provide me a macro to give a particular message or Cell Name when the cell is blank. I have to check around Eight columns and the starting row is A10. Moreover the sheet can have different numbers of row at different time like some time only 50 persons data will be there and some times 60 or 85 like this but the maximum will be 300. So if the 50 persons data is there than it should not warn about row 51 onwards.
View 1 Replies
I am writing a formula for finding a maximum out of three average values. The cells that will be populated with data are A1 to A5; B1 to B5; C1 to C5. The final cell where I want to write the formula needs to show the maximum of the three averages (average of data in each row).
The difficulty is that sometimes only the A and B rows are populated (and sometime only A row is populated) and if B and/or C are blank, the formula fails and shows "#DIV/0!".
How can I write so that if C is blank, then evaluate only A and B data. And If both B and C are blank, then just display the average of row A.
I have a list of about 100 cells that's going to have user-inputed data for varying cells that could repeat. For example:
AAA
(blank)
BBB
(blank)
(blank)
AAA
(blank)
CCC
etc.
I need a formula(s) for a second list that can find the non-blank cells and put them in order (not necessarily alphabetical).
My excel file was imported from a 3rd party and has many blank rows across the entire sheet.
I want to delete these rows if every cell across is blank.
How is this accomplished?
I tried the formula "=isblank(C2:C18)" however I get a "False response on those rows that are completly blank.
This might be pretty tricky. I'm trying to create formulae that can find non-empty cells in a list, and separate by date.
Example:
The following are given:
DateItem
1/23AAA
1/24
1/25BBB
1/26
1/27
1/28
[Code]....
I would like:
List 1 (Jan) List 2(Feb)
AAA BBB
BBB CCC
The original equation was for finding non-blank items without separating by date was given to me below Hopefully it's much easier with it: [URL]...
I have a row of cells with names. Alex, John, Martha, Jim, etc.
Each person has a list of data under them. I have a master column of data. Depending who is on duty today, I want the macro to find the person and then copy paste special the master column over the person column.
Thus, in the macro code where it says
Find(What:="John",
I want it to refer to a specific cell. I.e. what:=$E$4.
Then it must go to the cell it found and copy paste the info in.
I have a step in a very long macro to populate a sheet (SheetMaster) with the course completion status based on another sheet (SourceData) in the same workbook.
On "SheetMaster" Col E starting with row 2, I want to look at whether a concatenated value of E1 + A2 is in Col G in "SourceData". The macro should run until it gets to a blank row in Col A.
Here is an example to help illustrate the logic:
E1 = Ethics101
A2 = 123456
A3 = 654321
If Col G in "SourceData" contains "Ethics101-123456", E2 = "Complete", if not "Incomplete"
If Col G in "SourceData" contains "Ethics101-654321", E3 = "Complete", if not "Incomplete"
...and so on until it gets to a blank row in Col A...
Need Excel Macro or Formula for finding duplicated cells more than 5 times and copy them into new sheet.
For Example;
apple
orange
apple
banana
apricot
[Code]...
OUTPUT in new Sheet will be
apple 5
orange 5
I need to combined all non blank cells in a given row into 1 cell. But within each row i have 5 phases that the values fall into, which is denoted by the 1st charter 1, 2, 3, 4, or 5. for example, in a given row i have 1-a, 1-c, 2-d, and 1-f and these values occurs in non consecutive columns starting from G to ALR. I need a macro that sorts these values in one of the 5 phases. So in another sheet the macro would combined [1-a 1-c 1-f] in Phase 1 and [2-d] in phase 2. and if there are other phases it would put them in the appropriate cell.
See attached workbook : Work Order Summary Sheet.xlsx‎
However, in addition to what the macro already does, it is possible to add another work sheet in the same work book that outputs the values in separate cells? It also has to output the data in order: for example, in the first work sheet the data is inputted at random and has spaces but the macro will have to remove all the blank cells and output them in order based on the first value in the test string, 1, 2, 3, 4, and then 5;
input:
blank 3-x Blank 1-y blank 2-z 1-k
output:
1-k 1-x 2-z 3-y
I have a form in excel (very simple) that I need to put on the web - People can then fill out certiain bits of the information and the idea is that they then click on the button to email it back to me. Ie complete it there and then and email it straight away so that they don't need to save it etc.
