I have this formula which is counting the number of cells in a column that fall within each calender month.
However, if there is a formula at the bottom of column B and C that yield a "", the formula breaks.
In my workbook, B/C:133 have a formula =""
I will need the formula in column E to work if there is a formula that yields a "" in column B and C.
I want to use this count function =COUNTIF(A$1:A1,A1) , but don't count blank cells, if cell is blank answer is 0 zero .
Sheet1 AB10.6127.813 041.215 06 071183190.621020.91114112 0137.82143.91150.63Spreadsheet FormulasCellFormulaB1=COUNTIF(A$1:A1,A1)B2=COUNTIF(A$1:A2,A2)B4=COUNTIF(A$1:A4,A4)B7
=COUNTIF(A$1:A7,A7)B8=COUNTIF(A$1:A8,A8)B9=COUNTIF(A$1:A9,A9)B10=COUNTIF(A$1:A10,A10)B11
=COUNTIF(A$1:A11,A11)B13=COUNTIF(A$1:A13,A13)B14=COUNTIF(A$1:A14,A14)B15=COUNTIF(A$1:A15,A15)
I would like to count the number of cells that contains a date in each month.
I have attached my workbook here: Book2.xlsx
I need to count the number of non blank cells in a column and add a text string to the result to show, for example, "75 Clubs" as the result. I have tried "=Count(A1:A90) + Clubs" but this does not work.
View 2 Replies View RelatedI have a spreadsheet that contains given answers to a multiple choice test. I want to count the number of times each possible answer has been chosen at the bottom of the column. I have tried to use COUNTIF and that works fine to give me the number times each answer has been chosen but there is just one annoying thing. If the given answer hasn't been chosed by anyone, a "0" is automatically entered into the cell. This tends to really clutter up the spreadsheet and I would prefer for the cell to be left blank if the answer hasn't been chosen by anyone.
The closest I can come up with is: {=IF(D1:D10="","",COUNTIF(D1:D10,"A"))} but unless the answer "A" is chosed in D1, the cell remains blank.
If "A" is chosed in D1, then the formula works and counts all the rest of the cells that have "A" as an answer.
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
Getting a formula or macro that count the number of blank cells between 2 cells with data (numbers) in 1 column. E.g.
1
Blank
Blank
2
Blank
Blank
Blank
3
...
In this case the blanks between 1 and 2, between 2 and 3 to be displayed in an adjacent column.
Ok so my named range looks like this:
[Code]....
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
I have a spreadsheet for which I have to set up a formula to get the minimum value from a range of cells, but that range can include blank cells, errors (#DIV/0) and zeros, all of which I want to be ignored. I can work out how to ignore EITHER the zeros
(=MIN(IF(C10:G100,C10:G10)),
or the error cells
(=MIN(IF(ISNUMBER(C9:G9),C9:G9)),
How to exclude both. If I try to combine both of these exclusion criteria it doesn't work and I end up with the answer #DIV/0, which is one of the values I want it to ignore.
I am trying to count the number of cells in A1:A1000 which do not have either zero or blank in them.
View 4 Replies View RelatedI have a column of numbers and want to make sure everything has been entered correctly from our scanning software. Basically, I want to automatically highlight any cell that has any letter in it (e.g. z12o2 instead of 21202 or R705 instead of 5705), ignoring any cells that contain only numbers. I haven't had any luck using conditions based on formulas like =ISTEXT.
View 2 Replies View RelatedFor reference, Ive attached a sample spreadsheet. Im trying to find a way to calculate the max number of blank cells between a range of cells. As an example, in row two of my data, the result would be 3 using the range of F2:N2. Can this be done without the use of VB?
View 3 Replies View RelatedI was curious if it is possible to give a single cell multiple number formats based on what the number is in the cell. So for example if my number is bigger than 1000, I would like to use comas so that it looks like this 1,000. However, if it is less than 1000 I would like it to look more like this 999.00.
