I want to have a macro which always sums from cell E3 down to the cell immediately above the cell which my cursor is in eg. If my cursor is in E300, I want the macro to sum E3 to E299 and put the total in E300, if it is in cell E10, I want it to sum to E9 and put the total in E10 etc
View 9 RepliesI have a number in a cell, lets say its 900. I want to multiply this number by 12 and then divide that by 52.
So a calculator I would simply type in 900 x 12 / 52 = 207.7
On excel I tried:
=sum(a1*12) /12
and it didn't work....
I have a listing of numbers in different catagories such as the following:
Type A:
1
Type B:
2
Type C:
4
Total:
7
I want to be able to have a cell automatically calculate to say:
Type A:
"(1/7)"
Type B:
"(2/7)"
Type C:
"(4/7)"
with that exact formating.
Attached is an example of what I am trying to do.
I am looking to transfer the sums for a calendar month in one column to cells in another location for each month.
I put some notes in the sample attached, I appreicate any help getting this to work.
The question is pretty much described in the post title. Here is the situation:
I have a workbook that has data plugged into it manually throughout many sheets, and at the end there are a few sheets with different graphs and charts that are generated by a macro. This macros works perfectly - all the data is accurate and the figures are perfect when compared with a manual count. The problem I have is that the cells where the macro puts the summed values are in a chart that is supposed to create a bar graph. Normally, if I change a value that a bar graph uses I see the bar graph change - but that does not happen with the cells that have values placed in them by the macro. I also have a section that sums the values in the chart to make sure it's running right, and these values do not update automatically as well. The cells have the formula =SUM(B3:B12) and so on, in them. Right now, every time that I run the macro I need to go into the cell with the formula, hit 'enter', and then it does the summation. Is there a way to correct this problem, or is this something that is part of excel?
I have the following columns that return cover period dates.
Start of Cover PeriodEnd of Cover Period01-Nov-0631-Jan-0701-Jul-0831-May-0901-Dec-0930-Jun-1001-Jan-1131-Dec-10
I however need a macro that will delete the cell contents if the "Start of Cover Period" (column AK) date is > than the "End of cover period" (column AL) date.
Thus it must compare ak2 with al2 and if ak2>al2 then clear both cells. if AK2
Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
View 2 Replies View RelatedI have 2 columns and 10 rows (A1:B10). In column A are certain text values. How do I write a macro to go through the table and preform an operation in the corresponding cell in column B depending on the value in cell A? for example, if A3 = "Complete", overwrite the formula in B3 with the value (paste value)?
View 2 Replies View RelatedBasically I have three columns in a work Sheet F, G, & H. F is empty, G contains text and column H has both text and numbers.
I want to be able to automatically copy the value from Cell H to Cell F if cell G contains the word cost.
I would also like to delete all rows where Column G & H contain two dashes -
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View RelatedI have a sheet where i have many differently named areas (like state1_1 and state1_2) When I doubleclick on a cell then a macro should run with following criteria: 1) Macro will run if the doubleclicked cell is part of any range in the list. Here I mean that names of ranges which belong to that list start with word state (like state1_1 and state1_2). No other ranges should not be in that list. If the cell is not in the range that is part of the list, then nothing should happen.
View 2 Replies View RelatedI am attempting to create a ROI calculator for my place of work. I want a blank cell to fill in green or red based a cell below it being equal or greater than 5.0%. What is the Macro or equation to do that?
View 5 Replies View RelatedI have a spreadsheet where if Cell A2 says "Deposit", Rows A2-E2 would be formatted with a Blue background.
I've tried conditional formatting, but I can't built it into a Macro (I can't make it run), and it only highlights the cell that has that value. I also tried having the spreadsheet filter down to only the values I want highlighted, then highlighting all cells and un-filtering the column- this didn't work either.
It would basically say :
If (any cell in Row A) has text = "Deposit" (it needs to be exact, it can't be "containing"), set cell with the word "Deposit" and 4 cells to the right as Blue (I'm not picky about the color).
I did a search on this site and found some code I was looking for (see link:
http://www.excelforum.com/excel-prog...e-in-cell.html - Leith Ross's response code).
The code works perfectly, however, if I save the workbook with a different spreadsheet on top than the spreadsheet referred to in this code, I get an error message: Method 'Range' of object '_Worksheet' failed.
I should state that I did change "Private Sub Workbook_Open()" to "Private Sub Auto_Open()".
I assume I need to modify the code but am unsure as to how.
I have many workbooks which all have a summary sheet called summary, and which are all kept in the same folder (although this folder name/filepath may change from year to year).
I want to be able to set up the column headings and then copy the same set of summary information from each book so that it can then be used for analysis. The cells to be copies derive their value from formulae, it is the value that needs to be copied.
I attach a workbook with the format needed and the source cells. The source sheet will be password protected.
I know this is a question that has been raised before and I have searched the forum but not come across a question that is close enough to work from - my VB skills are appalling.
Before unloading a userform the range to select the active cell is set to
View 3 Replies View Relatedi am currently using the macro below to import text files into a spreadsheet. Currently, it begins the import in cell A1 which is what I recorded it to do. how do I change the code to begin the import on the active cell?
View 2 Replies View RelatedI am trying to write a macro that will make the bottom cell in a column equal to the top cell. The top cell will not always be in the same row and there won't always be the same number of cells.
View 1 Replies View RelatedI'm trying to write a macro similar to the one found here: here:http://www.techonthenet.com/excel/macros/checkbox.php.