I can't for the life of me work out how to do this! I've managed to get the macro to open an email with the correct details on but not paste in the information so am at a complete loss and appear to be going round in circles!
I need a macro that will combine/consolidate rows when cells from 2 separate columns match. example...
beginning:
Column A column B column C column D column E
row 1 Seminole 80 unleaded 1064 100100
row 2 Seminole 36 clear dsl 825 100100
row 3 Seminole 80 unleaded 1101 100100
row 4 Seminole 30 dyed dsl 3421 100100
This is what I need the macro to do:
Column A column B column C column D column E
row 1 Seminole 80 unleaded 2165 100100
row 2 Seminole 36 clear dsl 825 100100
row 3 Seminole 30 dyed dsl 3421 100100
I Have the following macro conducting web queries. As the list of websites is spread out I need to get the macro to skip over blanks?
VB:
Sub Top5Investors()
'
' Top5investors Macro
'
'
Dim Erw, Frw, Lrw
Frw = 1
Lrw = Range("A" & Rows.Count).End(xlUp).Row
For Erw = Frw To Lrw
[Code]...
I am looking for a macro to put No in all Blank cells in used range of a sheet.
View 1 Replies View RelatedI wonder if soeone could change the following macro so that the bottomcell
is set to be as far down as there is content in Column "A". As it stands if I fill in blank cells in Column "C" and the last cell with data is say C10 it does just this. But if the actual last row with data in column "A" is A14 then cells C11, C12, C13, and C14 are ignored. C11, C12, C13, and C14 should be the same as C10 above them.
Sub FillBlankCells()
Dim topcell As Range, bottomcell As Range
Set topcell = Cells(1, ActiveCell.Column)
Set bottomcell = Cells(16384, ActiveCell.Column)
If IsEmpty(topcell) Then Set topcell = topcell.End(xlDown)
If IsEmpty(bottomcell) Then Set bottomcell = bottomcell.End(xlUp).Offset
Range(topcell, bottomcell).Select
Selection.SpecialCells(xlBlanks).Select
Selection.FormulaR1C1 = "=R[-1]C"
End Sub
Other macros recognize the actual last row.... but have issues with columns formatted as Text. The macro above doesn't create problems with columns formatted as "Text".
I'm using a macro to send the contents of a sheet to an html file. The problem I am having is that for some reason it is not recognizing the blank cells in the last column (column 9) of the sheet, thus I am not getting the " " that I need in the html code. The code for column 7 works fine and is identical. I did a test and selected column 9, right clicked, and "Cleared Contents". When I ran the macro again it worked fine. The problem is that sometimes there may be data in column 9, so I can't clear it. Here's the code I'm using. Is there another condition I can use to look for a blank cell or something I can do to the spreadsheet for my code to work?
If Cells(i, 9) = "" Then
a.writeline " <td valign=""top""> </td>"
Else
a.writeline " <td valign=""top"">" & Cells(i, 9).Text & "</td>"
End If
I am trying to come up with a code that will copy column A entirely, and insert the copied cells into the first blank column. In the columns with information in them, there will always be text in the first cell, so that can be used as the test to find the first blank column, but I'm not sure how to get this done for my macro.
View 12 Replies View Relateda vb macro which checks whether a cell is blank or not? if yes then r1c1 formula = now() if NO gives a pop up message you can not input the time here.
View 10 Replies View RelatedI would like code that will delete all rows where there are blank cells in Col D from row2 onwards.
