I have a row of cells, say, A1 to G1. I wish to sum the values in cells, say, A1, C1, F1 and G1 only. The chosen cells can have values 0, >0 or Blank. How do I sum the values and ignore the blank cell(s) without getting #VALUE!? Filling the blank cells with "0" is not an option.
(Any blank cells may have a value added at a later date).
Edit: I could use multiple 'IF' statements, but this is cumbersome. There must be a simpler way.
The first tab has raw data - The second is my summary. TAB1 -includes column A = name range column B = Evaluation Result 1 % column C = Evaluation Result 2 % column D = Evaluation Result 3 % column E = Evaluation Result 4 % TAB 2 on...The remainder of the tabs are summary for each name in column A of Tab1. each summary tab includes A3 = name A7 = Evaluation Results 1 A8 = Evaluation Results 2 A9 = Evaluation Results 3 A10 = Evaluation Results 4
The evaluation results can include any % from 0-100 and can also be blank. I need to count the 0 but ignore the blanks so for example on Evaluation Result 1, Im using
So I can find the name in the list of names and the % score for the evaluation - however I don't know how to ignore the blank cells. If the cells are blank I would like to see "-". if they are 0% I would like to see the 0%.
In cell C1 I hace A1-B1 and in cell DI want to display the status of the cell C1 like this : =IF(C10 ; "NOT OK" ; "OK") This means that when the value of the cell C1 is different then 0 cell D1 will display "NOT OK" and if the value of cell c1 is 0 then D1 will display "OK".
The PROBLEM: Because the cell C1 contains a formula (A1-B1) the D1 cell will display "NOT OK" even if the cell C1 doesn't show any number.
I have a spreadsheet for which I have to set up a formula to get the minimum value from a range of cells, but that range can include blank cells, errors (#DIV/0) and zeros, all of which I want to be ignored. I can work out how to ignore EITHER the zeros
or the error cells
How to exclude both. If I try to combine both of these exclusion criteria it doesn't work and I end up with the answer #DIV/0, which is one of the values I want it to ignore.
I have tried to set up a list of cells to highlight in red any numerical values which are greater than 0 using conditional formatting. This works fine, except that all blank cells are also highlighted in red. Formula is currently: cell value is greater than 0. What do I need to do to ignore the empty cells?
I'd like to give a conditional format to a range of cells so that only one cell in the range has a gray background. The condition must include three criteria: 1) The cell cannot be blank, AND 2) The cell's value must be the minimum in the range, AND 3) The cell's value must not equal any value preceding it in the range.
My own attempt looks like this for cell J8 in the range C8:AF8: =AND(NOT(ISBLANK(J8)),J8=MIN($C8:$AF8),J8$C8:I8)
Problem: This condition works great for all values entered EXCEPT ZERO. When J8 is the first zero in the range, if it is preceded by a blank cell anywhere else in the range, it fails the third criterion (J8$C8:I8) because Excel treats the blank cell as though it's a zero. Result: no gray background.
Attached is a spreadsheet I am working on that has a series of graphs with defined dynamic ranges. I am having 2 separate issues on 2 different tabs.
1) Ranges named AirRecBra4 (and Bra10); AirComBra4 (and Bra10); AirRemBra4 (and Bra10) are not pulling in data from the correct data points. Instead of using the last 26 data point, they are currently beginning at the top of the column (currently cells 11 to 36 is their respective columns). The formulas are copy and pasted from working offset ranges in the same tab but are reading differently.
2) On the last 6 tabs beginning with Stn Backlog, I want to have defined formulas beginning in cell B119 and continuing downward to at least F200. However, when I add the formulas, the offset reads the formulas as being data and adjusts for that. I do not know how to adjust the dynamic range to ignore formulas in blank cells.
Global Demand-Capacity Management_working (version 3).xlsm
I have the following formula which counts number of days between dates in two adjacent cells excluding holidays
The $AA$4:$AA$14 refers tote range where the excluded holiday dates are stored.
I have included the -1 at the end as it over counts by one day every time. i.e. if the same date is in both cells it counts 1
However if no date is in both fields it count -1 (minus one)
If a date is just in one field it counts a very high number, example below.
20/06/2014 08/07/2014 12
is there a better formula to use for this? How do I get the result to show ZERO when both cells are empty? can I get the result to show number of days to present date where there is only a date in first column?