Rather then use a textbox, I would like the cell to display the date when text is inserted in the cell to the left.
ie. I insert text (the letter 'a') in cell E11, and the date appears in cell F11.
I would also like the macro to do this for a range of cells ie. for E11 to F21, then from G11 to H21, then from I11 to J21, all the way to column IV.
I have a huge database. I am looking for a macro that can search for a particular word. If a match is found, the macro should do two things simultaneously... (i) delete the contents of the cell in which the match is found........(ii) display the same contents 1 row below and 1 coloumn to the left of this cell where the match is found. For e.g....
View 9 Replies View RelatedI have a macro that inputs a sheet and cell from the user. when the macro tries to make a formula it outputs =data!'AE3'. I need it to output =data!AE3
Dim Sheet As String
Sheet = InputBox("Take Data from where?")
Dim startcell As String
startcell = InputBox("Start Cell?")
ActiveCell.FormulaR1C1 = "=" & Sheet & "!" & startcell & ""
I have a macro that copies all my sheets onto a new sheet called combine. It is pasting onto the combine sheet starting on cell A2 instead of cell A1. Following is my macro.
Sub Combine()
Dim J As Integer
Sheets(1).Select
Worksheets.Add
Sheets(1).Name = "Combined"
On Error Resume Next
For J = 2 To Sheets.Count
Sheets(J).Activate
Range("A1").Select
Selection.CurrentRegion.Select
Selection.Copy Destination:=Sheets("Combined").Cells(Rows.Count, 1).End(xlUp)(2)
Next
End Sub
I am trying to write a macro where I divide the value of one cell by that of a second cell, multiply it by 500 and then to paste the outcome of the formula to a third cell. This is what I wrote
View 5 Replies View RelatedIn one column (Column A) I have a column of data which contains long descriptive text - i want to extract a specific piece of text from this descriptive text and enter it into the next Column (Column B).
E.g. Cell A1 = "Hello Buddy, how are you?" - i want to extract the word Buddy and enter it into cell B1
then A2 into B2, A3 into B3, etc, etc,...
Is there a simple macro out there that can do this?
I have to loop through a range in A, and if the letter "C" or the number "9" appears in the cell anywhere (it won't be a whole cell value) then I need column B to show "C".
I know how to do a whole value loop, but I'm stumped on a 'find X anywhere' search.
Basically, I need to reformat a set of data (see before and after). A specific column should only contain 1 value, if there is more than 1 value it will be separated by a comma. If this column contains more than 1 set of data then I would need to insert a row and duplicate the information based on how many different sets there are. All the copied data should remain the same with the exception of the "Key" column, it should only have 1 value and each copied row should contain the corresponding value in the key field.
BTW - it could be on the same sheet or a different worksheet (doesn't matter)
BEFORE
Name Number KEY Date
Name1 1 a,b,c 12/1/2011
Name2 2 x 12/1/2011
Name 3 5 one,three 12/1/2011
AFTER
Name Number KEY Date
Name1 1 a 12/1/2011
Name1 1 b 12/1/2011
Name1 1 c 12/1/2011
Name2 2 x 12/1/2011
Name 3 5 one 12/1/2011
Name 3 5 three 12/1/2011
I have the following code, so far:
Code:
Sub CopyPasteValue()
Dim ARow
Dim AColumn
Dim BRow
Dim BColumn
Dim Value
AColumn = 1
[Code]....
What I want it to do is to start in cell B1 and look down until it finds a non-blank cell; copy the contents of that cell. I then need it to go to the same row Col A and go down from until it finds the first non-blank cell then paste into the corresponding cell in Col B. It should continue this way through the rest of the worksheet. There is no set pattern to say to go down 5 rows or such. Also the number of pastes in each step is variable from 1 to ??
In my worksheet, the first non-blank cell in Col B is cell B3 and the first non-blank cell in Col A is A7. The paste should occur in cells B7:B10 because the next non-blank cell in Col A is A11.
Is it possible to make a macro that will go cell by cell and format the last number of the cell as subscript? Here's an example:
Brooks #1H 5Stewart #8H, #9H 8Stevenson D Unit #1H 2150,000 BblsStewart #8H, #9H 8Stevenson D Unit #1H 2Brooks #1H 5Stewart #8H, #9H 8Holasek #1H 5Brooks #1H 5Stewart #6H, #7H 8140,000 BblsRayburn Unit #5H, #6H, #12H 6160,000 BblsHolasek #1H 5450,000 BblsStewart #6H, #7H 8#N/ARayburn Unit #5H, #6H, #12H 6Stewart #6H, #7H 8Holasek #1H 5Rayburn Unit #5H, #6H, #12H 6Stewart #6H, #7H 8Holasek #1H 5
I would like ONLY the last NUMBER of the cell to be formatted as subscript. The cells with "Bbls" would be left as is.
Is it possible to do a macro to copy a cell in excel and paste that cell in outlook and return to excel
I have workbook template that I use to generate reports from a list of depts. This list is contained in a drop down cell that is a named range in a different worksheet. My current process is as follows:
-Select Dept Name from the list
-Click a command button which is assigned to code that calculates and saves to a file
-Repeat for next report until all reports are generated
I would like to automate this process by producing all reports with a single command with the following functionality:
-The Dept Name needs to be populated in the specified cell containing the current drop down because it drive various vlookups and other formulas
-If possible, I would like to retain the drop down functionality as I would like to have the option of running an individual report or running the “batch”.