Activating Change Event On Button Click?

May 11, 2012

I have this code that ideally should change font color in usedRange to red upon button click. The problem is it's not working and I've been pulling my hair out all day (not that there's much left of it)

HTML Code:
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
Dim UsedRange As Range
Dim cel As Range

[Code]....

and the related "End If" this works i.e. if I click on any cell within respective sheet font in used range all changes to Red but I only want this to change on CommandButton1 click which I have inserted in sheet.

View 7 Replies


ADVERTISEMENT

Activating Userform With A Button Click

May 19, 2013

When my worksheet is activated, code is executed which defaults the values in my userform controls. The users enter the appropriate data, and with the clicking of a command button, the data is entered into the worksheet. When that is complete, the idea is to return the user to same form, in a default value so they can enter in new data for submission. This will continue until the user selects the Exit button onthe userform.

Code:
...
With wshairport
.Range("A" & llastrow).Value = uf2.ident
.Range("B" & llastrow).Value = uf2.freq
.Range("C" & llastrow).Value = slocation
.Range("D" & llastrow).Value = slat
.Range("E" & llastrow).Value = slong
End With
Application.EnableEvents = False
uf2.Activate

This is resulting in an 'Object doesn't support this property or method.'

I'm not sure about the appropriateness here of the 'Application.Enableevents=False" here. Since the fields of the userform have change events associated with them, I need to disable that what the userform activation code defaults them.

View 2 Replies View Related

Adding Click Event To Button?

Mar 16, 2012

I have a form that allows users to browse for a file so the location can be stored in a cell. When they select a file the form then creates another area so people can browse for another file. (Similar to an attach a file on an email)

The problem I have is that when I create the next button I don't know how to add a _click event to it.

View 2 Replies View Related

How To Create Button Click Event In VBA

May 29, 2013

I want to write a macro , which creates a form and once the user double click the form i get a popup message "hello" , but when i run my code i get compile error : Sub or function not defined for the line Sub one().

This is the code on my module:

Sub one()
CommandButton1_Click
End Sub

And this is the code i get when i double click the button

Private Sub CommandButton1_Click()
msg "hello"
End Sub

View 1 Replies View Related

Command Button Click Event

Dec 2, 2008

I have a UserForm with 2 command buttons.

The first Command Button ( called CommandButton22 ) displays the result of some other calculation as its Caption ... this caption will therefore be changing from time to time.

I would like the second Command Button (called EnterButton ), when clicked, to send the caption from CommandButton22 to whatever cell on the active spreadsheet the user clicked into just prior to clicking on the 'EnterButton'.

I would like each time that I click on the 'EnterButton' for the Caption in CommandButton22 to be sent to the next cell down and so on and so on etc.

View 9 Replies View Related

2007 - Color Palette From A Button Click Event

Sep 25, 2009

Need a method for launching the color palette from a Button Click event so that the palette opens, the palette may be used to set a color, then have the color palette return the Long INT color value to the calling click event routine?

View 3 Replies View Related

Change Button Color Upon Click

Mar 30, 2009

I was wondering if it is possible to change the color of a command button after it's been clicked?

This is to allow the user to identify which buttons have already been clicked.

View 9 Replies View Related

MouseMove Event: Button Will Change Color

May 20, 2009

I am trying to do is if a user hovers the mouse over a commandbutton, the button will change color and the label will tell the user what that button does. This works almost perfectly except that if the user goes directly from one commandbutton to the one directly next to it, they the previous commandbutton does not change back to it's original color. It will only work if the use first move away from the first commandbutton and then hovers over the second.

Private Sub CommandButton20_MouseMove(ByVal Button As Integer, ByVal Shift As Integer, ByVal X As Single, ByVal Y As Single)
Me.CommandButton20.BackColor = RGB(149, 28, 2) 'orange
Me.Label1.Caption = "No changes can be made."

End Sub

Private Sub CommandButton18_MouseMove(ByVal Button As Integer, ByVal Shift As Integer, ByVal X As Single, ByVal Y As Single)
Me.CommandButton18.BackColor = RGB(149, 28, 2) 'orange.................

View 9 Replies View Related

Catch The Click Event On "Increase Indent" Command Bar Button

Feb 16, 2010

I want to catch the click event on "Increase Indent" commandbar button.

I have this reference- http://msdn.microsoft.com/en-us/libr...ffice.10).aspx

But not able to execute properly:

Till now I have generated below
Class Module "clsCBEvents"
Public WithEvents colCBars As Office.CommandBars
Public WithEvents cmdDecreseEndent As Office.CommandBarButton

Private Sub cmdDecreseEndent_Click(ByVal Ctrl As Office.CommandBarButton, CancelDefault As Boolean)

MsgBox "Hi"

End Sub.............