View 6 Replies View RelatedI am creating a chart and want to get a count of only the blank cells in Column D only if there is information contained in Column A (same row). I am using Excel 2003.
View 2 Replies View RelatedCan i get a simple formula to count a number of blank cell in a column ?.
View 9 Replies View RelatedI have a row of cells, say, A1 to G1. I wish to sum the values in cells, say, A1, C1, F1 and G1 only. The chosen cells can have values 0, >0 or Blank. How do I sum the values and ignore the blank cell(s) without getting #VALUE!? Filling the blank cells with "0" is not an option.
(Any blank cells may have a value added at a later date).
Edit: I could use multiple 'IF' statements, but this is cumbersome. There must be a simpler way.
I am working on 2 tabs in a workbook.
The first tab has raw data - The second is my summary.
TAB1 -includes
column A = name range column B = Evaluation Result 1 %
column C = Evaluation Result 2 %
column D = Evaluation Result 3 %
column E = Evaluation Result 4 %
TAB 2 on...The remainder of the tabs are summary for each name in column A of Tab1.
each summary tab includes
A3 = name
A7 = Evaluation Results 1
A8 = Evaluation Results 2
A9 = Evaluation Results 3
A10 = Evaluation Results 4
The evaluation results can include any % from 0-100 and can also be blank. I need to count the 0 but ignore the blanks so for example on Evaluation Result 1, Im using
=SUMIF(Tab1!$A:$A,Tab2!$A$3,Tab1!$B:$B)
So I can find the name in the list of names and the % score for the evaluation - however I don't know how to ignore the blank cells. If the cells are blank I would like to see "-". if they are 0% I would like to see the 0%.
I have a spreadsheet that has 36 columns and 6000+ rows. Each column has a mix of blanks and content, which is an X. See example of the pattern below, column A. I want to run the COUNTBLANK function through the entire column A so that it assigns a value in column B, next to the content it relates to. Line B4, B9, and B11 would have results, in the example below. I want to be able to apply a formula the entire worksheet, all 36 content columns, and over 6000 rows, so that I can obtain the results quickly by filling down, across, etc. I suspect a loop might be in order. Currently, I have to run the COUNTBLANK between one X and another, repeating that tediously over and over again.
---A----------------------------B
1 X
2 blank
3 blank
[Code]....
I am using the following to count my blank rows.
=COUNTIF(report!N2:N303,"")
Using a formula, rather than VBA, how can I modify this formula to accomodate a variable ending range. Without thinking I initially just counted the blanks in column N - yes there were lots of blanks. My goal is for the end user to not have to modify the formula.
I have the following formula in H2
=COUNTA(report!B:B)-1
which would give me the number of rows used for the month. I tried referencing the countif to cell H2 but, as of yet, have not been successful.
In cell C1 I hace A1-B1 and in cell DI want to display the status of the cell C1 like this : =IF(C10 ; "NOT OK" ; "OK") This means that when the value of the cell C1 is different then 0 cell D1 will display "NOT OK" and if the value of cell c1 is 0 then D1 will display "OK".
The PROBLEM: Because the cell C1 contains a formula (A1-B1) the D1 cell will display "NOT OK" even if the cell C1 doesn't show any number.
I have a spreadsheet and need to ignore one of the cells (P29) if cell value is Zero or Blank and display a blank cell which in this case is (Q2
My current formula is
=SUM($P$19:P29)/2
I am doing an average of a column of cells. How do I tell excel to ignore the blank cells in the column and not calculate them in the average?
View 9 Replies View RelatedI am trying to count the number of times a code appears in column N, IF the corresponding cell on column T is blank. Column T either has a date or is blank and column N has a 4 letter code.
This is what i have been trying.
=SUMPRODUCT((CMRF!T:T=ISBLANK)*(CMRF!N:N="B2"))
I want the code in column N to match to the code currently in cell B2, i have also tried using "" instead of ISBLANK but i get # NUM! error as a result either way. the result should just be a number i.e. 400 (cells with the same code as B2 and no date in cell T)
I have tried to set up a list of cells to highlight in red any numerical values which are greater than 0 using conditional formatting. This works fine, except that all blank cells are also highlighted in red. Formula is currently: cell value is greater than 0. What do I need to do to ignore the empty cells?
