Error Checking Routine - Check Range Values On Various Worksheets And Report If Error
May 29, 2014
Error Check Marco.xlsm
see attached example. I am trying to write an error detection routine that iterates through worksheets that have numeric values for names (ignore text names or alphanumeric). Macro checks range on each numeric worksheet E3:E33 and is supposed to report back on the SummarySheet if any value other than 1 or 0 is found in range E3:E33 on any numeric-name worksheet. Code as follows:
[Code] ....
Problem is that it just reports EVERY worksheet as having an error when clearly most don't (none do I think in the attached example).
Try changing some of ranges E3:E33 to values other than 1 or 0, it still reports all sheets. Why the macro does not evaluate the range E3:E33 properly and just reports every worksheet as having an error?
I am trying to build a user form to find out the customers who purchase more than $1,000 during a certain period. The userform has two inputs:
One is to select the data range of customer information. Assume all customer information are in the cell A2: H10, how shall I write the error checking code if the user selects the range which is out of (A2:H10)? message box would be " You selection include invalid data, please check"..
The other input is called " Get data past this data", and I can enter a date in the following cell ( txtDate). Regarding the error checking, I am thinking to use IsDate() function to make sure it is a valid date. Will be there be any other error checking you will recommend?
I have a relatively simple, though large, spreadsheet. I get the following in many of my cells: The Error Checking Options button is displayed and the cell itself. is marked with a small green triangle in the upper-left corner. When I click the button, the error type is displayed, followed by the following list of error-checking options:
information specific to the error type
• Show Calculation Steps: demonstrates all steps leading to the error • Ignore Error: allows you to accept the formula as entered, without Excel displaying the Error Checking Options smart tag • Edit in Formula Bar: allows you to edit the formula that is generating the error in the Formula Bar • Error Checking Options: opens the Options dialog box, where you can select the rules governing error checking • Show Formula Auditing Toolbar: displays the Formula Auditing toolbar
When I check the formula it calculates correctly. What triggers this when there is no error, is there a way to prevent it from appearing in the worksheet?
the if stattement works perfectly and does exactly what i want except when it comes to the else part. if there is no error the statements are run perfectly but if there is an error (in this case the error is generated when a match cannot be found in the spreadsheet) the else statement doesnt kick in and post the msgbox. the code just crashes. and returns an error 1004 on the line i have highlighted in yellow
res = WorksheetFunction.Match(invvar, Columns(1), 0) If Not IsError(res) Then
So the issue I am having is that I have a worksheet with two long rows of value. If the user enters the incorrect value, the program gives a error case of 1004. If and when this error occurs I want the program to send a MessageBox to the user then end the program. The problem that I am running into is that whenever I write On Error Goto... It Goes to the label whenever any runtime error occurs. My belief is that there has to be a way to only check for a runtime error on a single line of code rather than the entire sub.
How can I edit the following code. If the "Dload" tab is not there the code errors out. How can I make it so that if the "Dload" is not there the macro says "Dload tab missing. Do you want to check file and try again" If the user says yes. then the macro lets the user pick another file. If the user chooses No then does similar quesiton like I have here starting with
I currently have the code below, and it checks if there are duplicates of the entered value on all sheets. I would also like to prevent users from entering a value that is not within a certain range. How to add this to my code? I've tried to add another If, but it just ended up looping.
Maybe it would be good to make something like: 1. first check if value is within range (between 1000000 and 3999999). if not within range: msgbox and delete entry. 2. then check for duplicates
I have written a VBA procedure which loops through excel files in an array: in turn it opens the file, refreshes the data, saves the file and closes. I would like to write an error handler which stores the file which errored (copied from the loop iteration) and the error description to an array. The error handler should then close the file and continue with the next iteration - e.g.
Code: If ActiveWorkbook.ReadOnly Then ActiveWorkbook.Close Next i *Although a generic if error may be better.
My idea is that all files which errored in some way will be stored in an array which I can automatically print/send to a user so they can manually figure out the problem. (This element falls outside the range of this query).
Below is a simple example of my efforts which only contains one file in the array to make things simpler: the error handler section won't work, it's just there to show my thinking
Code: Sub Refresh_CRIS() On Error GoTo Errorhandler Dim routepath As String routepath = " chdfsSharedAreaPrivateTest" ChDir routepath
[Code] ........
Errorhandler: On Error Resume Next Failed = Array(i) If ActiveWorkbook.ReadOnly Then 'Just an example for testing ActiveWorkbook.Close Else MsgBox "Pivots which failed to refresh:" & Failed '& ", ", 0, "Debug" 'Test with msgbox End If End Sub
In Worksheet 1, Cell B63 I would like to create a drop down menu, with two options for the user to select - 0.05 and 0.01. I would like each selection to then control the formula in the cells C63:L63, for example;
I am trying to run create a simple macro that copies and paste special values - something I have done 100's of times but for some reason I keep getting an error message - even though I recorded the macro and didnt write it by hand - see below:
Sub Macro6() Cells.Select selection.Copy selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False End Sub
For which I get 'Compile Error - Expected Function or Variable'
I'm trying to add a little error handling in my code. I have a macro that, when running opens a number of workbooks. At the end of the macro, my code then closes all the workbooks I've opened.
