i am very new to and admittantly can only use by running through the commands...i dont know how to run/use a macro with vba language...
so, i can easily set up a small macro run button that allows users to input a ''member number'' at any one time manually and it then selects the data behind that number and prints all relevant info/sheets etc,,,
HOWEVER, i dont know how to do an auto run selection in macro...so, rather than manually entering member 1, select, print, then manually enter member 2, select, print, then manually enter member 3 etc... i want to produce a macro that would automatically run the whole list of member numbers from 1 to 170 in order and print all their relevant info in one go...rather than manually entering the numbers which would take ages...
in a nutshell, select all (1 to 170), run all, print all...
I would like to run a macro against a worksheet that will have variations in the amount of data (rows not columns). The column headings will always stay the same.
Once the basics in the macro run (formatting) I will need a certain statement to "lookup" values in a column (see values below) "count" them and give me a total.
I have attached a before and after file showing what I would like the macro to ultimateley do because it is so time consuming. Any assistance would be most appreciated.
I need to select a print area that includes all rows to the last row with data in column A. What is the proper code for this? I tried the following (shot in the dark), and of course it doesn't work.
Sub Print_() ActiveSheet.PageSetup.PrintArea = "A( Cell((65536).End(xlUp)):X1" ActiveSheet.PrintOut End Sub
Where I've typed 'XXXXXX' this is the word that will be translated in ultralingua.
Is there any way that XXXXXX can be replaced with the contents of a source cell i.e. so ultralingua translates the contents of one of the cells from column A? I'll the transcriibe the result into column B.
how to change language of MS office.English language is not showing in options.Do I need to purchase language pack?I am using english language other than office.
I have a sheet that the first words in the cells are in Arabic. How can I move the foreign words to another column? The number of words varies and they are all in the beginning of the cell.
A co-worker has an excel file that has both English and Chinese words in it. We need to convert the Chinese text to English. The contents of the files are sensative so I cannot share a copy. how to correct this?
I have users that submit a workbook quarterly. Many of the submissions contain name ranges that I need to remove. I wrote the below to delete the named ranges but encounter an error when the macro encounters a named range with the Kanji (Japanese) character set. How can I update this to delete these ranges as well?
Sub DeleteNamedRanges() Dim ws As Worksheet Dim NR As Name
On Error Goto ErrTrap
For Each ws In ActiveWorkbook.Worksheets ws.Activate For Each NR In ActiveWorkbook.Names NR.Delete Next Next
I'm new to Excel and I'd like to know since it's more organized are the scripts better than other programming language scripts such as Ajax, JavaScript, Java FX, etc.
I found several examples on google, but unfortunatly it conflicts with another macro I use for forceing users to enable macros (hide all sheets except one if macros are disabled).
The attached file is an example contaning the save&close code and the show/hide sheets depending on macros enabled.
If the file is opened with macros disabled then only one sheet will be visible. If the file is opened with macros enabled other sheets are visible.
The problem if that this code uses a custom save, witch makes the save&close not save... (in module1 and in ThisWorkbook)
The pourpose of the save&close is to make sure some users don't forget the excel open and thus block access to it. So if a certain idele time passes excel has to save and close without any confirmation messages.
I'm using a CALL Macro to split up a HUGE macro into different pieces:
Code: Sub RSLDASHBOARDV2() 'Macro recorded 12/14/2010 by Ryan R. Koleno, Pharm.D. 'Last Updated 7/10/12 by Ryan R. Koleno, Pharm.D. 'Do Not Modify Code Unless Given Proper Privileges to do so. Dim APPSPD As Worksheet With Application .ScreenUpdating = False .Calculation = xlCalculationManual
[code]...
The first few macros dealing with page setup and what not work fine but when it hits the Pivot table code for the STATSPIVOT macro it errors out stating: "Run-time error '1004': Unable to get the PivotItems property of PivotField class' at this point in the code:
Code: objField2.PivotItems( _ "TRC").Position = 1 objField.PivotItems( _ "MEDCO MAIL OR AOB").Position = 2
When this macro is not split up it worked fine as written. Am I overlooking something in the Call Macro's code or is there a variable I'm not aware of. I have included the Pivot Table code that errors out as well.
Code: Sub STATSPIVOT() 'STATS PAGE BASED ON STATS DATA TAB Sheets("STATS DATA").Select Dim objTable As PivotTable, objField As PivotField ActiveWorkbook.Sheets("STATS DATA").Select Range("A1").Select
I am making a spreadsheet that sorts and pastes, but I need to know if I can add a code to the Sort and Paste Macro that will open the second spread sheet needed without just already having it open and using the
I have a macro where I manually select a cell then the macro kicks in to copy and paste the contents into the Find function. From there it goes to another work sheet, clicks on a cell in column one and searches for matching cell contents. Then If false it manually goes back to the original worksheet/cell and then I input a N in the left adjacent cell. If true I enter a Y. Right now I can only run this for the specific cell the macro was recorded for. I would like to expand this.
What I would like to do create a loop in the macro that waits for my cell choice input then continues with the with the Find function. If false the macro should just loop back to the original worksheet/cell and wait for input, ie the next cell selected. However, if true a worksheet/cell is selected, a Y is input and it loops back to the original cell and waits for input.
This is the code I use to call a macro when the macro Im calling is in the same workbook.
[Code].....
However, I would like to call this same macro when using another workbook. I copied the macro "Clearformating" and pasted into a personal macro workbook module. However when I add this code to the sheet tab it will not run the macro.
I have a macro that I found somewhere on the net to look within a folder and list all the files of a certain file extension.
The macro to do this is in the attached example and is called 'Get_File_Names_Within_Dir_ext'.
I have created a basic userform outline, 'UF1' for the user to define: Select File Extension Select Folder to Search Destination Sheet
I just don't have any idea how to sync the two.
If you type 'exe' into 'TB1_File_Extension' of 'UF1' the macro should search for '*.exe' files within the specified folder.
The search folder 'RefEdit1' box should open a windows explorer box (or some such) so that the user can select the directory in which to search for the previously specified file extension.
'TB2_Destination_Sheet' is a text box for the user to type the sheet within the workbook in which to list the files found within the specified directory.
'CB1_Find_Files' should activate the macro to find any files for the specified criteria.
There is also a Button 'Find File Types' in Sheet1 of the file which should activate the userform 'UF1'.
I have a worksheet in which I have a worksheet_change macro. This worksheet_change macro makes sure that a few cells will keep their colors, even if the user copies and pastes a new value to that cell. This worksheet_change macro runs each time there is a change on the worksheet. Now my problem is that on the same sheet I have an update list macro which updates around 20.000 rows and two columns (which is alltogether around 40.000 values) and it takes a while to run. So.. it takes a loooooooooot of time (too much) when these two macros both run.
My question is that can I somehow disable the worksheet_change macro while the update list macro runs. I mean something like when I start the update list macro to disable worksheet_change macro and when the update list macro finishes, then reenable worksheet_change macro?
I have a macro which refreshes a query when the spreadsheet is opened. This works fine when online.
However, if the user is not online, the query is unable to refresh and the macro just hangs.
Is there a code which will enable me to say " if unable to refresh then move on to the next line"?
here's the code below.
Private Sub Workbook_Open() Sheets("Houselist").Activate Selection.QueryTable.Refresh BackgroundQuery:=False Sheets("Front").Select Range("A1").Select End Sub
I am looking for a macro that i can store in my personal.xlsb. what i need is pretty much is something like this
private sub workbook_open if workbook.name "inventorysummary.csv" then application.run "personal.xlsb!capacity" end sub
I only need it to run just for this file and i cannot place it in the file due to it gets replaced every day. Which if it didn't get replaced. I know how to do auto opens when the file stays the same I am just unsure for this.
1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
I have written two VBA programs around the same time. Both run on open and pull external data and create graphs. My problem is that I want the end user to be able to run the report multiple times by choosing the name of the macro from the Excel macro menu (i.e. Tools>Macro>Macros) but only one of the workbook macros shows up on the menu. why the other macro is not visible on this menu???
I've recorded a macro that copies an entire tab into a new spreadsheet then goes on the copy and paste information from one tab to another.
When I run the macro from the Tools>Macros menu it works perfectly. But when I copy the code and add it to that of a button it fails and posts the following error: Run-time error '1001': Select method of Range class failed.
The first attachement shows the code for the macro as it is alone, and the second shows how I simply copied and pasted it into the 'view code' window of the button.
Needless to say I'm a beginner at macros and only every record them, I can usually make stuff work that way but this has me stumped!
Put in a statement within a Macro that populates cells with the values that I want it to but instead of populating all at the same time, is it possible for the values to be delayed.
I have designed a mock spreadsheet (attached) it has two columns 'Before' and 'After'
After = Before values (in this mock)
When you press the button, the values are populated straight into the 'After column' can we add the delay between the values? So that the values dont come up straight away.
I have recorded the following marco and it works fine. I would like to modify it so the user would highlight a range of cells rather than have the fixed area :