Excel Forum.jpg
So I want the SUM of the total from a certain range of dates to go into the Week Columns on the right. I'm gonna manually select the date ranges for each Week but how can I set up a formula to Sum the Totals at the right of the table based on the Date Column.
The below is a data sheet which is going to be designed to keep the records of "sending and receiving" details of wash-garments from a garment factory.
Descriptions;
01. Starting from B12, the dates of sending and receiving are entered in the sequence they occur. Both sending and receiving can occur on the same date.
02. Starting from C12, there are reference codes related to the activity, if Sending the letter is entered as "S", and if receiving it is entered as "R". I included this for the calculation or sorting purpose.
03. Columns D to J includes the break down of sizes of the quantities sent or received.
04. column K simply calculates the totals of the columns from D to J.
Requirement : I need to have the totals of each size wise quantities sent and received in the "summary table" as follows;
>> Size wise totals of "sent qtys" to be shown in D5 to J5(referring to the code "S")
>> Size wise totals of "received qtys" to be shown in D6 to J6(referring to the code "R")
>> The dates to be updated and displayed"automatically" in the rows of the column B, when the code letters("S" or "R") is entered in the column "C"
Special Remarks : The last date of sending or receiving cannot be predefined, the rows(dates)will be kept adding according to the way sending and receiving may occur.
it's a search loop which runs the following when the file is opened. I would put it in the workbook_open sub but instead I want to have the sheet update before a main userform appears.
What I need it to do is:
Read each cell in column K from row 6 onwards to the last active row.
If a value is found then store the value (let's say as variable x) and from that cell, add up each value starting in the cell that is two columns to the left (column I) and one row down, onwards going down until a cell = "" is reached in that column (contains nothing). The total values added in column I could be stored as variable y.
Once cell = "" is reached, have x - y to make z and then the total (z)should display in the cell to the very left of the very original cell that contained the value x.
Finally, if x = the value in the cell to the immediate left from where x is (so same row but in column J), have that whole row from column A to L turn green, else have it turn orange:
Attached simplified sheet gives background - but need to update the cells in the aggregate monthly table C44:C55 based on data in single cell above, and according to the correct month. Need do this without the previous months data changing.
Month is determined by cell E8 and data to be updated to the agg month range is to come from cell C15. The month date will change automatically as will the data in C15.
I'm attempting to force excel to auto update the day of the week, and the date in a spreadsheet. The date isn't as important, since it can be hard coded. The only problem there is some months have 31 days, some 30, and another with 28. I've uploaded an image of the spreadsheet, and you can see in field A1 the date/year is input. I'm wanting to find a way to force the days/dates in fields 2E and 3E to update based on the month.
View 9 Replies View RelatedI have used the function = now() to have the most updated time but it updates a workbook when I open it in the first place. How I can avoid this?
View 9 Replies View RelatedI would like to get the total in column B but its not giving me the correct total. So I would half to use a helper column in column D to retrieve correct results. Is there anyway I could have an all in one formula for this. I would prefer not to use the helper column. The correct result is in cell D23.
View 9 Replies View RelatedI am trying to calculate a total of a supplier between 2 dates. The total must fall in between the entered dates but the dates can be any given date and not limited to the dates in the supplied list. See attached scaled down example?
View 2 Replies View RelatedI need to find a formula which will give me a total of £'s between a start and end date.
MY data is an extract with names, individual dates (Ie, 01/05/08, 02/05/08, etc) and costs per day. What i want to do is show a total for the month using the start and end date of that month to add up all the costs within.
see the attached workbook with two different sheets (same data) using different formulas. Each has problems (red text) preventing me from moving forward.
I need to calculate time in level 1, time in level 2 and total time for each row and then be able to sum for the month. Unfortunately, sometimes there is missing data, but I still need to calculate everything possible using a consistent formula that can be applied to the column/row universally.
I have a spreadsheet that tracks “points” for hourly associates on a daily basis that totals weekly and monthly. This spreadsheet works on a rolling calendar year instead of a fiscal and I need to be able to capture the totals for periods of time by days.
For example, I would need to view how many points ‘employee x’ has from 2/25/09 through 2/25/10. I have attached the spreadsheet, which includes tabs for each week ending and a summary page.
Based on the photo below i am looking to sum and multiple totals based on information presented.
I am looking to have the Total items calculated based on either the size run value(which in this case is 111, or 121, or 123,or 222 etc, all based on clothing sizes 1-s, 1-m,1-l) or calculated based on the Total from the sum of all the sizes (xs,s,m,l) which in this case is 9. and if that was not enough, then have the Total Items multiple based on the No of Packs, which in this case is 6.
In this example i have managed to get the formula to multiple 1 size run (111 = 3) multiplied by the number of packs (6) to get 18, (Size Run, is a drop down list from a reference page
I guess i need to know if there is an AND or OR function that can be combined with the SUM or SUMIF function.
Excel formula.jpg
I need to make a sheet that give totals based on monthly figures from last year.
Then based on difference between the 2 it will show no increase and no bonus, or it will show an increase and bonus based on increments $75.
One month Last year the store made 31.82% on it’s money.
The bonus for anything over is $75 per 10% increments.
