multiply 9" moves to the blue cell "AH39". If the ball is in "AreaB" Multiply 9 gets the ball and "Multiply 8" runs to cell "S37"
I should be able to do the moving of the shapes using all the samples, its determining which area the ball is in is the problem.
In the real spreadsheet i will probably have around 10 different Areas.
Move Two Objects - Select Case.xlsm
I am wanting to make a macro into an add-in. An add-in is basically a workbook with macros that is opened when excel is correct? I know how to create an additional menu item under an existing one, but I'm wanting to create my own menu with this add-in item under it. I've used this code to try and create the new menu and placed it in the workbook open:
HelpIndex = CommandBars(1).Controls("Help").Index
Set NewMenu = CommandBars(1).Controls.Add(Type:=msoControlPopup, Before:=HelpIndex, Temporary:=True)
NewMenu.Caption = "&Separate Cashiers"
But ran into an error on the first line of code. I saved the workbook with the add-in macro in it as an .xla and used the addins under tools to have it open each time.
I want to create a pop up message showing count of cells turned red,each time the workbooked are opened.like column "I" has two dates in red colour,so the pop up will say "you have 2 contracts expired"
View 8 Replies View RelatedI'm needing some code that will program-magically do the following interactive stuff:
1. Go to the first cell that will be the start of my range, say "D1".
2. While holding down the "shift" key, press "end", then "down". All of the desired cells will then have been selected. [side note: how can I detect that the "d2" cell is not blank - I don't really want 65K cells in my range?]
3. Next, "Insert", "Name", "Define", then typein the desired name range ("schoolList", here) and press enter.
This would seem to be a case for using the macro recorder but the range will always come out hard-coded, rather than the cells that would be selected using an "end" "down" selection.
I have a UserForm with a CommandButton; when I click on it a function creating dynamic checkboxes on another UserForm is implemented and then this second UserForm is displayed (and the dynamic checkboxes are displayed too).
Code:
Private Sub cmd_BUTTON_Click()
If MsgBox("Are you sure you want to add Dynamic CheckBoxes?", vbQuestion + vbOKCancel, "") = vbOK Then
UserForm1.Hide
UserForm2.Caption = "DYNAMIC CHECKBOXES"
Create_DynamicCheckboxes
End If
End Sub
Code:
Sub Create_DynamicCheckboxes()
Dim CheckBoxTop As Integer
CheckBoxTop = 75
Dim i As Integer
For i = 1 To 10
Set theCheckBox_ID = UserForm2.Controls.Add("Forms.CheckBox.1")
[Code] .........
Everything work fine!!!
Now I have the UserForm2 displayed that include 10 CheckBoxes, which names should be:
chk_1chk_2chk_3chk_4chk_5chk_6chk_7chk_8chk_9chk_10
Why the following code doesn't work???
Code:
Private Sub chk_1_Click()
MsgBox(chk_1.Value)
End Sub
In the new 2007 version , can a specific hot key be created to perform Past Special Values? This key assignment was available in 2003, but we can't find it in the new 2007.
View 9 Replies View RelatedI want a marco for excel which does the following task
There are there are two worksheets namely Sheet1 & Sheet2 in the same workbook.I want to create multiple (new) worksheets in the same workbook based upon the number in cell A2 of sheet1. Further the new sheet that has been created shall be same as Sheet2.
Suppose the value in A2 is 2, then the macro shall create two new worksheets (whose data is same a sheet2).
This might be a little complex to understand but I am going to try to make it clear as to what I am in need of. Basically I have a larger macro that runs and I need to add a pop up that asks for a percentage to be put into a new sheet. The percent is the percent of random rows on the current sheet to be put into a new sheet. Then it would have to create the new sheet with the random information. This is for a audit and we want to have it done randomly and no duplicates. There are no duplicates in the list at this point. The width if needed is from column A to column E.
View 2 Replies View RelatedI write macros that creates a treeview according to data from column "A". In attached example I have series of numbers, that means following:
0 is a root (A1), 1 is its nod (A2), 2 are nods of 1 (A3,A4), three appearance of 3 are nods of 2 (A5,A6,A7) , e.t.c.
It means that I must dinamically to create the loops.
How to make it.
All that I know is a static creation.
