Last Instance In Range Excel Cell Location...
I just used the excellent formula =row(index(range,match(1,index,--(range)>0),0),0))) to give me the first instance of a number, but i am wondering if there is a formula to give me the last instance of the number as well? Maybe? This would save me much time if possible.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Select A Range Based On Active Cell Location?
I'm trying to select a range of cells whereby the range is dependent on the currently active cell. I know you can use the "Activesheet.Range("A1:D2").select" method to select a range where the cells are always the same, but I'm after a dynamic selection where the values can be programmatically altered depending on some other result. For example, let's say that I make a certain cell active (based on the result of some other formula), and I want to select the range of cells in the adjacent column that is X rows deep. Putting this into context, imagine the resultant active cell is B2, I then want to select the range C2:C10, but if the active cell is E10, the range selected would be F10:F18 (if active cell is X, then range would be Y:Z). The Offset function would allow me to position the cell based on the current active one, but it doesn't let me select a range. The Range function only lets you choose either hard coded or index cells, e.g. "Range(cells(y,z), cells(y,z)).select", but this is still no good because I'd need to know the index value of the active cell (can this be done?).
View Replies!
View Related
VBA Code To Find The Last Instance Of A Value In A Range
I have a worksheet with a column that lists the city where an item is located. If the city is say Austin I need to find the last cell in the range that has Austin in it. I can find lots of examples where you can find all instances within the range and to find the last cell in the range that has any data in but nothing that tells me how to find the last cell in the range that has a specific value.
View Replies!
View Related
Add 2 Instance >=.01 Of First Instance Of >=.01
I have the following Private Sub test2() Dim c As Range, t As Long With Worksheets(3) .Unprotect Set c = Range("AO10", cells(Rows.Count, "AO").End(xlUp)) t = Application.WorksheetFunction.Max((Application.WorksheetFunction. CountIf(c, ">=.01") * 2), 0) Sheets("Template").Range("D3").value = t 'Range("D3") = t End With End Sub The code is suppose to get the value of >= 1 percent from AO10 then go down the column until it finds the second instance and then add that number to the tile. Thanks for any help in advance. Have a great Friday all! : D Kurt
View Replies!
View Related
Interpolation Given A Variable Table Location & Location Of Data Within
I am trying to develop a spreadsheet that will calculate a cost based on a matrix. I am attaching a sample of the calculation created so far. The end result is in cell M13 and is highlighted in yellow. I kind of layed the formula out in a few different cells, so hopefully it would be easy to follow. simplify this process with maybe another formula that I might not be aware of, or maybe show me how to get this done in VB code. I think VB code would be the correct way to go just not sure.
View Replies!
View Related
Copy A Range Of Cells In Another Workbook Opened In A Separate Instance Of Workbook
I m not able to use the standard Excel Paste Special function when I copied a range of cells in another Excel workbook opened in a separate instance of Excel. Instead, Paste Special thinks that I have copied some non-Excel objects and gave me the Paste As options. This is not the case if I open both workbook within the same instance of Excel. Could you share with us if there is a trick to trigger the normal Paste Special options in such situations (without having to invoke Macro procedures)?
View Replies!
View Related
Finding The Location Of A Cell
i am trying to find the location of the current cell and use the information to print it to screen. For example, if the cell A1 is selected, i need to get the location A1 and use this value for a vlookup. is there a method that returns the current cell location "A1"?? activecell.address
View Replies!
View Related
Increment Cell Location Up By One Cell For A Column
Increment all cells located in Column H up by one (the one above it) cell Except for the header cell (since its the header)(H1), H2 will always be a blank due to the make up of my database so that will not cause the header to be re-written. Column H is not an entirely filled column and some cells are empty (if this info was needed in optimizing the code), Im seeking the quickest and easiest way of implementing this since the database is very large.
View Replies!
View Related
Move/Cut Cell To Another Location
I would like to how I can move the words "Total List Price" over to column "C" rather than have it displayed in column "A". If someone can please advise me as to what part of the code I must change in order to have these changes take place Private Sub CommandButton1_Click() Selection.SpecialCells(xlCellTypeFormulas, 16).Select Selection.ClearContents Range("A8").Select Selection. Subtotal GroupBy:=1, Function:=xlSum, TotalList:=Array(6, 9), _ Replace:=False, PageBreaks:=False, SummaryBelowData:=True Application.Goto Reference:="models2" ....................
View Replies!
View Related
Save To Specific Location As Cell Name
I've been searching for ages trying to work out how to do this but have so far only managed to confuse myself. i have office 2007 and I have found some code to convert an excel sheet to PDF, however I need it to saveas the contents of cell (e6) and save to a location on our network drives (C:TEMP).
View Replies!
View Related
Formula To Calculate Cell Location
i'm not sure how to describe this. i've never had to do this before. here is what i'm trying to do. and it's not working. =MIN(B2:B(G2-G3)) basically instead of saying =MIN(B2:Bx)....i want the "x" to be variable based upong the G2-G3 condition. can this be done some other way?
View Replies!
View Related
Store Cell Location In Variable
way to store a cell's location to variables. Something like: int a, b Cell(a, b) = ActiveCell I'm currently working with a fairly large worksheet, and I'm using Cells. Find to look for a specific cell. Then I want to Filter that column, but I can't figure out what column Selection.AutoFilter Field:=? should be.
View Replies!
View Related
Cell Value Based On Mouse Location
Is there a way to have excel track where my mouse is hovering(say if I have it hovering over cell A4) and have it return the value of A4 in a different cell (e.g B7)? This would occur in real time - that is, as my mouse moved over the spreadsheet, B7 would update in real time. Note I would also accept someone selecting the cell - hovering (no select) would be ideal but selecting is OK.
View Replies!
View Related
Copy Cell Values While Id Value Is Same To New Location Then Repeat For New Id Value
what I need to do is , while an id value is constant copy 2 adjacent cells to a new location on the same row as the first occourance of the id value, then if the id is the same on the next row repeat the copy and add these 2 values to the cells next to the ones previously copied. Once the Id value changes then the copy restarts on a new row which is the same as the first occourance as the new id value and repeats the same sequence as described in the first statement. I have attached a sample spreadsheet showing an example of the source and how I would like it to end up, the colour is only there to seperate the outcome from the source and is not required in the code.
View Replies!
View Related
Find MIN Location, Show Cell Next To It
I imagine this is pretty simple but for the life of me I can't figure it out. Here's what I want to do... Find MIN in Column F After finding the MIN in F (let's pretend F222 is the current min) Show the text in the field next to it (in this case display text from E222)
View Replies!
View Related
Creating Variables Based On Cell Location
if Row i Column j is activated then a corresponding variable Aij, Bij, Cij or Dij would be created (if not already existing), or cumulated by 1. The problem as I see it - completely generalised - is to create a variable where the variable name itself is formulaic, as well as its value. I know SAS would have no problem with this due to the order in which it parses data steps, but I'm pretty amateur with other programming languages so I don't know if this is blindingly obvious or downright impossible!
View Replies!
View Related
Add Position Shape To Cell Location
i need to loop through a column of values and get each value Dim LastRow2 As Long Windows("SCFOutput.xlsm").Activate Sheets("Q2SCNeg").Select Columns("A:B").Select ActiveSheet. Range("A65536").End(xlUp).Offset(1, 0).Select LastRow2 = ActiveCell.Row - 1 For Each c In Worksheets("Q2SCNeg").Range("A2:A" & LastRow2).Cells MsgBox ActiveCell.Value Next c i did this but it selects the first blank row (row 15) and gives me an empty message box 14 times (which is right, but i need 14 values) the reason i need the loop is because the number ov values will always change
View Replies!
View Related
Return Active Cell's Location/row
I'm having trouble identifing a way to return a location for the position of the active cell. I've searched Excel help with "Position, location, return, activecell, etc." and I can't seem to figure this out. I know that it's possible, so that's why I'm on here! ... Ok, say the active cell is currently "F1", and I need the location "F1" to identify the ROW to be used in a formula later, how would I go about that? The current contents of cell "F1"' will be "REPLACE", but I need to change the words "REPLACE" in "F1" and other cells labeled "REPLACE" in column F to the following formula (where the "1" in "A1" is is the current row):
View Replies!
View Related
Search Multiple Columns To Provide Cell Location
I have text (eg. 1-* or 10-* or 11-*) being entered in the following columns Q21:Q128 R21:R128 V21:V128 W21:W128 AA21:AA128 AB21:AB128 AF21:AF128 AG21:AG128 AK21:AK128 AL21:AL128 AP21:AP128 AQ21:AQ128 AU21:AU128 AV21:AV128 AZ21:AZ128 BA21:BA128 BE21:BE128 BF21:BF128 BJ21:BJ128 BK21:BK128 I would like Excel to search the above columns provide the cell location (eg. 1-10-*) is located in cell BF26
View Replies!
View Related
Browse For Picture File And Put Location In Cell
I am trying to code where when someone hits the command button it will popup with the browse form and they find the location of the file and it puts there choice in a cell. don't know if it matters but the location would always be a picture. Here is what I have but it shows -1 in the cell HTML Dim strFilePath As Variant strFilePath = Application.FileDialog(msoFileDialogFolderPicker).Show shUserInformation.Range("D12").Value = strFilePath
View Replies!
View Related
Circular Reference - Value Of That Variable Changes Depending On The Location Of The Cell
Excel 2003 > Attached is a small model of what I am trying to accomplish. Cells B2 and B4 contain the same formula … a formula that calls a simple function. The function has a variable passed to it … and the value of that variable changes depending on the location of the cell. Now, see the function in Module1 … it is called CellCalc. If the variable passed = Jim then value = 3. If the variable passed = Jack then value = 8. That is straightforward. Note also that when Sheet1 is activated, I calculate the cells from left to right and top to bottom … that is important. Here is the challenge. If B2 > 1 then I want to add B2 to B4 and set B2 to 1. I can set B4 properly but I cannot reset B2. You can see my 2 attempts that are commented out. Is there some way of accomplishing this … or am I simply stuck in a circular reference? The alternative to this is to write a function that operates externally on these cells. That will work for sure but then the values of the calculations will overwrite the functions in those cells, thereby taking away the dynamic nature of this application.
View Replies!
View Related
Current Cell Location In A Cell
I need a function(s) that can indicate the current cell column and row in two different cells. e.g. Let's say in Cell A1 should indicate the column of current selected cell and B1 indicates the row of current selected cell. A1 would read - 7 and B1 would read X if the current cell is at X7. I do not know VBA. If you give VBA solution, please give me link on how to activate the codes.
View Replies!
View Related
VLOOKUP - Last Instance
Using Excel 2003 SP2. The formula =vlookup("apple",table,2,false) would return the data in the second column of the array named "table" for the FIRST INSTANCE it comes across for the word "apple." Is there a formula to have it return data for the LAST INSTANCE? This is one where I say to myself "Self, there has got to be a way to do this," but I just can't figure out what it might be.
View Replies!
View Related
First Instance Of A Value In A Column
I need a simple formula which does the following: I have a column of numbers, and I want to find the first instance which is equal or greater than a specific number. For example, Column A 23 41 67 89 51 21 If the specific value is 55 the formula needs to return: 67 if the specific value is 10 the formula needs to return: 23
View Replies!
View Related
Returning First Instance Of Zero
I am trying to create a formula that will search a row left to right for the first instance of zero and return the corresponding column label. I had this working for a smaller table using a couple of hidden columns with nested ifs however the new data set is approximately 25 columns wide and it will get very messy using the same approach. See attached sample with desired results.
View Replies!
View Related
Multiple Instance Of Excel
I am working on an application for a monthly sports tournament that I run. There are three workbooks to this application: the Administration workbook, the Bracket workbook, and the Leaderboard workbook. I currently have a dual monitor setup (extended, not clone) with my laptop in front of me and a large TV on the wall for the players to see. In order for the players to see the bracket and the leaderboard, I open excel, then I open the Bracket.xlsm workbook, then the Leaderboard.xlsm workbook, and I drag those to the TV. I then open another instance of excel on my laptop, and open the Administration workbook. This stays on my laptop and the players cannot see it. Here's what I want it to do: In less words, the administration workbook controls the other two workbooks. Every time a player reports a win/loss, I enter that into the Administration workbook, and that needs to update both the bracket and the leaderboard, so the players can see it on the TV. So, basically, all the data is in the administration workbook, and the other two serve as displays for that data in a format the players can understand. Here's my problem: When I run a macro that is supposed to update the other two workbooks, I get an error: "Runtime Error '9': Subscript out of range." I believe this is because of the seperate instances of Excel. Since Bracket and Leaderboard are in a different instance than Administration, it can't 'see' those other two workbooks. Below is the part of the code that deals with these three workbooks: ....
View Replies!
View Related
Close Instance Through VBS
how to close the instance of excel created by my VBS script. I run the script to open a workbook run a macro within the workbook and save it. I'd like to also close the workbook and the instance of excel. If I close the workbook within the end of my macro I get an unknown run time error from my script. If I elect to just save the file and close it within the end of script, the workbook closes but the instance of EXCEL.EXE is still running in task manager.
View Replies!
View Related
Find Last Instance In A Column
I am in the process of designing an inventory like spreadsheet with prices. If possible, I'm trying to find a well to look at a column for every instance an item shows up (lets call them apples) & then find the LAST instance of apples showing up to pull the pricing of that row only. Is this possible?
View Replies!
View Related
2d VLookup: Unique For Each Instance
Column A contains numbers that repeat themselves. in column B codes are assigned to each number. numbers in column A may have multiple codes in column B. but are unique for each instance the same number may appear in column A. what i'm trying to do is. have the numbers in column A show only once and then have the codes for the corresponding codes appear each in seperate columns rather than all in one.
View Replies!
View Related
How To Remove Text After The Second Instance Of An Asterisk?
I'm trying to convert variable length strings which are being copied from a display and loaded into an array. I have it working fine for the majority of the data, which comes in looking like "*ABC@US" or "*AABC@US" However, some of the data looks a bit different, particularly lacking the @ symbol. So what I end up with is "*ABC US*ABC US*ABC US" What I need to get to is just "ABC US" FYI the US part can be 1-5 characters. SO... I need a way to truncate anything after the second instance of the asterisk. Haven't been able to get it to work using various trim, mid, len, left, right, etc functions.
View Replies!
View Related
Lookup Nth Occurrence Or Instance
I have a very very long weekly table of, say, sales regions, items sold, revenue, profitability, etc. (Very long here means 120,000 rows, and in Excel 2007 - please don't hold this against me! ) Let's assume Row 1 and Column A are for headers. So Column B is Sales Region and Column C is Item Name. The first Sales Region, beginning in B2, let's call it "America", will repeat (B3, B4....) until the Item Names are done for that region. Then the next Region starts, "Australia", and the list of Items starts again, etc. Not all the Items will be sold in every Region each week, and even some Regions may disappear from the table one week only to reappear a few weeks down the road. The table is Sorted alphabetically, though, first by Region, then by Item. One way to VLOOKUP week over week information from last week's report onto this week's report is to concatenate both weeks' Region and Item information (=B2&C2) seperately, and VLOOKUP by that. This returns only combinations of Region/Item that occured in the current week, and with ISERROR, 0 for combinations that occured this week, but not last week. As far as what it returns, this is fine for our purposes but with several pieces of information to VLOOKUP (#, revenue, profit, etc.) and 120,000 rows, it takes forever. Literally over an hour to copy down the week over week parts. I had the idea that maybe it would be faster if I could define individual VLOOKUP ranges for each Region, and then look up Item within that range. These ranges would vary in placement in the table and in numbers of rows each week, as the number of Items sold in each Region waxes and wanes, hence "dynamic ranges" - I hope I've used that term correctly. Is there an effective, efficient way to return the row numbers of the first and last instances of a given Region, and use that range for the Item VLOOKUP?
View Replies!
View Related
Lookup Each Instance Of Repeated Data
In the sample file attached, I want to do a lookup with the employee id in the master sheet and find the multiple results in the "open_text" sheet. From there, I want to display the open text results in one row per employee on the master sheet. If there are multiple comments, then the results will be displayed in separate cells to the right of each other (filling comment1 through comment5 if needed). My main goal at the end of this is to be able to do a mail merge out of the master file. This is why I want the results in one row per employee.
View Replies!
View Related
How To Activate Workbook In Separate Instance
-I've been trying to get an answer to this problem for some time and I would like to try again from a different approach. I may have 5 workbooks open in 5 different Instances of Excel. The number of files open varies. When the below Function is called, it checks to see if the file, trying to be opened, is already open or not. Currently, if the file is already open, a mesage is displayed stating that it is open and the user has to search through tabs looking for the file so that it can be displayed. What I want to do in place of a message, is activate the file that is already open and display it. No message necessary. I have tried "Application.Activate" and can not make it work.
View Replies!
