Is it possible to insert text an a cell value in conditional formating, i,e Ive got the conditional formatting:
=AND(H$4>=$B5;H$4<=$C5)
I want to insert this text whenever this condition is true once and not to repeay it:
="Load " &TEXT(G$5;"dd-mmmm") -- where G$5 is a vallue cell_
I have a table that has dates starting from A6 which is a whole month say 01/2/2013 to 28/02/2013 like a gantt template.
I need if the word "Ordered" is in B5 I need X (crosses) in the date cells starting from B6 to end of month until someone changes B5 to Delivered then I need the X to disappear.
test.xlsm
[URL] ....
I would like to have cells in a certain column turn green if the word in column J of the corresponding row = Not Changed".
View 4 Replies View RelatedHow can I get cells in a column to be highlighted if the cell contains anything other than the word "approved"?
View 5 Replies View RelatedA2:A5 contains different dollar amounts, a6 is the sum of those amounts
In column B (B2:B5), i place a "p" beside the amount in column A once it has been paid.
I want to:
a. conditionally format the amounts in column a to turn green once I put the 'p' in the adjacent column
b. conditionally format the sum in A6 to exclude amounts that have been paid, and only display the total amount of the unpaid lines.
1 2 3 4 5 6
1
2 x x x x
3 x x
4 x x
5 x x
6 x x
Assume that is the table i have. In row 1 i need conditional formatting such that if any of the columns contain an x the first row should be color coded. In my above example every column in row 1 will be color coded expect for row 1 column 6 since there are no x's for any any row in column 6.
How can i do this in excel.Also instead of x's if i have manually entered color can we do the same ?
I would like to know the formula to highlight the color of text in particular cell if the value of the particular cell ( value is text ) is so and so.
For Ex: If the J6 is "Vacation" then the J1 text should be in red color.
I have an excel spread sheet & I wish to highlight any cell that contains any of the following characters with in a string of text.
/ : * " < > ? |
E.g. a cell in the spread sheet containing the text "Is this a Question?" would be highlighted.
I have tried to use - 'Format only cells that contain' > Specific Text > Containing > for each of the characters and this does not work.
When I do this any cell containing any text is highlighted.
In addition there is formatting on any cell > 60 characters which turns the cell red and this works fine.
What would happen if (when I get the problem above resolved), a cell is > than 60 characters & contains a character listed above?
Does 1 formatting take precedent over another?
(Not critical to know the answer to the additional question, just curious - as long as it is highlighted one colour or another then no problem.)
I was wondering it were possible to reference an error. I'd like a cell to have white text if $O19 produces a #N/A error. I tried formula
=($O19=#N/A)
and the formula
=($O19="#N/A")
Doc1.docx
I need the Left picture to look like the Right picture... There's over 30,000 lines of data.
what i would like to do is change the fill colour of D68 if the word Air appears with in D5:D65?
View 6 Replies View RelatedI have a spreadsheet that uses VB macros to calculate sums of cells based on the font color of the numbers inside. It used to be fairly easy going through each cell and "classifying" them by color, so that my macros can go ahead and sum the numbers in each respective color's cell... but now I have a huge amount of numbers and would like to automate the process somewhat. Here's an example using the A and B columns:
flight $400
hotel $150
hotel $130
meal $20
meal $15
flight $350
I tried using conditional formatting to automatically change the color of the adjacent cells based on the presence of a keyword such as "flight" or "hotel", but this change is only cosmetic, and doesn't actually change the font color (it is still the default black, hence why my color-summing macros won't work!).
I'm including a sample macro for what I use to color-sum my cells, but what I am looking to automate the color-coding process based on looking for keywords as explained above in my example. Here is one of the working color-summing macros (for red, in this case) if you'd like to use it as a reference:
Function SumRed(SelectedCells As Range)
' Adds the values of the cells where the font colour is red(3).
Dim Cell As Object
Dim x As Double
[Code] ...........