I have a worksheet (Data) that lists when pupils are in for Nursery sessions during the week. If they are in they have a 3 (hours) by their name in the relevant columns.
In the AM worksheet I now need to pull through a "register" so under each daily heading I need to pull through everyone that has a 3 next to their name under Monday AM / Tuesday AM / Wednesday AM etc. from the Data sheet. However, I don't want it to copy any blank cells. I then need to do the same for the PM sheet.
In the below code, in the event that a textbox is blank, I get an error. I tried using the "VAL" function but that didn't work as I had anticipated. Is there a function that will allow me to bypass the blank textboxes? I am sure there must be an easier way than an IF statement that validates each textbox, right?
Private Sub CommandButton1_Click()
Dim v As Long, w As Long, x As Long Dim y As Long, z As Long
v = Me.TextBox1.Value w = Me.TextBox2.Value * 350 x = Me.TextBox3.Value * 400 y = Me.TextBox4.Value * 400 z = Me.TextBox5.Value
Me.TextBox6 = Format(v + w + x + y, "##,#0.00") Me.TextBox7 = Format(Sqr(Me.TextBox6.Value) * 4, "##,#0.00")
I have set up a formula to count the occurrences of multiple conditions in a table of data (see below..) the formula reads from 4 cells of criteria but I will not always use the 4 criteria and maybe only need to use say 2 criteria - when I do this my formula doesn't work - my example below shows this... How do I make the formula continue to work when some criteria cells don't have any entries?
This table is a simple example but my main work will have a much larger table (poss. several thousand rows) and probably about 10 criteria cells, so running a big formula with 10 nested IF statements will be too cumbersome... any smart workround for this within the SUMPRODUCT formula?
I am attempting to consolidate multiple worksheets into one. The consolidation works fine on worksheets that have data however, as in my example file, there are worksheets which are presently blank (empty of data) - save for the header row.
On consolidation, the header row from the "Empty" worksheet becomes a row in the "master" worksheet that is created. How can a worksheet without data be ignored on consolidation?
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
I presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
I have a column of numbers and want to make sure everything has been entered correctly from our scanning software. Basically, I want to automatically highlight any cell that has any letter in it (e.g. z12o2 instead of 21202 or R705 instead of 5705), ignoring any cells that contain only numbers. I haven't had any luck using conditions based on formulas like =ISTEXT.
i have this code which inserts blank rows in alternate rows,
Code: Sub insertrow() ' insertrow Macro Application.ScreenUpdating = True Dim count As Integer Dim X As Integer For count = 1 To 20 If activecell.Value "" Then activecell.Offset(1, 0).Select
what changes should i make in this code to insert rows only when ther are now blank rows. So first time i run, blank rows are already there, and when i update some data at the bottom and re-run it inserts blank rows again.
I need to combined all non blank cells in a given row into 1 cell. But within each row i have 5 phases that the values fall into, which is denoted by the 1st charter 1, 2, 3, 4, or 5. for example, in a given row i have 1-a, 1-c, 2-d, and 1-f and these values occurs in non consecutive columns starting from G to ALR. I need a macro that sorts these values in one of the 5 phases. So in another sheet the macro would combined [1-a 1-c 1-f] in Phase 1 and [2-d] in phase 2. and if there are other phases it would put them in the appropriate cell.
See attached workbook : Work Order Summary Sheet.xlsx
However, in addition to what the macro already does, it is possible to add another work sheet in the same work book that outputs the values in separate cells? It also has to output the data in order: for example, in the first work sheet the data is inputted at random and has spaces but the macro will have to remove all the blank cells and output them in order based on the first value in the test string, 1, 2, 3, 4, and then 5;
I have a graph that references a column which contains a formula. In the instances where this formula produces a zero value or a DIV/0 error, I would like the graph to contain a blank space.
As it is now, the zero or DIV/0 cell graphs as a zero value. I have tried using an IF statement which takes any zero or error and replaces the cell value with "": IF(A5/A6=0,"",A5/A6)
Even though the cell comes up as blank... a zero value still appears on the graph. The only way for me to have the graph ignore that cell is to go into the cell and delete the formula. This is unnacceptable b/c the data is updated daily... I do not want to have to go through my data every day and delete cells.