I'm preparing a model which has a few macros built-in. Let's call them Macro A, B, C etc. I want to trigger them via buttons on a custom toolbar (no problem) which a recipient of the model, on another PC, will be able to see (problem).
It was suggested to me that in Customize mode I can right click the custom toolbar and then click "Attach..." but this always causes Excel (2002) to freeze; I must then close Excel.
Someone else suggested that a better way is to have VBA code create the toolbar "on the fly" automatically when a recipient opens the spreadsheet. This is too advanced for me to write at the moment. Could someone give me a steer?
i am SAP developer and i m working on SAP - excel integration. i am fetching data from SAP tables in to excel and in each row of the excel i want to create a dynamic list box and populate dynamic values.
i know the logic for data fetching but not logic for cretion of list box dynamically and handling events of dynamic list boxes..
I just realized that after create 1200 checkboxes using VBA then excel will prompt an error. Something like object automation bla...bla....bla. What Is the shortest code with VBA to create 2000 checkboxes? I run copy paste function with VBA but seems not working well.
View 7 Replies View RelatedI need a macro to copy the data from the rows in Sheet3 into a specific place on "Sheet2" (Column "C" to E10 on Sheet2, D to E11, Q to E12, R to M12, S to T12, G to Y26, H to AF29, M to AF30, N to AF32, and lastly the current date to AC10) then rename the sheet to the Value of "E10" on that sheet then Copy that sheet to a new workbook and then clear the data on "Sheet2" so that only the information that was on the sheet before the data transfer is left and reset the name back to the original. My problem is i'm going to need this macro to do this for every row of data (Customer) that is in my list range of B10:R2114. So i'm looking for maybe a macro that loops an amount of times equal to the counts of data in the address range
=count(D10:D2114)
I have a macro that Creates a new workbook (which you name and place, which is good) and then copies a specified sheet over to the new workbook. I hope I wasn't to convoluted in what I'm trying to accomplish. heres the current macro I'm working with.
Sub copySht()
'declare the variables
Dim wb As Workbook
Dim ws As Worksheet
Dim fName
With Application
'prevent unnecessary error messages
.DisplayAlerts = False
'switch off screen updating to speed up code and prevent screen flickering
.ScreenUpdating = False
Trying to automate footer creation, center header sets ok then errors out on left footer with
Runtime error 1004 : Unable to set LeftFooter property of the PageSetup Class
if I comment out the left footer line the center sets ok then stalls with the same error on the right footer
VB:
For Each WS In Worksheets
With WS.PageSetup
.CenterHeader = "&""Calibri""&22 &B" & msg9 & vbLf & "&14 &B" & msg1
.LeftFooter = "&""Calibri""&11" & msg2 & " " & msg3 & vbLf & "Owner: " & msg8
.CenterFooter = "&""Calibri""&11" & msg4 & vbLf & "&11 &B &K4a0c80" & msg5
.RightFooter = "&""Calibri""&11" & msg6 & vbLf & msg7
End With
Next
I would like the individual cells of C1 and D1 to allow me to input values up to 100. The tricky part is that if D1 equals 100 I would like C1 to be less than 100 and vice versa, if C1 equals 100 then D1 should equal less than 100.
Ex. C1 = 100 & D1 = 10
This should never happen: C1 = 100 & D1 = 100. I would also like an error box to show when either of the cell values exceed 100.
What I am looking to do is have a calendar on a worksheet that populates with dates from multiple worksheets across the workbook. I've got approximately 15 worksheets to pull dates from. Within each worksheet I have a table with 5-10 check options (Form control check boxes). When an option is checked, several dates appear going across the rows on the table. The dates in each row have several date ranges. For example, if I check option 1, I will get 4 separate date ranges of varying amounts of time. I would like these date ranges to then populate on the calendar. All worksheets should populate the same calendar. As each worksheet may have similar options, I would like the listing on the calendar to state Worksheet Name - Option Name for it's entry onto the calendar.
I've looked at the design of the calendar provided by Pete_UK and it looks like something that would work for me.
I've included a condensed version of the spreadsheet I am working on as well as the calendar created by Pete_UK.
How to create an audible alert in XL. To be more specific, I would like the system to alert me on various due dates for the data entered. The key filed is the DATE. The due dates for re-validation could be between 07 days to 3 years.
View 2 Replies View Related