Via conditional formatting, I am searching to change the color of a specific word in a cell (not the color of everything in the cell, but only that specific word - and the word repeats in the cell). A function such as =isnumber(search("NOK";A1)) colors all the cell values, which I do not want to do. How i can perform this task?
View 1 Replies View RelatedI'm using Excel 2007. I would prefer to stay away from the scripting side of the house if possible. This is basically a 3 day forcast weather chart. The top is the actual weather data, the bottom portion is a color coded reflection of how the weather affects various things.
This product is created in excel, but will be embedded into a powerpoint. It will be updated daily. Here is what I would like. I want the color chart at the bottom to update automatically based on the data I enter above. I have a grasp that I can update the color through conditional formatting, although im not exactly sure what that will look like with all of those cells.
I also figured out that I can insert the letters in those lower cells with something similar to " =IF(C6>90, "T", "") " which would put in a 'T' for Temperature when the temperature got above a certain degree.
I run into a problem when I have multiple factors affecting a single cell. For instance on the example in day 2 of my image. Personnel are affected by Temperate AND UV Index. How would I set up that cell to pull that information from both of those cells and display it accordingly? I would prefer the letters to stay separated by the comma, but I could live without that. The default cell color will be green, with the potential to be yellow or red. I left a few examples of possible situations on day 2 and 3.
I have a workbook that I've built for a project. I've attached a sample workbook. What I'm trying to do, for the entire sheet or workbook if possible, is turn any Cell with a percentage of 30% to 49% yellow and any cell with a percentage of 50% or more Red. I would also like to move the ID's of the variable cells, for example Id number 9922, to the cells beside the description of the rows, Affected would be an example, if the information contained in the same row as the ID meets with a set of variables.
For example I only want the ID's moved if they correspond with IDsub 1-25. One more thing, the people who will be using this spreadsheet will be copying data from a website when it is imported it does not insert the values as numbers. I would like to format the cells, in example workbook they would be any of the cells labeled ID IDsub Variable or Number, so that anything put in that cell will automatically be converted to a number.
I should also probably add that the formatting will be done on approximately 80 rows a sheet with 47 sheets.
I have a list of numbers say in column A, but when the number "41", "25", "90", or "92" is in that column, I want a text message to print 6 columns to the right of it (same row) that says "service".
Basically, I have a Rule that says:
=$A1="Mitigated"
I want the same format if Column A says either "Mitigated" or "Accepted".
I can't create a new rule as I have to save the file in 2003 for other users and I've got another 2 rules for varoius other things.
I've tried crudely putting "Mitigated"OR"Accepted" and it dosen't work.
I am automating an invoice template for an excel novice, thus I want to conditionally format certain cells dependant on what text is in them.
I want to do this in VB but I don't know how!
I would like to conditional format a range of sells which contains numbers formatted as text. I would like if the sell contains the specific number (which is formatted as text) to be formatted in red. It works for one value but I have to list 15 values for which this condition to be done.
For example: if some of the cells in the worksheet contains one of the following values: 265987,265489,235698,2356987,2356987,2356987,235569,...ets - 15 conditions - to turns red.
I am new to VBA but I am trying to insert text and lock all duplicate cells except for the first one. Below is the macro I am trying to make. I keep getting an error on the line:
If(COUNTIF($A$9:$A$76,A9)=1,FALSE,NOT(COUNTIF($A$9:A9,A9)=1))
This is my macro:
Sub SetVoters()
'
' SetVoters Macro
'
'
Sub SetVoters()
'
' SetVoters Macro
'
'
ActiveSheet.Unprotect
[Code] ......
Is it possible to change the format of cell AI3 based on the format of cell C3 and D3? I have C3 and D3 set to turn red based on what is in cell C2 and D2. I would like the following done:
If AI3=C3 & C3 is red, format AI3 blue
If AI3=D3 & D3 is red, format AI3 blue
Otherwise, leave AI3 unformatted.
Possible???