View 2 Replies View RelatedI'm using the the Texttocolumns method in a Macro, and when it runs across a cell without any data I get "Run time error '1004' No data was selected to parse". How would I get passed this? I would like it to just remain a blank range without the error. Here's the code I'm using:
Range("F38").Select
Selection.TextToColumns Destination:=Range("F38"), DataType:=xlFixedWidth, _
FieldInfo:= Array(Array(0, 1), Array(5, 1), Array(13, 1), Array(21, 1), Array(25, 1)), _
TrailingMinusNumbers:=True
I have been searching for a macro that would lock all the non blank cells (cells that have any value/text) after the workbook is saved.
When the user clicks on save a message box should prompt stating that "The data you entered has been locked successfully".
I have a small challenge, where I am trying to fill blank cells with the data from the last populated cell above.
However, I need it to be able to automatically recognise when a manual entry has beed actioned down the column and recalculate for below that cell with the new data.
The data in the cell is selected from a drop down. I want it to populate all the cells below, until the next drop down is selected. And automatically repopulate them all when it is selected.
E.g. Cell C8 has the value "DATA" selected, and everything below is autofilled with "DATA", but when I select cell C12 with different drop down list value "VALUE", all the cells below stay as "DATA" because they are obviously no longer blank.
What I need if C9 - C11 to remain filled with 'DATA" and from C13 to auto fill with the newly selected value "VALUE".
Need this to happen for as many rows and data selections from the drop down as needed (endless).
I have used:
Code:
Sub FillEmpty() Application.ScreenUpdating = False Application.Calculation = xlManual Dim cell As Range For Each cell In Intersect(Selection, _ ActiveSheet.UsedRange) If Trim(cell) = "" And cell.Row > 1 Then cell.NumberFormat = cell.Offset(-1, 0).NumberFormat cell.Value = cell.Offset(-1, 0).Value End If Next cell Application.Calculation = xlAutomatic 'xlCalculationAutomatic Application.ScreenUpdating = False End Sub
which does the auto fill, but won't change the cells below once one of them has been updated.
Info:
Drop down list has 31 possible selections at the moment
Starts at Cell C8
Needs to be flexible enough to add an indeterminate number of rows, and additional items to the drop down selection.
I have some reports that I run that go out to analyst daily and I use this script to merge all the documents together. They are the same everytime. However it includes a series of blank rows because the vba I use to create them I believe causes this. Is there a command to remove the VBA when merging them together. Here is the selection copy piece.
HTML Code:
'Import a sheet from found files
Do While Len(fName) > 0
If fName ThisWorkbook.Name Then
[Code].....
I have a Workbook with 18 "sheets and a recap sheet. Each sheet will have a different number of rows between A9 and N60. On my recap sheet I want to be able to find what the last row with data in Column A and then be able to do a vlookup on that row to display the data in Column 2,3,4, exc. I know how to do the vlookup's fine but I don't know how to specify to select the last row. The data will always be different and the number of rows will never be the same either.
I tried the below formula because everyone complains that if you use True is returns the last row but that didn't work.
=VLOOKUP(A2,Sheet_2!$A$9:Sheet_2!$N$60,2,TRUE)
Is there a way to do this without VB, I don't understand VB at all and that would get way over my head really quickly.
How would I do a vba for finding a blank cell in column D, and when a blank cell is found, delete and shift up cells D through N on the same line?
View 2 Replies View RelatedAfter sorting data I have a column starting in G3 that contains blank cells at the top and then data.
1. I need to find the first 4 active cells that contain data in column G, and then copy the corresponding data contained in columns A,B and C.
2. I then need to paste the data from these 3 columns ( A,B,C) to a Cell starting at R16
I am trying to write a macro to do the following:
Search column "I" for blank cells. If one is found then all adjacent cells to the left in that row are shifted to the right by one. (in other words for that row cells A-H are shifted right to become cells B-I).
Search column "I" for blank cells. If one is found then all adjacent cells to the left in that row are shifted to the right by one. (in other words for that row cells A-H are shifted right to become cells B-I).
View 2 Replies View RelatedI have spreadsheet of data, I need to extract any rows that have blanks cells in columns F or P or T.
If possible I would like a macro I could run that would cut all of the rows that meet the above criteria and paste them in to a separate sheet.
Ok so my named range looks like this:
[Code]....
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