View 9 Replies View Related

Locked Cells :: Change The Cell Color On The Click Of A Command Button

Mar 1, 2010

i want the user to be able to change the cell color on the click of a command button. the worksheet is protected. when the user click the command button the active cell changes to red and offsets by 1. then the work sheet is locked again.

The two problems I am having is 1. I want the range to begin from row 10, column k to column FD. all cells down

the second problem is the current code allows me to edit locked cell columns A to J ...

View 9 Replies View Related

Click The Master Button, That Would Click Another Button On A Different Worksheet

Oct 22, 2008

Running into this issue of "transworksheet macros"

I have a master "update" commandbutton on sheet 1. I have two sub "update" buttons on sheet 2 and 3 respectively.

What I would like to do is have the user click the master button, that would "click" the two sub buttons so they run their respective macros on their respective worksheets (within the same worksheet.

I have tried pasting the macro code in the master button, telling it to select the sub worksheet and then run the macro, but the marco runs itself on the master worksheet instead.

View 6 Replies View Related

Activating Worksheet By Clicking A Command Button On Another

Sep 26, 2006

What command should I use if I want to activate sheet1 by clicking a coomandbutton1 on sheet2?

View 5 Replies View Related

Click On Color Button And After Button Click It Will Color Entire Row Of Cell?

Jan 23, 2014

what code I can put behind a button so that once I click on that button,

What ever cell i click on, the whole row of that cell will be colored a certain color.

Is this where i would used a target approach?

View 6 Replies View Related

Worksheet Change Event :: (ByVal Target As Range) Event In Module After Creating A Sheet

Mar 27, 2009

Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?

View 9 Replies View Related

Editing Existing Macro To Preserve Option Button Settings Upon Activating Worksheet With OBs

Sep 19, 2013

I have been using this code and just noticed that it resets all of my options buttons to false when I exit and then re-enter (activate) the sheet with the option buttons.

I see where this is going on, but don't know how to correct it. I only want the option buttons changed to false if

The Sol named range is something other than "Primary Vendor". It seems to call the macro ClearOB whenener the sheet is activated.

Private Sub Worksheet_Activate()
If Range("Sol").Value = "Primary Vendor" Then
For Each OB In ActiveSheet.OptionButtons
OB.Enabled = True
Next OB
ClearOB
ActiveSheet.ScrollArea = "A1:K58"

[Code] .......

View 1 Replies View Related

Command Button Click Creates New Rows Above Button?

Nov 8, 2012

I currently am using a form button to create new rows.

I need two different kind of buttons. I have a button that does this-

VB:
Sub InsertRow()
'this inserts a row where the button is clicked.
Dim r As Range

[Code]....

However, when I try and create these codes using a Command button (I need it for the color), I get the error

"unable to get the buttons property of the Worksheet class"

P.S one other thing, say the button is in row 3, and Cells A1 and A2 are merged, when you click the button in row 3, it should extend the merge to A3.

View 4 Replies View Related

Change Event Causing Event To Fire Again

Aug 7, 2006

I have the following code, which works perfectly:

Private Sub Worksheet_Change(ByVal Target As Range)

Dim TotalDays As Integer

TotalDays = Range("C65536").End(xlUp).Row + 1

The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.

However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.

How do I add the following, to my previous code?

Range("E8").Value = Cells(7, 6) * 2.5

View 9 Replies View Related

Double Click Event

Jun 11, 2009

I am trying to write some questions on cells of Sheet1 of a workbook. Then I want to write the answers on cells of Sheet2 of the same workbook. I want the user to be able to double click the question-cell on Sheet1 and be taken to the respective answer on Sheet2.

View 6 Replies View Related

VBA - Click And Hold Event

Apr 11, 2013

I am creating a spreadsheet that has various form controls, etc... in it and I wanted to create a "help" macro. I have a small Question Mark icon and I want the user to be able to click the icon and have little text boxes appear on the excel sheet with instructions.

I was wondering instead of making a toggle event where the user clicks once to turn on and again to turn off, if there was a way that the user could click and hold on the icon to make my text boxes visible....and when the user releases they disappear.

View 4 Replies View Related

Cell Click Event

Jul 10, 2009

How do I run code if I click on a cell in the workbook, like Cell A1 of Sheet1?

So far I just have...


Private Sub Worksheet_SelectionChange(ByVal Target As Range)

Stop

End Sub

View 9 Replies View Related

Click On Cell Event

Feb 9, 2006

1. I would like to trigger an event once i click on a cell, for example I click one click on a cell (1,1) and it run some macro.

2. When I bring my cursor to this cell, to change cursor pointer to pointer like in hyperlink.

View 5 Replies View Related

Double Click Event Runs Twice?