View Related
Finding Cells With First Instance Of Number
I've got a very large spreadsheet wherein I need to write a formula for each row to find the first cell with any entry greater than 0 and then add to that cell the contents ONLY 5 cells contiguious to it. For example data set is this (in .csv format for you) (column headers) Name, Jan01, Feb01, March01, April01, May01, June01, July01, Aug01, Sept01, Oct01, Nov01, Dec01, Jan02, Feb02, March02, April02, May02 Jones,0,0,0,0,5,2,7,9,3,10,13,4,8,9,22,7,9 Smith,0,0,3,8,17,23,9,3,16,28,44,7,6,9,10,5,12,19,10 I need formula to find first instance in each row of entry greater than 0 and then add to that the contents of next 5 cells. Jones would find the 5 and then add the 2,7,9,3,10 to it for formula result of 36 Smith would find the 3 and then add the 8,17,23,9,3 to it for formual result of 63
View Replies!
View Related
Force Workbook Open New Instance
I've created a UserForm which the user exclusively uses to interact with a workbook. The problem is, if the user opens another workbook, it will open in the same Excel "Process" or "Instance" and the user would have to close the UserForm in order to use the other workbook they opened. In VBA or some obscure application setting, is there a way to force workbooks to open in a new Excel Process (or new "Instance" of Excel)? Another possibility would be to code something in the UserForm workbook that, on Workbook Open, would start a new separate Excel process....if that's even possible (can VBA execute a system shortcut or system command string?).
View Replies!
View Related
Reference Cell Based On Button Location & Determine Button Used
I received this code from an example I found once upon a time that was originally submitted by someone else. Right now the code enters the current date in a cell of the same row as the checkbox when it's checked. I need to revise it, or come up with something similar, that will reference the value of a cell when it is in the same row as the button (from the Forms toolbar) that is clicked to activate the macro. First of all, I don't know how to reference a Forms button in VBA. Sub Process_CheckBox() Dim cBox As CheckBox Dim LRow As Integer Dim LRange As String LName = Application.Caller Set cBox = ActiveSheet.CheckBoxes(LName) ' Find row that checkbox resides in LRow = cBox.TopLeftCell.Row LRange = "B" & CStr(LRow) 'Change date in column B, if checkbox is checked If cBox.Value > 0 Then ActiveSheet.Range(LRange).Value = Date 'Clear date in column B, if checkbox is unchecked Else ActiveSheet.Range(LRange).Value = Null End If End Sub Here is some other code I already created. Unfortunately, because I don't know how to do the row reference, I had to create 25 different macros, which just bulks up the size of my file and slows it down. But here is what I'm trying to accomplish in my macro:.............
View Replies!
View Related
Formula To Calc Total Hours For Each Instance
I want to find out how many hours, in total, relate to "consolidation 1, 2, 3; Lease Renewal 1,2 3 etc. What formula can I use. I am working on a "sumif" but it's not working out for me. Hours 1 Consolidation 4.75 3 External Sublea 3 Consolidation 2 3 Special Project 2 External Sublea 1 Lease Renewal w 1 New Lease w/o T 4 1 New Lease w/o T 1 1 External Sublea 3 Lease Renewal w 1 2 Lease Renewal w .5
View Replies!
View Related
Search Down The First Column And Find Any Instance Of The Letter
I have this piece of code Sub do() Dim i As Integer Dim x As integer x = 5000 i = 1 Do Until i = x If Cells(1, i).Value = "C" Then ActiveCell.Select Selection.Insert Shift:=xlToRight Selection.Insert Shift:=xlToRigh i = i + 1 End If Loop End Sub I want it to search down the first column and find any instance of the letter C and shift it (along with the entire row) over two clumns to the right.
View Replies!
View Related
Search For First Instance Of Text & Return The Value
I have a list of product numbers in col. A. In col. O I have a list of file names that contain the product numbers as well as additional characters. I need a formula that will search col O for the first instance of the text in cell A2 and return that value. The next formula will return all instances that contain the text found in A2.
View Replies!
View Related
List First Instance Only Ignoring Blanks In ROWS
I have a set up of investments. Say A1 through to G1. Then on the next row the investments range from A1 to G1 again. This continues down many rows. There are spaces such as D1 and D2 through E2. A B C D E F G 1 ausbil........................ Starting in column H, I would like to list the investments but ignore investments that have already appeared on the row (ie list only the first occurence) and ignore the blanks as well. For example, D1, E1, F1 are to be ignored because of the blank, and the fact that ausbil and amp already appear. In row 2, the blanks in D2 and E2 are ignored as well as the repeated 'amp' in F2. So the table should look like below from column H: H I J K 1 ausbil amp vanguard bt 2 amp becton fidelity bt Is there a simple formula for this? It has to be in rows as I have at least 60 columns of data before these columns begin. There are at least 300 rows.
View Replies!
View Related
|
TRACKER