I was wanting to create an error-handling procedure that displayed a message box, and then closed any workbooks that I've opened during the course of the macro. Obviously the error could trigger at any point, so not all workbooks may have been opened at the time
My code is as follows - I've tried On Error Resume Next in the error-handling code, but Excel still returns an error that it can't find the Incidents_MTD sheet when trying to close it.
Code: On Error GoTo ReportError code code code ReportError:
I have an issues with a formulae I have written to measure two factors;
A; How many different countries appear within a certain date range. B; What countries are they.
I tried a unique list, but could not get it to work within a range? I dont particuarly care how the data is pulled through as long as I do it. At the moment I have become stuck in 'Unique Ranges' and have n given up?
The formulae issue is in the tab "Problem_Formulae", the dat in the sheet 1, and the date ranges in sheet 2. Also, just to make life a bit more challenging pivot tables are a no go .
I have a macro that takes the date from different excel sheets, consolidates the data and renders the pivot table and chart accordingly. It was working fine when the date range defined for the pivot table was static. Now I have made it dynamic since the data range changes each month depending on the number of days it has got. When I run the macro, it runs succesfully, generates the report and save & close the report, but after that I am getting this error. Errorneous
what I want. It relies on an input box asking the user to enter a part code, which when found creates a duplicate copy. However, if the user enters a part that doesn't exist I get a run-time error. Can anybody point me in the right direction so when a user enters an incorrect part they get a message telling them it doesn't exist.
Private Sub SortTest_Click() Dim s As String Dim r As Excel. Range
Range("A2").Activate s = InputBox("Enter the number you wish to find") If StrPtr(s) = 0 Then MsgBox "You must enter an existing part number!" Else Set r = Cells.Find(What:=s, After:=ActiveCell, LookIn:=xlFormulas, _ LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _ MatchCase:=False, SearchFormat:=False)
1) Data - the students are listed in Column A, math scores in Column B, reading scores in Column C and science scores in Column D. The grades of 300 students are entered in this sheet.
Student Math Reading Science
Jimmy 75 84 100
[code].....
2) Report Card template - This is the report card that needs to be generated for each student. It's pulling the student name and grades from the Data worksheet.
Student Name =Data!$A2
Math =Data!$B2
Reading =Data!$C2
Science =Data!$D2
How do I create worksheets (report cards) for additional students? I have 300 students in the school. I need the next worksheet to reference Data!$A3. I know how to cut and paste the report card template and then edit =Data!A2 to be =Data!A3 to create a report card for Sally. How do I create the 300 report cards I need?
I've been teaching for 13 years. I can create a report card for each student in my class and edit each worksheet individually for each student. Now I've been asked to do this for the whole school and I don't know how to create the other 299 sheets I need.
I am using a Uderform in order to check if some cells in several columns are higher or lower than values I set in my textboxes.
However, I think I am having a mistake in my code (it runs but doesnt return the correct informations) as I have blank cells in certain columns.
Concretely I am giving 1 point if the criteria is valid (if for example the value in the cell is <= 1) but some of these criteria are 1 when they should be 0.
As I said it runs but I need to add a fix for empty cells / blank cells and if possible N/A error cells in this so that the code gives 0 to the criteria and moves to the next column (next select case)..
I have a cell built into my spreadsheet that serves as an error check (i.e. returns the word 'ERROR' if certain criteria are fulfilled on the spreadsheet). I'm trying to write something into a Macro that will check this cell and not allow it to run if it states ERROR, returning a dialog box to notify this, is this possible?
Essentially GREEN pulls Values from BLUE and BLUE pulls Values from RED. Red being the base worksheet from which everything is calculated.
In my GREEN workbook I have the following =MIN('BLUE'!H14,'BLUE'!L14)
And this will work fine.....Until I press a clear Worksheet button that has been implemented on the RED worksheet (button was not implemented by me and I do not wish to edit anything with respect to that button)
When RED is reset the #REF! Error will appear in GREEN. This is fine because it cant find any values From BLUE. However when I do input new values into RED, which in turn updates BLUE which is where GREEN in theory should then be able to pull the results from.... But it just stays with a REF! error.
Is there anyway i can permanently set a CELL to have the following code =MIN('BLUE'!H14,'BLUE'!L14), no matter what happens to other cells?
I am trying to run code to update Excel Worksheet from the value in a cell.
The code is -
Sub upDateSheetNames()
'Standard Module code, like: Module1. Dim ws As Object
For Each ws In Worksheets [Code] ......
Although it does actually work i.e. populates the worksheets with the correct values when I run the code a dialogue box appears indicating - "Run-Time Error '1004' Application Defined or Object Defined Error"
When i select the 'Debug' option the "ws.Name = ws.Range("Q1").Value" line is highlighted.
I'm relatively new to this, and its entirely possibly (more likely probable) that I am attempting to this in the wrong way, but here's what I'm dealing with...
criteria is bascially month and week based when i apply average forumla for a month i did get the avg for a month but when a record for tht month is unfilled eg weekend is off so no values for that date that displays div/0 error.