Aug 18, 2014

I have set double click event to open my userform.

It opens normally, but when I try to close It, It opens again. After that I can close It normally.

I checked Userform code, but can't figure out why event triggers twice. What's wrong ??

This is my double click code :

[Code] ......

View 1 Replies View Related

On Row Click Event Show Dropdown In The Row

Mar 9, 2009

I have some rows in my sheet locked and some unlocked rows. When user clicks on a unlocked row I should be able to enter some information. I am suppose to populate some dropdowns in that row for him to choose. How can this be done??

I know when a user clicks a row worksheet change event is call. I can write a function in the worksheet change event to populate values in the dropdown. I went through some articles, and they say it can be done by hiding and unhiding rows.

View 3 Replies View Related

ListBox Click Event Not Working

Feb 14, 2013

I currently have a set of ListBox controls on a worksheet tab. They are all configured as multi-select and i have the values populated via the ListFillRange properties. Each listbox has an '{All}' option; when the user clicks on this value I want to de-select all other previously selected values. The code for this is straightforward enough, but I cannot get it to fire using the _Click event. Why this is not working?

Additionally, I attempted to use the _Change event but quickly got caught in recursive loops which obviously is not going to cut it.

View 9 Replies View Related

Looping Within Double Click Event

Jun 13, 2007

I would like to create a macro in which, when the user double clicks on a cell, that cell will be shaded yellow and other cells within the Workbook containing the same value as that cell will be crossed out. I have come up with the below code, but it doesn't work correctly. Any ideas on what I have done wrong? Would also like it to not cross out the cell the user double clicked on.

Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)

Dim wk As Worksheet
Dim selectedName As String
selectedName = ActiveCell.Value

With Selection.Interior
.ColorIndex = 6
.Pattern = xlSolid
End With

For Each wk In ActiveWorkbook.Worksheets

For i = 200 To 2 Step -1
If ActiveSheet.Cells(i, 2).Value = selectedName Then
ActiveSheet.Cells(i, 2).Font.Strikethrough = True
End If
Next
Next
End Sub
[/code]

View 9 Replies View Related

Using Enter Key To Trigger Click Event

Jun 23, 2007

I am working with a large legacy file/program which has a lot of issues. Foremost, and unfortunately this cannot be changed, is that all of the controls were placed directly on the worksheets instead of on Userforms.

I had previously posted code from the legacy file which may have been excessively complicated. So I edited my post to this simple example. Sheet1 has one textbox and one command button. Sheet 2 is blank.

If Sheet2.Activate is commented, everything works fine. If Sheet2.Activate is executed, then Excel crashes....

View 9 Replies View Related

VBA: Recognise Mouse Click Event?

Aug 29, 2007

I ask because I would like to change the value of a cell within A:A to TODAY() if the user right clicks on it - or with some keyboard combination.

View 9 Replies View Related

Copy And Round With Click Event

Mar 6, 2007

I use a CommandButton on a UserForm to copy the contents of 12 TextBoxes into the last row on a sheet. I am getting numbers with too many places. I tried to use Round(), but it is not working.

Here is the original With Range("A65536").End(xlUp)
For i = 1 To 12
.Offset(0, i).Value = Me.Controls("TB" & i + 4).Value
Next i
End With

This gives me all of the decimal places.

Here is my attempt to use Round():
With Range("A65536").End(xlUp)
For i = 1 To 12
.Offset(0, i).Value = Round(Me.Controls("TB" & i + 4).Value)
Next i
End With

This gives me a type mismatch error.

View 9 Replies View Related

Run SAME Code For Different Ranges Using Before Double Click Event

Apr 4, 2013

code to have check marks appear in multiple non-adjacent columns in a worksheet by double clicking.

The code I am using works for a single column : (The named range "Checkboxes1" is D4:D100)

VB:
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
If Target.Count > 1 Then Exit Sub
If Intersect(Target, Range("Checkboxes1")) Is Nothing Then Exit Sub

[Code]......

However I also need the code to work on two other named ranges "Checkboxes2" (E4:E100) and "Checkboxes3" is G4:G100.

View 5 Replies View Related

Apply Double Click Event To All Sheets

Jul 16, 2014

I am trying to apply a double click event to all sheets. It works if I apply to each sheet but I won't to prevent from having to copy and paste into each new sheet. I am trying this code in ThisWorkbook but doesn't seem to work.

VB:

Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
' If the cell is clear
If Sh.Target.Interior.ColorIndex = xlNone Or Sh.Target.Interior.Color <> vbCyan Then
' Then change the background color to yellow
Sh.Target.Interior.Color = vbCyan

[Code]....

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved