i am SAP developer and i m working on SAP - excel integration. i am fetching data from SAP tables in to excel and in each row of the excel i want to create a dynamic list box and populate dynamic values.
i know the logic for data fetching but not logic for cretion of list box dynamically and handling events of dynamic list boxes..
i want to create dynamic validation list in excel. The logic shd be like
this. i m fetching data from SAP on the click of execute button in sheet2. at this point of time i want to create dynamic validation list in sheet2 in row "E". and data to be filled in the list will be fetched from sheet1. i have added new named range in sheet1 called"mbe"(in sheet1!A) when user will execute excel i will feel data in sheet1 cloumn A. and i have written this code in the click of execute button :
With ActiveSheet.Range("myrange")
.Validation.Delete
.Validation.Add xlValidAlertStop, , "=mbe"
.Validation.InCellDropdown = True
.Validation.IgnoreBlank = True
End With
its giving runtime error "1004" (object defined error)
I've converted to a dynamic validation list which allows for a selection of data to be made available based on the selection of the two previous columns.
Unfortunately since creating the new validation a circulating error occurs when tabbing through the table (B) to create a new line or entry? Additionally I've found the following to occur also;
1. The payments and PO# columns converts a red shade colour?
2. The validation on Table B description column do not work while in excel online edit mode?
I'm needing some code that will program-magically do the following interactive stuff:
1. Go to the first cell that will be the start of my range, say "D1".
2. While holding down the "shift" key, press "end", then "down". All of the desired cells will then have been selected. [side note: how can I detect that the "d2" cell is not blank - I don't really want 65K cells in my range?]
3. Next, "Insert", "Name", "Define", then typein the desired name range ("schoolList", here) and press enter.
This would seem to be a case for using the macro recorder but the range will always come out hard-coded, rather than the cells that would be selected using an "end" "down" selection.
I have a UserForm with a CommandButton; when I click on it a function creating dynamic checkboxes on another UserForm is implemented and then this second UserForm is displayed (and the dynamic checkboxes are displayed too).
Code:
Private Sub cmd_BUTTON_Click()
If MsgBox("Are you sure you want to add Dynamic CheckBoxes?", vbQuestion + vbOKCancel, "") = vbOK Then
UserForm1.Hide
UserForm2.Caption = "DYNAMIC CHECKBOXES"
Create_DynamicCheckboxes
End If
End Sub
Code:
Sub Create_DynamicCheckboxes()
Dim CheckBoxTop As Integer
CheckBoxTop = 75
Dim i As Integer
For i = 1 To 10
Set theCheckBox_ID = UserForm2.Controls.Add("Forms.CheckBox.1")
[Code] .........
Everything work fine!!!
Now I have the UserForm2 displayed that include 10 CheckBoxes, which names should be:
chk_1chk_2chk_3chk_4chk_5chk_6chk_7chk_8chk_9chk_10
Why the following code doesn't work???
Code:
Private Sub chk_1_Click()
MsgBox(chk_1.Value)
End Sub
I am in the process of setting up some graphs. The graphs will show the last 6 months of data so they move as each month is goes. I saw a slick way of doing this using the count function but this did not quite fulfill my needs. What I was looking for is to be able to input the start month in a cell. The cell would be part of the function within the formula. I created a simplified version of the spreadsheet below.
Spreadsheet.jpg
Then I created my names using the ctrl-F3
Names.jpg
I then created the graph I wanted and wanted to use the formula =SERIES(Sheet1!$B$3,!chtCat,!chtIssuesReported,1). This kept getting an error indicated nothing really. It basically says there is something wrong with my Series function. I have a working version of a similiar worksheet I have been basing my entries on. They look almost identical but mine is failing. I also created a new file and tried this and it still fails. I can run the formula evaluator within Excel 2010 against the !chtCat and !chtIssuesReported names and they both return the correct value (which equals areas on the spreadsheet). I have also tried to enter the spreadsheet name and a tab in front of the names to get them to work and still get an error. Basicall I am trying to create the graph below (this grpah is using the hard coded locations)
Graph.jpg
This might be a little complex to understand but I am going to try to make it clear as to what I am in need of. Basically I have a larger macro that runs and I need to add a pop up that asks for a percentage to be put into a new sheet. The percent is the percent of random rows on the current sheet to be put into a new sheet. Then it would have to create the new sheet with the random information. This is for a audit and we want to have it done randomly and no duplicates. There are no duplicates in the list at this point. The width if needed is from column A to column E.