View 2 Replies View RelatedExcel 2004 for Mac
I'd like to give a conditional format to a range of cells so that only one cell in the range has a gray background. The condition must include three criteria:
1) The cell cannot be blank, AND
2) The cell's value must be the minimum in the range, AND
3) The cell's value must not equal any value preceding it in the range.
My own attempt looks like this for cell J8 in the range C8:AF8:
=AND(NOT(ISBLANK(J8)),J8=MIN($C8:$AF8),J8$C8:I8)
Problem: This condition works great for all values entered EXCEPT ZERO. When J8 is the first zero in the range, if it is preceded by a blank cell anywhere else in the range, it fails the third criterion (J8$C8:I8) because Excel treats the blank cell as though it's a zero. Result: no gray background.
How can I get Excel to "ignore" blank cells.
I've got a work book (2010 btw) with several tabs.
On tab 5 is an inventory list with "Stock Number and Nomenclature" merged in row A7-Q7 and down to row A23-Q23.
Beside each Item there are “Required Quantities (EA)" in Colum U7-U23. After an inventory is executed, The values are placed in Colum V7-V23 (INV).
Stock Number Nomenclature EA Inv
34419-43450 Mission Modu 1 “X”
After inventorying.... I need a formula that "compares the required quantities (EA) to the actual inventoried values (X)".
IF the actual inventoried quantities are equal to or greater than "Required Quantities" - Display Nothing in tab 6
IF the actual inventoried quantities are LESS than the "Required Quantities" - Display “Stock Number and Nomenclature" in tab 6 for a shortage list, ignoring the "blank cells".
Attached is a spreadsheet I am working on that has a series of graphs with defined dynamic ranges. I am having 2 separate issues on 2 different tabs.
1) Ranges named AirRecBra4 (and Bra10); AirComBra4 (and Bra10); AirRemBra4 (and Bra10) are not pulling in data from the correct data points. Instead of using the last 26 data point, they are currently beginning at the top of the column (currently cells 11 to 36 is their respective columns). The formulas are copy and pasted from working offset ranges in the same tab but are reading differently.
2) On the last 6 tabs beginning with Stn Backlog, I want to have defined formulas beginning in cell B119 and continuing downward to at least F200. However, when I add the formulas, the offset reads the formulas as being data and adjusts for that. I do not know how to adjust the dynamic range to ignore formulas in blank cells.
Global Demand-Capacity Management_working (version 3).xlsm
I have the following formula which counts number of days between dates in two adjacent cells excluding holidays
=NETWORKDAYS(U311,V311,$AA$4:$AA$14)-1
The $AA$4:$AA$14 refers tote range where the excluded holiday dates are stored.
I have included the -1 at the end as it over counts by one day every time. i.e. if the same date is in both cells it counts 1
However if no date is in both fields it count -1 (minus one)
If a date is just in one field it counts a very high number, example below.
-1
16/07/2014
-29879
20/06/2014
08/07/2014
12
[code].....
is there a better formula to use for this? How do I get the result to show ZERO when both cells are empty? can I get the result to show number of days to present date where there is only a date in first column?
I want to count the number of cells in column A that are not blank MINUS or EXCLUDING the cells in Column AD whose values are "Closed".
View 9 Replies View RelatedI have a worksheet (Data) that lists when pupils are in for Nursery sessions during the week. If they are in they have a 3 (hours) by their name in the relevant columns.
In the AM worksheet I now need to pull through a "register" so under each daily heading I need to pull through everyone that has a 3 next to their name under Monday AM / Tuesday AM / Wednesday AM etc. from the Data sheet. However, I don't want it to copy any blank cells. I then need to do the same for the PM sheet.