I currently have a column of data by month for the years 2013 to 2025. I want to show only dec, jan and feb of each year. I am currently using the filter function but I can only select one month at a time.
View 2 Replies
Is there any way to select specify month of the many years of data with any function?
View 7 Replies View RelatedI am working in a spreadsheet that contains a bunch of data, it is not limited, and varies. It has some fiels such as: name, date of birth, address, and others. I am interested in creating a column with only the month digit of the date of birth for each row.
I have been working with some code, I am not quite sure how to continue. The following table would be a example that I have of the data, it has only to entry in the column of Date of Birth, but my data range will always vary. I want to get the month and past it in the next cell that is available in this case would be column c or 3... The worksheet name is REP.
VB:
Dim Cell As Range
' 1st cell with the posting date
Set Cell = Range("A2")
Do While Not IsEmpty(Cell)
If Cell = "Date" Then
[Code] .....
I would like to create a monthly inventory, based on workdays (Monday - Friday)Myrna Larson has a formula that I would like to use with the workday function, but I don't know how to combine them.
=IF(A1="",A1,IF(MONTH(A1+1)=MONTH(A1),A1+1,""))+ = workday
to fit on the page, I need the dates to be from the 1st to the 15th, and 16th to the 31st. I am not sure how to write this either.
function in a spreadsheet that will list all of the days in
a given month automaticaly with the entry of the 1st of the month only.
Ex;
10/01/05 entered dated
10/02/05 auto fill
10/03/05 "
. "
. "
10/31/05 end of auto fill
I would like the function to stop filling dates at end of the month even for shorted months such as Feb.
I am trying to write a code that runs on a worksheet/workbook activation that will copy data from one sheet to another based on which month it currently is. I can easily do this with a Command Button. Here is an example of what I'm looking to copy from sheet to sheet.
Sub Jan_Button()
' UnProtect
ActiveWorkbook.Unprotect
' Deactivate Screenupdating
Application.ScreenUpdating = False
'January
'Rolling Month From Pool to PVT Calc
With Sheets("Pool")
.Visible = True
. Range("V2:W11").Copy
.Visible = False
End With
I will be pasting to the same location each month but I will be copying from another range of cells as my targets change every month. This is where my autoupdate idea is coming in. I hoped that for example this month is August so it would automatically paste over Augusts Data and when September came around it would automatically update to the new data set.
I want to be able to show only the dates whose months are selected in the drop down in cell A1. I've been able to do this with a Macro that I must run every time I change A1; however, I was wondering if there was a way to have the macro done automatically. I've been trying the Worksheet_Change options with little command. In addition to all of the If/Thens, I've also tried the If/ElseIfs as well:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$A$2" Then
If Target = "January" Then
ActiveSheet.Range("$A$2:$C$14").AutoFilter Field:=1, Criteria1:= _
xlFilterAllDatesInPeriodJanuary, Operator:=xlFilterDynamic
[Code] .....
I have a workbook with multiple sheets , final sheet has a data of all sheets , in the first sheet i want to select what results to be shown in that final sheet ,, specially the week and the LDM
View 12 Replies View Relatedi just want to select first four column cells(A,B,C,D) in first row after filte the data.
View 1 Replies View RelatedI have a workbook and have created a filter across range A1 - BU1. I want to filter column BQ. In this column I want to use the filter to show all values except for 0.
View 2 Replies View Relatedhow to get a selective cell range after i apply a filter,
I have it currently that it will copy the data shown but i don't want it to copy if there is no data present?.
ub Ding*****urn()
' Ding*****urn Macro
Sheets("Master").Select
Range("D1:E1").Select
Selection.AutoFilter
ActiveSheet.Range("$D$1:$E$800").AutoFilter Field:=1, Criteria1:= _
"DINGLES BOURNEMOUTH"
ActiveSheet.Range("$D$1:$E$800").AutoFilter Field:=2, Criteria1:="MENSWEAR"
Range("A2").Select
[code]....
when i comes to the selection i only want it to copy cells that represent a value within that filter not cells that are blank?
The data is has the following structure:
ID no | Name | Group | Organisation | ...A load of data metrics...
Currently I'm using a standard combobox to select which row of data to analyse - this is based on the concatenation of the persons name, their group and their organisation. What I would like to do is to:
1. Be able to select more than one person
2. Be able to select all/some people from the same Group and Organisation and get their data - e.g. filter the data so that only data for one group is shown and then be able to select one or more names from that group to analyse the data for
I am trying to create a combobox to filter a set of data by the month that is entered.
The below code worked fine when there was just the month entered, but now all the entries in the sheet are in the format 01 January 2009. So I need a section of code which will search for the combobox value as part of a string in my range.
The cbodate values are Jan, Feb, March etc ....
how to select, for example, 10 consecutive options that follow each other within the filter drop down box? (instead of individually clicking/checking each option) for example, clicking a cell A1, pressing and holding shift, and clicking cell A10, which highlights cells 1 - 10...
Is something like this possible within a filter drop down box?
There are two columns of data. Column A is "Group name" and is initially empty. Column B is a list of words
Here is what I am trying to do:
1) prompt the user for 3 input values
2) input value 1 and 2 are COMMON words that i wish to filter through in column B with "filter contains" value 1 or value 2
3) after the filter, i wish to select ALL VISIBLE cells in column A and append the Group Name to each cell
I've never worked with Excel macros prior to today. I'm working on this for a friend.
I've got this sheet that's going to a web address, importing a table from the page, and making a line graph of the data. I got all that to work fine (after a lot of trial and error). Now I've got the data, and I want to make a scatter plot of it...
Here's the thing. I want each month of the data represented as a line on the plot.