Ie
0.00% $400
0.10% $475
0.20% $550
0.30% $625
0.40% $700
So this month was over last months, 37.18% so the bonus was $3,975.
What formula do I use to make this calculation shown under % is nothing but anything over adds up to a relation with $75. added to a base of $400 every 10%.
This hurt my head trying to get it right and im new to this more complicated formulas.
Spreadsheet consists of the following:
Worksheet 1
B10 : B49 = Names
AO10 : AO49 = Amount
Worksheet 2
I want it list the Names only from highest to the lowest from worksheet 1. If two Names have the same total then I want it in Alphabetical order towards who will be listed first.
Example:
Worksheet 1
B10 Sam AO10 10
B11 John AO11 14
B12 george AO12 16
B13 Steve AO13 9
B14 Carlos AO14 9
Worksheet 2
george
John
Sam
Carlos
Steve
Per the attached, I am looking to add restrictions to my formula based on YEARS OF SERVICE per the age restrictions each person falls into, those with 0-4 YOS who are under 20 years old etc.
Book10.xlsx‎
I have a number of Grand Totals that equal to Hours of Work in a day ( Based on Demand from Customer Orders)
I only have 95 ( this will be a number in a cell that I want to be able to change if needed) work hours available to me each working day.
I want each day to attempt to fill in up to 95 hours , anything more and it will push the remaining balance forward into the other cells.
IE here is what I have for the next 5 days for Totals
211.3798120.304870.0099110.734375.041828.1292
Under the 211 I want it to change to 95 and then carry over the balance to the cell under 120 , I then want that cell to change to 95 and carry over its balance to the next cell and so on down the line. I will always have 22 Working Days I want to work with. So the last day may or may not have a greater then 95 total.
The 95 part I want to be able to change that to whatever number I think I will have available to me and it will adjust accordingly through the line.
I have two columns with total hours worked at different places and a grand total for both together in a third column.
I'm trying to sum the total hours for the week so far from Thursday till the following Wednesday for each week.
I want the wookbook to look up todays date and tell me what the total hours are for the current week
I'm using Excel 2003 - see the file attached
I have a spreadsheet that is now a yeare old with 5000 rows and is now going into the 2nd year
Column A is for date input and the same date can be repeated several tumes :-
1 Jan 09
1 Jan 09
1 Jan 09
1 Jan 09
2 Jan 09
2 Jan 09
3 Jan 09
3 Jan 09
3 Jan 09
Sometimes there are all 30 /31 days but normally not .
I need to find the last ocurance of the last date used for each month and then use the cell number to calculate the column totals for that month.
i have this macro that sorts out a few cells
View 4 Replies View RelatedI have few sheets in a workbook and last sheet named report, I update each sheet date wise except report, problem is that the report sheet contains formulas of last rows sum, if I update today date report then I should change all formulas in reports. Kindly see attached file.
View 5 Replies View RelatedI am working on a chart which is updated every week. For clearness purposes, I would like to get the chart titles integrating the date of the last update. For instance, if the data are updated on the 13/06/07, I would like the chart title to be automatically: Last updated on 13/06/07 and so on.
View 4 Replies View RelatedI'm trying to update an excel document which has a list of employees on it along with their training. Most of the training for individuals needs refreshed in the next year so wanted the table to use the date and perhaps trigger a fill colour change once they are close to needing that training. here's an example
John Smith
course 1
Completed 01/05/10
Refresher required 01/05/14
Once we get a month or two before the required date, I would like the fill colour to change to highlight that they refresher training should be organised soon.
In I2 cell, I have date in below format.
[Code] .....
I want Excel to automatically update the date in Column N2 with MM/DD/YYYY format.
This would go on until last row in I column.
I want the system to update the date or date and time in some particular cells when i am updating /using a particular. i written a code
But neither gives an error nor it gives any values. my code is below. Also i want the time details to be fixed meaning once i enter cell a1
it produces the current time / date , it should not be editable again
[Code]...
Found this macro in a differant thread for a date stamp in A1. I changed it to C38. Also I have it in the workbook module. It is supposed to update the date stamp on save. I think if the data has been changed or not.
View 2 Replies View RelatedIm trying to make an excel sheet as quick and easy to update as possible.
Is there anyway to add an option ( formulated button,cell etc etc) that can update the current date and time in a desired cell with just the click of a mouse?
This is for comunication as to when the info/count has been updated in the sheet.
I want to display on a spreadsheet, "last update date & time"; Is there a function to do it??
View 4 Replies View RelatedI have a label that displays the date using the = now code
[Code] .....
When I open the form the date and time is correct, but it doesn't update while the form is open. Is there a way to make the date and time always correct while the form is open.
I have a model which I have created a macro for that will do a data dump of the date when I hit 'update' (on BBG Raw Data Tab) to Column A in the 'Data for Pivot' Tab.
This works fine and all of the data comes over, except the last two data points in BBG Raw data (Cell A5055 and A5056) do not come across into the 'Data for Pivot' Tab (these should be going into Cell A5054 and A5055 of the 'Data for Pivot' tab).
is it possible to have a formula that will update todays date not by 12am but by 6am.
so if i have =now() in cell b1 and my current time is 6:05 am it should give me 21-05-2009 not 20-05-2009
i am trying to get this formula in cell f1.