I have few sheets in a workbook and last sheet named report, I update each sheet date wise except report, problem is that the report sheet contains formulas of last rows sum, if I update today date report then I should change all formulas in reports. Kindly see attached file.
View 5 Replies
I have used the function = now() to have the most updated time but it updates a workbook when I open it in the first place. How I can avoid this?
View 9 Replies View RelatedI am currently working on a button which does the following:
User wants to create a new sheet
Clicks button
Input box prompts user to enter sheet name
User enters the sheet name
The sheet is created and copies over formats and values from another sheet
I then want the user to also enter a date.
The date must then be places (always in "C2") then each second column after that the date entered + one day.
E.g. C2 = 01/08/2008 then C4 will have 02/08/2008
I want this entered for the whole month.
The code is below:
Sub copyformula()
Dim vsheet As String
Dim vdate As Date
vsheet = InputBox("Enter a sheet name:")
I have a spreadsheet that records water consumption in L/s at 5 minute intervals. I've attached an example of the data collected during January 2012.
Is there any formula that will calculate the total amount of water consumed between a user-entered date range? For example:
From: 01/01/12 00:00 (User enters 'from date and time' in an allocated cell)
To: 20/01/12 23:55 (User enters 'to date and time' in an allocated cell)
Consumption: ______ (Formula generated result in Litres)
i want to let a user enter a date and then chk if the user entered the right format.
It is not working....In order to see if works i press entered without entering any value and a TYPE MISMATCH error msg appears.
here is my
NumberEntry = InputBox("Enter Start Date", "Start Date", "dd/mm/yyyy")
Do While Not IsDate(NumberEntry)
MsgBox "The FROM date is not a valid date."
NumberEntry = InputBox("Enter Start Date", "Start Date", "dd/mm/yyyy")
'NumberEntry = InputBox("Please enter the date (dd/mm/yyyy) FROM to work with.")
Loop
how to do the formula for highlighting whole row after entering a date in one of the columns.this spread sheet had over 300 rows so I can't do the conditional formatting, I need a formula for whole spreadsheet.
View 11 Replies View RelatedIn the workbook the sheet names are month names e.g. july,august,September etc and 1st of each month is to be entered in a cell in each the sheets. By some trial and error I wrote this macro
VB:
Sub test()
Dim j As Integer, monthnr As Long, monthname As String
For j = 1 To Worksheets.Count
[Code]....
This worked in July sheet it is written as 7/1/2013 and in august sheet it is 8/1/2013 etc Then I shortened the macro like thlis
VB:
Sub test()
Dim dte As Date
dte = "july" & "/1/2013"
Range("A1") = dte
End Sub
It worked. Even if I use shortened 3 letter form of month like "Jul" or "aug" then also it works
But if type on the spreadsheet itself
="july"/1/2013
It Gives value error.
Perhaps it works only in vba and not spreadsheet.
I accept nobody is going to use "july" & "/1/2013" instead of 7/1/2013 But this will be useful if sheet names are month names so that when we write the date we can use sheet names Mine excel 2007 and windows 7.
I am entering data for ships arrived every month. There are about 200 records to be entered and for every record there are 4 date fields.
My question is : Is it possible to set default month (for ex = July) and year ( for ex = 2013 ) in these 4 cells so that
If I just type 16 it should be 16/07/2013. Because all my dates will be within that month July 2013.
I am trying to create/modify an XY scatterplot using VBA.
I declare local variables and point them to the chart and a new data series for the chart, such as:
Dim chartone As Chart
Dim chartseries As Series
Set chartone = ThisWorkbook.Charts("Chart1")
chartone.ChartType = xlXYScatterLines
Set chartseries = chartone.SeriesCollection.NewSeries()
I set the series data, using an array, such as:
chartseries.Values = Array(1, 3, 5, 7, 9, 11)
I can set the Xvalues to a set of dates by setting .Xvalues to a woksheet range that includes date-formatted data. (like this):
chartseries.XValues = Worksheets("sheet3").Range("m9:m14")
(where m9:m14) contains dates...
I am writing a module which have a different test based on for each of the previous 2 column cells. It calculate the days passed or in simple way calculate the date difference for the 2 columns and puts them in third. But i need to use a inputbox for entering the first date for monday of the month each time i use the worksheet.
When i try using the module for each cell of the column it display the input box for each cell. is there any way so that i just enter the value in input box and it can be used in rest of the module.Without using it again and again.
I have to complete information providing dates and names for a long number of individuals. Is it possible to set up the spreadsheet so that if you enter a date next a persons details in on worksheet their information is automatically updated in the relevant ones?
View 2 Replies View RelatedHow do i calculate the time between 22:00hrs and 08:00hrs without entering a date? Is this possible or do i need to enter a date?
View 9 Replies View Relatedi have this macro that sorts out a few cells
View 4 Replies View RelatedI am working on a chart which is updated every week. For clearness purposes, I would like to get the chart titles integrating the date of the last update. For instance, if the data are updated on the 13/06/07, I would like the chart title to be automatically: Last updated on 13/06/07 and so on.
View 4 Replies View RelatedI'm trying to update an excel document which has a list of employees on it along with their training. Most of the training for individuals needs refreshed in the next year so wanted the table to use the date and perhaps trigger a fill colour change once they are close to needing that training. here's an example
John Smith
course 1
Completed 01/05/10
Refresher required 01/05/14
Once we get a month or two before the required date, I would like the fill colour to change to highlight that they refresher training should be organised soon.
Excel Forum.jpg
So I want the SUM of the total from a certain range of dates to go into the Week Columns on the right. I'm gonna manually select the date ranges for each Week but how can I set up a formula to Sum the Totals at the right of the table based on the Date Column.
In I2 cell, I have date in below format.
[Code] .....
I want Excel to automatically update the date in Column N2 with MM/DD/YYYY format.
This would go on until last row in I column.
I want the system to update the date or date and time in some particular cells when i am updating /using a particular. i written a code
But neither gives an error nor it gives any values. my code is below. Also i want the time details to be fixed meaning once i enter cell a1
it produces the current time / date , it should not be editable again
[Code]...
Found this macro in a differant thread for a date stamp in A1. I changed it to C38. Also I have it in the workbook module. It is supposed to update the date stamp on save. I think if the data has been changed or not.
View 2 Replies View RelatedIm trying to make an excel sheet as quick and easy to update as possible.
Is there anyway to add an option ( formulated button,cell etc etc) that can update the current date and time in a desired cell with just the click of a mouse?
This is for comunication as to when the info/count has been updated in the sheet.
I want to display on a spreadsheet, "last update date & time"; Is there a function to do it??
View 4 Replies View RelatedI have a label that displays the date using the = now code
[Code] .....
When I open the form the date and time is correct, but it doesn't update while the form is open. Is there a way to make the date and time always correct while the form is open.
Attached simplified sheet gives background - but need to update the cells in the aggregate monthly table C44:C55 based on data in single cell above, and according to the correct month. Need do this without the previous months data changing.
Month is determined by cell E8 and data to be updated to the agg month range is to come from cell C15. The month date will change automatically as will the data in C15.
I have a model which I have created a macro for that will do a data dump of the date when I hit 'update' (on BBG Raw Data Tab) to Column A in the 'Data for Pivot' Tab.
This works fine and all of the data comes over, except the last two data points in BBG Raw data (Cell A5055 and A5056) do not come across into the 'Data for Pivot' Tab (these should be going into Cell A5054 and A5055 of the 'Data for Pivot' tab).
I'm attempting to force excel to auto update the day of the week, and the date in a spreadsheet. The date isn't as important, since it can be hard coded. The only problem there is some months have 31 days, some 30, and another with 28. I've uploaded an image of the spreadsheet, and you can see in field A1 the date/year is input. I'm wanting to find a way to force the days/dates in fields 2E and 3E to update based on the month.
View 9 Replies View Relatedis it possible to have a formula that will update todays date not by 12am but by 6am.
so if i have =now() in cell b1 and my current time is 6:05 am it should give me 21-05-2009 not 20-05-2009
i am trying to get this formula in cell f1.
I have a similar issue, but it's with a date field. Every day, I go in and check the current day to show the current days data(on a Pivot table). Is there a way to modify this code so the AutoFilters update and "check" up to the current day?
View 2 Replies View RelatedI need to use Options>View - Zero Values.", "style="background: #FFFFFF;padding: 2px;font-size: 10px;width: 550px;"");' onmouseout='GAL_hidepopup();'>formatting-limit.htm" target="_blank">conditional formatting with more than 3 conditions. I have found a result for this when the formatting is being done to the cell containing the number but I need a different cell to be formatted. For example:
am pm
xx
xx
xx
xx
xx
xx
66
I need the cells marked by an x to go different colours depending on what number is in the final row of each column.
I need is to be able to have a button show up on an Excel spreadsheet that you push to update the DAY and TIME to today. But, I need it to stay in a protected field so that it doesn't accidentally get changed by other users who open it up. And we save these for retention purposes, so if I open it a couple days later, I need the date to stay as the date I edited it on.
View 4 Replies View RelatedI am currently using:
=TODAY() and
=NOW()
to enter date/time on a sheet that is used to create a printed form. I want to ensure that the date/time are current when the form is printed, but they will actually only reflect when the workbook was opened. So, if the employee opens the workbook, then takes a break or answers the phone, when he prints the sheet the date/time may be wrong.
I need to have the worksheet either:
1. actively update the date/time information constantly
2. update it before printing,
3. or possibly have the workbook "time out" and close if there is no activity for 60 seconds or so.
I already have code entered to prevent a "do you want to save changes" promt when closing. And I am using a command button for print which closes the workbook automatically once the employee prints the form (to ensure that all other data is entered fresh everytime the workbook is used).