View 2 Replies View RelatedI put together some code which at the end of it I am wanting to show in cell D1 the creation date for the most recently created file found.
View 5 Replies View RelatedI have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
I have a dynamic table which is linked to a couple of charts. The table must remain dynamic.
I needed to add two new columns to the table, "Focus Area" and "Category". I need a drop down list in the "Category" column to be dependent on the item selected from a drop down menu in "Focus Area".
I can get the first row of the dynamic table to do this.... however; subsequent rows all lock the drop down list in the "Category" column to the same choices regardless of what is chosen in the "Focus Area" list.
Is there a way to make dynamic drop downs within a dynamic table?
I've attached a spreadsheet showing the effect I'm trying to achieve. A list (which changes weekly) contains employee details and length of service. Based on the length of service I need to build a new list grouping the employees based on the service length.
list-test.xlsx
is it possible to have an dynamic list, so that when I add in a new entry in to the input column, the output column will automatically change to the same thing. Also then my dropdown will realise a new entry has been inputted (uses the output list) and the list will update to show this.
View 2 Replies View RelatedI am trying to do a dynamic drop down. The left one is working fine, where as the right one is not. (see example) I just cannot get a complete list, even though I am using the same formula.
View 3 Replies View RelatedI've trawled the internet for an answer to this problem with no luck, but I'm sure with your immense knowledge you guys will have the answer. Basically, I have a provider list offering different types of activities and I'd like a dashboard where you can select an activity type from a drop down menu and this will display the provider details that offer that particular activity. I enclose a sample of the provider list for information.
View 2 Replies View RelatedCurrently I have a spreadsheet with the following columns.
A - company name
B - Company expense date
C - company expense amount
There are many different companies, and each company has multiple rows for different expenses.
How would I create a drop down box, where I can select the company name and have excel create a list of all the expense amounts for that company?
I have a table in a workbook with names in the left column and top row. The intersecting data fill the rows under and to the right of these named areas. I need to keep this table in its own workbook, because many sheets in other workbooks will access its info. I have linked this workbook information to a sheet in each of my accessing workbook. I call this sheet "DataLink" and it is a sheet that uses an If(Original Data Ref Cell="","",Original Data Ref Cell). This works well at bring the data into my active workbook.
My active sheet has 2 drop down lists. One for the top row of names on the DataLink Sheet, and one for the left column. I have used the Offset Function refering to cells with the countif and count functions in my Data Validation setup to make the addition of the names in the DataLink Sheet Dynamic. This also is working well.
In my Taget cell (CeIl where I will get my answers) I use the Indirect(row) indirect(column) to retrieve my intersecting data relate the the row and column. This works well as long as I establish my defined names of each column and row with Ctrl-Shift-F3 and choose (Top and Left)
Now my problem. Although I can dynamically add the names to my drop down list I cannot retrieve the data from new entries on my DataLink Sheet(remember coming into active workbook from outside source) unless each time I return to my DataLink Sheet,and highlight the entire range of cells and do a new Ctrl-Shift-F3, which then ask me if I want to replace each name one by one. I have some 700 names defined. And this is disconcerting to say the least. Is there a way to add code to automatically add the contents of a cell as a defined name. This way as my information from my original data workbook enters the DataLink Sheet in each of my Active workbooks, new names that appear in the left column and top row will be defined as have intersecting data under them.
I have a sheet (database) which has dymamic validation lists based on a another sheet called "look ups". The problem I have is When I choose any of the validation drop downs there are two blank entries at the bottom and the cursor is on the first one of these. I would like the cursor to be on the first entry in the validation list
View 7 Replies View Relatedhave data in the attached file arranged as follows:
"Source Data" sheet Data in columns A to L will be updated daily by pasting from another workbook. On any given day the data in columns A to L may have more or fewer rows than the day before.
"Lookup Table" sheet The aim is to return the data from the "Source Data" sheet; the selection depends on the Data Validation choice in cell O1.
I would like to be able to sort this dynamic list of data - ideally by clicking a single button - in descending order of the values in column L.
Im designing a form which will be a few list boxes that input data into specific cells in another sheet.
I would like the list boxes to change depending on selection.
eg: if there is a certain value selected in the first list, then only the relevant values will appear in the second box.
so if there are values Potato, Banana and Apple in list one, and list two contains values White, Yellow and Red.
if banana is clicked in list 1 then only yellow will appear in box 2 as a selection.