This is hard to explain. It looks like this:
[url]
So from there, I want a loop to scroll through the dates and select a range that represents January, a range that represents February, etc, so I can save those ranges as variables and make a scatter plot with 12 curves on it.
Here is the code I have so far, in case you want to see it, not sure why you might need to though.
I'm trying to make a simple program to allow me to total the amount of air filters I need to purchase for a given month. I am entering the amount of filters for each property and the frequency of replacement ie. monthly, quarterly, one month out of the year, etc. I would like to enter a month, ie. 2 for february and have the program list the quanty of each filter that I need to purchase for the given month. See sample attachment.
View 3 Replies View RelatedI'm currently using the following:
[Code] .........
However, i'd like it select the field ie 2-17 based on a year in a cell on another sheet "x" in cell E3.
At the moment i have a row of numbers 1-17 above the corresponding field cell so for example the number 15 is attached to the year 2013 (although this is dynamic).
I just cant work out how to get the autofilter to select the number that matches the cell in "x" E3 with the same value in T2:AJ2 on filter sheet and then filter the column that matches.
As I have not tried to do this yet this is a hypothetical scenario. Imagine that a column, when filtered, gives cell values such as 3,6,9,12,18,24,36 ..and so on. Is there a way to select, say 12, and then see all the other values that are divisible into 12. e.g. all rows that have 3,6,12. Another example- select 36 and see 3,6,9,12,18 and 36?
On the attached example sheet, column 'O' will be filtered.
I am looking for a way in VB to select and unselect items in the list for filters generated in a pivot table.item list. Ho do I do that?
View 5 Replies View RelatedI am looking for a formula that will select a date in the month based on certain criteria. Found the choose function but not sure if I can really get that to work. I basically have a list of clients, with zip codes, restricted days of the week - and would like the system to group them by zip code and select the best day of the month to schedule an inspection but not pick he restricted day. The goal being have zip codes scheduled together - but on a day other than garbage day. Is this even doable?
View 2 Replies View RelatedI'm trying to use a List Box to select multiple items on my Pivot Table but I can't seem to get it to work. Its the Report Filter part of the pivot table.
When the list Box is set to fmMultiSelectSingle it work and selects the indivdual items, but I need it set as fmMultiSelectMulti for if i'm also needed to select multiple items. (which doesn't seem to work!)
I have a spreadsheet which is used by users unfamiliar with Excel. They are using the filter to select records, however when this is used some records appear which have no entry in the cells of that column. Can I overcome this? There is no data in the blank cells, other than a data validation drop down.
View 1 Replies View RelatedI wrote a macro coding to filter data from active sheet from specific companies by company ID that I inputted in the other sheet named "ID". The company ID only contains list of numbers. When I run the macros, it filtered out all the values even though some of the ID that I inputted in the sheet named "ID" present in the data. Below is my coding;
Sub FilterID()
Dim vCrit As Variant
Dim wsD As Worksheet
Dim wsC As Worksheet
Dim rngCrit As Range
Dim rngData As Range
[Code]....
I have a table that is filtered A1:C21. When column A is filtered to say list all "A" only it returns three rows etc.
What I want in cell E1 is the MAX value of column C whether the list is filtered or not.
i.e Filtered to "A" then cell E1 would display 108.
************************************************************************>Microsoft Excel - Book1___Running: 11.0 : OS = Windows Windows 2000 (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCD1SELECT AREANameTotal Hrs. 2ASteve Wilde70.5 3ADave Bond71 4BBrian Massiter75.6 5BTony Newman80.1 6CMick Young80.5 7BCraig Montague81.3 8DKevin Walton82 9CJimmy Miller84 10BKeith Mason85.4 11DDave Soulsby90.5 12CKeith Ward94.5 13DAndy Dix98 14CPhil Watson100.8 15CGavin Gallon101 16BDerek Cuthbertson104.4 17ARay Kenney108 18EAndy Hutchins110.1 19BTrevor Pearman130.85 20BColin Dean149.4 21ESteve McDonald268 Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I have a table in which we track our daily issues.. A1 - A6
Resource/Subject/Date/Time Of Failure/Escalated/Tech Int
I want to be able to count the amount of escalations we have per month...
We just enter a Y or N for the escalation field.
I'm not great with Excel and can do a count with the COUNTIF but don't know how to separate my results so that the count is done per month..
Can someone point me in the right direction?
*EDIT* Also my date format is as follow's 04-Jan-07. Should I change that to make it easier to calculate the results?
I have more than 10 textboxes. I would like to filter the data on another worksheet base on which textbox the user clicks on. I have tried the Worksheet_FollowHyperlink event, but it does not work with the textbox hyperlink.
View 5 Replies View RelatedHow to use the Month function in VBA but am not getting the results I expect after reviewing other websites.
I'm running MS Excel 2007.
Simple example:
the worsheet cell, A1 has "5/14/2013" , cell format is DATE
I want to get the month as a number. I know that year(cells(1,1)) results in 2013 so in the immediate window, I try
?month(cells(1,1))
?month(range("A1"))
Both result in Run-time error '13' Type Mismatch.
What am I misunderstanding about the Month function?
I entered a pretty easy formula to pull the month from a date:
=MONTH(C23)
, where C23 = 12/11/2013. This returns the expected output of 12.
However, when I convert it to text:
=TEXT(MONTH(C23),"mmm"))
It outputs January instead of December. I am so confused, why would Excel 2010 return bogus output in this regard? I mean, I can use the =MONTH formula.
I have a column titled "Start Date", "Month/Year", &"Total". I want to count the number of dates that appeared in the "start date" column that have the same month and year of the "month/year" column. That count should be in the total count. For ex, I want the first total (april 2008) to be 1, the second (may 2008) to be 1, and so on. I tried using countifs month and year of the start date is the month and year of the month/year column. Not working.
Here's my data: ....