I want a Macro which cud change this div/0 error in a selected range to be null so it didn't reflect in avg function on final sheet and gives that value there. i know that it can be handle by updating the forumla
=IF(B1=0,"",A1/B1)
but i want this solution for 30 sheets for which in value filled range macro either deletes div/0 error or place null value there.
I have been working on this macro all day and no matter how many different ways I write it I can't seem to get it to finish correctly without giving me an error message. The error messages are different depending on how I write the macro, so what the message says is not important.
I have attached a sample of my work which contains the macro, but I'll post the code below as well. There are two tabs in the workbook. One contains the data("download") and the other is the template("Blank") per say. I need the macro to create a new worksheet using the template for each line of the data ("download")until it gets to the "finalrow." It names the worksheets the value of D3 currently, but I'd like to figure out how to name the worksheets by C3. c3 contains the names of customers, and is duplicated for each product they have purchased. I'd just like to attach a number after the name if it is a duplicate. i.e. Adam, Adam1, Adam2, Adam3 for all "Adam"s.
Look into the code and see if that makes sense. if not, feel free to ask questions.
I am trying to combine data from two separate worksheets onto one so it can be sorted for printing. Using the macro recorder, and the search function on the forum, I managed to ham-fist my way through most of it - except for one issue.
How can I have Excel/VBA go to the first open cell in column A before it pastes the 2nd batch of information? I get an "object required" error with the MyRange variable.
Code: Sub UpdateSortedTab() Dim MyRange As Variant
' Removes Old Information Sheets("Sorted").Select Columns("A:E").Select Selection.Delete Shift:=xlToLeft ' Copies Bench Stock Information
I wrote a chart formatting macro, which works when applied to a specific sheet, and I'm trying use it in a for each loop. The macro is supposed to loop through a list of sheets and only format chart 1. I'm getting a "run time error 438: object doesn't support this property or method" at this line:
Code: Sub UpdateTextAllStateCharts() 'This macro loops through worksheets in a list and performs the assigned task Dim sheet_name As Range For Each sheet_name In Sheets("WS").Range("C:C") If sheet_name.Value = "" Then
See the attached sheet. I am trying to add together two figs which are linked to calculations which have formula built in to stop error messages when there is a 0 / 0 = #value type error. However when these two cells are added, if the cells are blank I get an error message. And if only one cell has a value, I get "" with my existing formula. what I need to do to get a result of 7 if for example cell A4 = "" + B4 =7. At the moment my formula shows "" in the sum total of these cells
OK, so I have a userform with some text boxes that I have specially formatted to accept only date values in the form of mm/dd/yy. By default they are blank. I have a check in one of my codes that looks like this
Code: If DateBox vbNullString And DateValue(DateBox) > checkdate Then M1 = "NEOPRENE" & Chr(13) Else M1 = "" & Chr(13) End If
Where DateBox is this specially formatted TextBox and checkdate is a future date being checked against.So if DateBox has a value in it AND that value is greater than the date being checked against the returend string is Neoprene, otherwise it is blank.
Well the problem I have is when the first condition returns FALSE, i.e. when DateBox is empty, the DateValue half still gets evaluated and returns a type missmatch error or something like that because DateValue("") returns an error. I have line of code 8 times, one for Neoprene, squeegee, etc. So the name of the text boxes are each unique and I am using M1, M2, M3, etc.
For other reasons, use of "On Error Resume Next" doesn't work for this situation because it causes a result opposite to what I want to happen.
I have some code that, although works fine in Excel 2003, does not in Excel 1997. I receive this error when I try running it:
COMPILE ERROR: NAMED ARGUMENT NOT FOUND
Sub HPVAL() Dim r As Range, myStr As String myStr = "HP" Set r = Cells. Find(What:=myStr, After:=ActiveCell, LookIn:=xlFormulas, LookAt _ :=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _ False, SearchFormat:=False) If Not r Is Nothing Then r = r.Value While Not r Is Nothing Set r = Cells.FindNext(r) If Not r Is Nothing Then r = r.Value End If Wend End If End Sub
It looks like Excel is getting hung up on the "SearchFormat:=" portion of the code.
I am currently creating a database which involves using a macro to create new worksheets in the workbook. When the macro is run and a work sheet is being inserted, an input box asks the user for a worksheet name.
As you can imagine, the worksheet does not like it when the worksheet name input by the user, is the same as one already existing and so throws up a 1004 error.
In order to resolve this error I have included an error handling code to request the user to input a differnet worksheet name, as the one previously inserted exists.
My problem: It all works fine until the user types in an existing worksheet name twice, so once initially and again when the error handler has prompted a second attempt. On the second incorrect input a 1004 error warning is displayed.
I would like the error handler to keep repeating until a worksheet name that doesn't exist is inserted by the user. Is this possible?
I have written a Excel (2003) that searches a worksheet for a string in any cell. If the string is not found, it uses the 'On Error GoTo' command to jump to a given label. It works fine on the first string not found. When it searches for the next non-existent string, it fails with:
'Run-time error '91': Object variable or With block variable not set'
Do I have to clear a buffer after each cells.find search?