I have a successful dropdown menu that removes items that have already been selected through the dropdown list, however, I need it to be able to handle IDENTICAL items. At the moment, it can only handle unique items.
I'm trying to create a Rota Planner. I have a selection of shifts that need to be selected for each day. Some shifts are repeated (meaning that there may be 4 members of staff on the same shift). As ONE of each of the 4 shifts are selected, I then want only 3 to be displayed in the dropdown menu to be selected, until all of them have been selected.
I've tried to break apart the code that provides dynamic dropdown list for UNIQUE values but I'm tearing my hair out and getting nowhere.
I have created a userform where I have a combo box and an options box. I want the combo box to reference a specific list of values. And if the check box is selected, I want the same combo box to reference a different list of values. This is the present syntax I am using. For some reason, The value of the check box does not alter the list in my macro.
Private Sub Userform_Initialize()
If chkHeader.Value = True Then
cmbSort1.Clear
With cmbSort1
.AddItem Range("A1")
.AddItem Range("B1")
.AddItem Range("C1")
[code].....
How do you calculate the average of the last 20 values in a dynamic list? The list is in column A and updates every day by adding a new value in column A.
View 3 Replies View RelatedI have a sheet of un-ordered data with duplicates. Looks a little like this:
Sheet2
*
A
B
[Code]....
What I want to do is: on a separate sheet, when the user inputs a Region name, it will return an array of unique Locations under that Region. For example, if the input is "NORTHEAST", the following would be returned:
Sheet3
*
A
B
C
[Code]....
sorting list with date ranges with formula.
I have a list of dates and I want sort them by growth, also only to show the values after specific dates. I know how to do it with Macro, I just need list changing dynamically.
I have created a spreadsheet that has many dynamic ranges, one of which is a list of vendors that my company uses, named "Company". This range is in a spreadsheet labeled "Analysis Search". From this list and on another worksheet, I have created a drop down list via data validation where the user inputs the vendor, and should the vendor not be in the dynamic range, a prompt will appear and warn the user that the name of the vendor is not already in the dynamic range and to add it once the entry is complete.
What I am looking to do is for Excel to automatically add the vendor to the dynamic range instead of having the user have to input the vendor. Also, I have used VB to have the range automatically sort alphabetically, so I would like to keep that functionality if possible. Is something like this feasible in Excel?
Is it possible to have a list in a summary sheet, containing the names of all other worksheets in the workbook, which will automatically update when a worksheet is added or deleted? I use Excel 2003.
I need to create a large dynamic named range for all the people in my church. From this list I would like to enter their offerings to the church in a new column that has auto-complete. Ex. If I type a "P" all of the possible names are shown. Then if I type a "A" the list gets smaller with only a those members whose names start with "Pa"
View 4 Replies View RelatedI need to create a 2-stage dependent drop down list.
Stage 1:
In cell G7 (on a tab called 'Data'), I have created a drop down list based on a range name called 'Region' .
Stage 2:
In cell G8, I need to create a drop down list which is dependent on the value chosen in G7.
Problem is, I will need to create a dynamic range name here which needs to vlookup or match the value from G7 in a dynamic list of data (the data is on different tab called 'RCA Data' and is spread over columns A:E with row A for headings - the data will go down an undetermined number of rows)
Every time the value in G7 matches a value in the 'RCA data' (the potential matches are stored in column
D) I need the corresponding cell value in column C to be added to the dynamic list. This list then needs to be available to choose from a drop down list in G8.
I have a list of names and an associating number with those names. I'd like to create a dynamic top 10 list, but my problem is that I have duplicate values, here's a sample:
[Code].....
I tried to use LARGE and INDEX to create a top ten list like this:
=LARGE(Names,ROW(1:10))
=INDEX(Names,MATCH(T2,Count,0),1)
But, when the list comes out, it shows only the first entry with a duplicate result:
[Code] ....
How I can get it to grab the second "Name" with the same value as the first?
I am attempting to create a form in excel with dynamic data validation fields. What has me stumped is that I want to create multiple complex dependencies (for instance, if you select something from a drop-down list in the first field, that then gives you a specific range in the second field. Then based on what you placed in the second field it gives you a specific range in the third field.). What I can't seem to work out is the formula for making this work.
Is this impossible? Also sometimes the third field my be blank.
Here is an example of what I am trying to accomplish
Assets 2.PNG
