I have more than 10 textboxes. I would like to filter the data on another worksheet base on which textbox the user clicks on. I have tried the Worksheet_FollowHyperlink event, but it does not work with the textbox hyperlink.
View 5 Replies
I am having a slight problem copying hyperlinks. I have written some code that sorts data by date and then creates a simple diary. It originally placed the name of the event in the new diary sheet. What I would like to do is instead of copying the name into this new sheet copy a hyperlink that I have created to the company's website for that event.
I can create the hyperlink using hyperlink(B1,A1) where A1 is the company name and B1 is the web address but since the new sheet will not have the underlying data I need to actually copy the values and format of the hyperlink rather than the formula.
Another interesting dilemma to solve. Using this formula:
View 2 Replies View RelatedI'm creating a tool for some of my colleagues to use at work. So far, I have a series of check boxes setup that get the user determine if this is the proper tool or not. Once the appropriate check boxes are filled, I'm trying to get excel to give the user a link to the next step.
I have =IF(AND(followonconst=TRUE,Commercial=TRUE,fixedprice=TRUE),?????, "This tool cannot be used")
The names within the 'AND' operation are the references to the output of the check boxes, and all three must be true. What I'm trying to figure out is what I need to put where the question marks are.
Here's what I want to happen...Once all three boxes are checked, I want a link to show up that takes them to another tab in the same spreadsheet. Here's another possible hitch though, the users will likely save this tool into who knows what directory and rename it all sorts of things.
I am trying to hyperlink a cell to a file which contains a "#" in its name e.g. "AngloGold #1.xls"
Excel converts this to "AngloGold - 1.xls"
I have tried "AngloGold%20%231.xls", but that doesn't work.
When the value of E2 changes it does not refresh the hyper link value, any thoughts why
=HYPERLINK("E2","Click to View "&E2& " Full Report")
I am performing a vlookup in a worksheet and want to retrieve a hyperlink displayed on another worksheet in the same workbook.
The Vlookup finds the item I am looking for, but the hyperlink comes in as text. Do I need to perform the vlookup differently when trying to retrieve a hyperlink?
why no formula based hyperlinks will work in my workbook. even the simplest formula's. either it returns "cannot open specified file" or it does absolutely nothing even though the cursor acknowledges its a hyperlink.
View 5 Replies View RelatedI'm having a problem with the HYPERLINK function. I am trying to make jumps from an index sheet to the large worksheet with all the actual info in it. The name of the file is SKU and the large info sheet is also called SKU. First I took the SKU sheet and numbered the rows (="A"&CELL("row",A1)), then in the index worksheet I created a VLOOKUP that finds the corresponding chapter title and returns that value.
Worksheet 1
A B C
1
2 100 =VLOOKUP(A2,SKU!$A$1:$B$3,2,FALSE) ="[SKU]SKU!"&VLOOKUP(A2,SKU!$A$1:$B$3,2,FALSE)
3 150 =VLOOKUP(A3,SKU!$A$1:$B$3,2,FALSE) ="[SKU]SKU!"&VLOOKUP(A3,SKU!$A$1:$B$3,2,FALSE)
I used the HYPERLINK formula in column D: "=HYPERLINK(C2,A2)" and it returns something that looks like the right thing but the link won't open.
I'm trying to create a hyperlink that takes a user to a specific cell (or range of cells) in an external workbook, and I've run into bit of a roadblock. I've discovered that using the method:
=HYPERLINK("[\serverfolder....file.xls]worksheet!range","message")
works just fine as long as there are no spaces in the worksheet name. Unfortunately I am trying to link to an external worksheet with spaces in the name (which I am not allowed to edit).
I'm using the following UDF to extract URLs from hyperlinks on a sheet, so that people can click the hyperlinks, but the URLs for all the links also appear (in the cells with formula =GetUrl), but in a place where they're accessible but out of view:
View 2 Replies View RelatedBasically my sheet links may appear as a cell in another tab or it might be to an http address... Here is my formula I have setup up right now.. Only problem is, no matter what I put into the logical test to get a "true" result for the http addresses it still says false..
View 2 Replies View RelatedIs it possible to use the HYPERLINK function inside of a validation list?
Presently I have a dynamically named range on another worksheet that includes a hyperlinked term. When I attempt to create a validation list using this named range the term appears in the list without the hyperlink.
I have a table which says that this is the amount of coloured cells we have in another sheet.
For e.g.
Field Name Code A
Item Description 5
Now, the item description column has 5 cells in another sheet which are filled in with "Yellow" Colour. So what i want to do is to click on this 5 in sheet 2 in this case as per the attached sample which takes me to the filtered result on sheet1 of 5 yellow coloured cells under the column of Item description including an additional filter of Code "A"
I'm currently working on a problem that I'm having with Hyperlinks. Basically I want to copy the destination data that the hyperlink points to onto another sheet.
The main problem I'm having here is that I cant seem to find a suitable method to do this....I had the idea of using the hyperlink.follow function and then copying the data once I'm there and then moving back to the source hyperlink. My only problem with that is that I dont know how to find the cell address that the hyperlink is in, once I have found that hyperlink.
Therefore my question is two-fold:
- Is there a way to copy the destination data using some sort of hyperlink function?
- If not, is there a way to find the cell address within a worksheet, once a hyperlink is found on that worksheet?
I've attached the spreadsheet below to give a better idea of what Im doing, along with the "findHyperlinks" macro,within that workbook, that I am currently working on.
I wrote a macro coding to filter data from active sheet from specific companies by company ID that I inputted in the other sheet named "ID". The company ID only contains list of numbers. When I run the macros, it filtered out all the values even though some of the ID that I inputted in the sheet named "ID" present in the data. Below is my coding;
Sub FilterID()
Dim vCrit As Variant
Dim wsD As Worksheet
Dim wsC As Worksheet
Dim rngCrit As Range
Dim rngData As Range
[Code]....
I have a table that is filtered A1:C21. When column A is filtered to say list all "A" only it returns three rows etc.
What I want in cell E1 is the MAX value of column C whether the list is filtered or not.
i.e Filtered to "A" then cell E1 would display 108.
************************************************************************>Microsoft Excel - Book1___Running: 11.0 : OS = Windows Windows 2000 (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCD1SELECT AREANameTotal Hrs. 2ASteve Wilde70.5 3ADave Bond71 4BBrian Massiter75.6 5BTony Newman80.1 6CMick Young80.5 7BCraig Montague81.3 8DKevin Walton82 9CJimmy Miller84 10BKeith Mason85.4 11DDave Soulsby90.5 12CKeith Ward94.5 13DAndy Dix98 14CPhil Watson100.8 15CGavin Gallon101 16BDerek Cuthbertson104.4 17ARay Kenney108 18EAndy Hutchins110.1 19BTrevor Pearman130.85 20BColin Dean149.4 21ESteve McDonald268 Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I have two sheets open in Excel, the second sheet contains a huge list of data. I am trying to make a workbook that lets any user select from several dropdown lists and in the end, displays the (in this case) recommended material to use (and if possible the 4 best choices). The user will select from dropdown lists what the environment the material will be exposed to, the minimum required temp, and the maximum required temp.
View 1 Replies View RelatedI currently have a column of data by month for the years 2013 to 2025. I want to show only dec, jan and feb of each year. I am currently using the filter function but I can only select one month at a time.
View 2 Replies View RelatedI have an Excel sheet with a few thousand rows which I would like to filter by a column with the name TrackingID. This column contains values like:
12AA1
23452BA2
234AA1
345635CA2
...
I would like to filter this column by the third character from the end (which is always a letter from the range [A-Z]). In the example above, this would be:
A
B
A
C...................
I have a recorded a macro to create a Pivot table from my data. In this Pivot I have to make the report filter field to filter the dates from the current month only. Is there a way that I can instruct my macro that in that filter it automatically filter the data from the current month range.
View 1 Replies View RelatedI have a spreadsheet that has filters in it. I want to randomly select one of the lines that is still visible.
View 3 Replies View RelatedI am trying to use the AutoFilter/Custom function in Excel (it is available under the Data Menu). It offers me two conditions/criteria that I can apply using and/or. For eg:
Filter:
does not begin with - 3
and / or
does not begin with - 9.
I want to add a third 'and' criteria .. is it possible, and if so, how?
The column that I am trying to filter has numbers formatted as text.
when using ato filer and I select an item id like to look I try to sum up the total at the bottom but it doesnt give me the correct answer.
So now i am manually soring and going through the data to get the correct totals.
I have a worksheet with 6000 rows (W1), and another with 2500 rows (W2).
I need to check whether the values of W2 are found in the second column of W1. As in if(iserror(search(valuex,worksheet2!B2)),"",A2) ---> resulting in something like:
If the value is found in the cell B2 of column B on W1, then return its reference which you find in A2, otherwise leave a blank.
I need to check all 2500 values in all 6000 rows.
I know for sure that I will have limited hits (max of 200) so I would like to create a list on W2 (the values) where I check if they are found in W1 and return only the 'hits'. I would like to filter out the blanks.
YOu can filter the blanks, I know, but you need to have a 'full' version (I thought) with all the blanks and the hits and then and only then you can filter.
But is there a way how I can use the advanced filter, with a criteria range using a function. Something like: criteria range --> if(iserror(search(valuex,worksheet2!B2)),"",A2) is not equal to "".
I created a large table with data (1700 lines long) and am looking to create a sheet that will use it to do a call for totals whilst filtering for a specific line.
This is what I have currently, filtered by delivery date and key ("furniture desc").
The 58 and 54 are totals for that particular product which I would like to ideally see on a separate sheet.
result1.JPG
result 1a.JPG
What I would like to achieve is this: result2.JPG
What kind of formula would I need to use to first filter by date, then by key, then to tally up the quantities and drop them on another sheet?
Bearing in mind that other keys are intertwined on the Y axis so I can't use =SUM(xx:xx)
Data: four variables A,B,C and D from A2:D6000
I want a count of unique D values
when A=xxx
and B=yyy
and C=zzz
I have named the A,B,C,D ranges as RangeA, RangeB, RangeC, RangeD
I have used the function
=SUM((RangeA="xxx")*
(RangeB="yyy")*
(RangeC="zzz")*
But what do I use to count-unique values of variable D ?
=SUM(IF(FREQUENCY(RangeD,RangeD)>0,1)) doesn't work.
=SUM(1/COUNTIF(RangeD,RangeD&"")) doesn't work either
They don't work because D can occur during different combinations of A,B and C. In other words, the D value of 'Smith' can, and does, occur when A is 1,2 or 3 and additionally when B is Pass, Fail, Withdrawn.
They "don't work" because I can use filters on A, B, C and D to see what the correct answer should be .. and the function doesn't return the correct answer.
I hope I've explained this ok - I've been searching on several excel-help websites for 2 days now and one of the days my client is going to want some results.
In an excel sheet, I am using a macro to filter. Macro code is as follows. When I run this macro, it returns 4 rows matching the criteria from 560 rows in the excel sheet.
VB:
ActiveSheet.Range("$A$1:$I$566").AutoFilter Field:=1, Criteria1:= _
">=11/11/2012 22:13", Operator:=xlAnd, Criteria2:="<=11/12/2012 6:47"
I want to use the same criteria in the vb.net code, to do same thru vb.net. But, when I run the same code in vb.net, it just returns only 1 row (1st row only).
VB:
[FONT=Consolas][SIZE=2][COLOR=#0000ff]xlsRange1.AutoFilter(Field:=1, Criteria1:=">=11/11/2012 22:13", Operator:=Excel.XlAutoFilterOperator.xlAnd, Criteria1:="<=11/12/2012 6:47")
This returns 1 instead of 4 expected.
I have following data to sort/filter
Sector
Flt no
origin
[Code]...
Is this possible with excel functions?
How to use COUNTIFS Function only for the visible Data after applying filter.
Ex:=COUNTIFS(A:A,"Ret",P:P,"M")-COUNTIFS(A:A,"Ret",P:P,"M",B:B,"") it gives d result including hidden data, but i want it only for visible data after applying filter.