I am trying to set some conditional formatting, but for some reason on of the conditions is not working and I was wondering if anybody know how -
View 3 Replies View RelatedI am working with Excel 2000
If cell D4 has a 90 or above, I want cell C4 to highlight in green, but I also want the cell to display the word green. I know how to do the former, but the latter perplexes me a bit.
A2 contains the word Yes. If A1 is blank, I need to clear the text from A2. Can this be done with conditional formatting? I know I could just change the text to white, but I actually need the text cleared from A2 if A1 is empty. My boss doesn't want me to use VBA so I can't code this.
View 8 Replies View RelatedI'm trying to reverse engineer a spreadsheet (see attached) and apply the data table to my own spreadsheet. The inspiration spreadsheet (attached) utilizes a 2 variable data table and conditional formatting, where the cells are formatted based on their value in relation to a variable called "Gross". So the rules look something like this:
Cell Value Between 0 and Gross-1
Cell Value > Gross
Cell Value = Gross
Cell Value < 0
Graded Color Scale Minimum ="<385000" Maximum =">385000"
I assume the Gross is calculated as 25% * 350,000 = 87,500. The hard coded value of 385000 is actually incorrect, because it's based on a percentage of 10%... but I'll let that slide The resulting formatting of the data table would support the hypothesis that "Gross" = 87,500. However, when I reset the Conditional Formatting to reference another cell with the calculation result of 87,500 it completely throws off the formatting. I'm simply stumped as to how they are using the text "Gross" as a variable. How/where are such variables set so they can be used in conditional formatting?
How to apply the data table logic itself to another spreadsheet.
I'm designing a spreadsheet for our department which tracks a students progress throughout their time at the school. There are 4 levelsStatementSchool Action PlusSchool ActionMonitorIn year 7, they may come into our school at Monitor level, but when they get to year 8 they may have moved to Action Plus. I want to highlight that change on my spreadsheet with conditional formatting if possible so if they go up, the cell will turn red, if they move down the list the cell will turn green.
I've created two columns on an options sheet (which holds all my data validation lists) and assigned a number to each of the levels so i can conditionally format my columns using < and > but I don't know how to write the lookup formula
What I'm trying to achieve
ExcelHelp.jpg
My Options sheet
Excelhelp2.jpg
What i want to do is highlight all row instances where that row column10 has the text "Roller" . All i can see is the forumular =$J1="Roller" ive tryed to select just the single cell J and tryed the whole row and a range. Though i get a error message about =-+ quotation ect.
View 5 Replies View RelatedI have a spreadsheet with employee ID's along with other data, I need to see if any of the ID's are out of this range 0001 thru 1368, now some of the ID's have A,B,C, (e.I 0245A, 1101B,) but some do not have them. if the ID's are out of range I need to highlight it, cant figure this out, because of the Alpha characters.
View 4 Replies View RelatedI have a conditional formatting rule that checks for misspellings of client names.
My employees input client names into a spreadsheet, and I need for the spreadsheet to notify them via a fill color if they have misspelled the name.
So, I set up a rule for each client name using the specific text criteria.
The rule simply checks for the client's name, and fills the cell green if the client's name is correct. If the client's name is misspelled, then the cell remains unfilled.
This works great if the client's name is spelled correctly, or spelled incorrectly.
But there's one hitch:
If the client's name is spelled correctly, but there is some extra character(s) inputted after the client's name, the cell is still filled green even though the data in the cell is useless because the extra character will cause it to be rejected by the next party down the line in the value chain.
So I'm hoping to find a way to make the specific text containing criteria operate with only the specific text I specify and no extra characters or anything after the specific text.
I have an IF statement which sometimes returns the word "FALSE" and a SUMIF statement which sometimes returns the error #DIV/0!
I need to be able to hide the text in the cells when either value is returned.
I've managed to solve one of them (#DIV/0!) by using conditional formatting and using the formula =ISERROR(H35) then changing the text colour to white.
I can't think of a soution for the "FALSE"