Copy Cell Value To Userform TextBox
Jul 14, 2014
I have a userform that my staff use to enter the files they are working on. I have a button they click to launch the userform, then they need to input a 'Track Number' the access the details of the file.
Currently, they enter the track number manually that they see from a list on a sheet.
I have found the code below that enables them to click on the file, listed on the sheet and it automatically launches the userform.
What I am after, is the next step, it copies the track number in the cell they click in, but I would like the code to PASTE into the first textbox the copied Track Number.
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Selection.Count = 1 Then
If Not Intersect(Target, Range("B4:B25")) Is Nothing Then
Selection.Copy
Application.Run "'FOI & ROI Record Management.xls'!Launch.Launch"
[Code]....
View 9 Replies
ADVERTISEMENT
Dec 28, 2012
I have a form that is used for updating jobs on a worksheet. I want a txtAssetsJob on the form to display the value that is in a cell in column "E". The row is set up as iRow and is based off of a selection in a cboJobNumber2. Everything else on the Form works great, I just can't get the textbox to display the value.
I have also noticed that I can still put letters into the txtboxes and it copies them to the worksheet. I think I have them formatted correctly.
Code:
Private Sub txtAssetsJob_Change()
Dim iRow As Long
Dim rng As Range
[Code].....
View 5 Replies
View Related
Jul 25, 2014
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
View 1 Replies
View Related
Jul 27, 2014
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
View 1 Replies
View Related
May 23, 2008
I am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?
In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.
I was trying to guess the code... but it is not working...:
UserForms("Userform1").TextBox1.Value = UserForms("Userform2").TextBox2.Value
View 3 Replies
View Related
Mar 9, 2012
How to copy FROM a text box on a user form?
All I seem to be able to find online is people wanting to copy to a text box.
I've tired the basic me.textbox1.copy and it probably works but excel seems to forget what its just copied when I close the userform
Is there any way of adding the contents of textbox1 to the clipboard so it can be pasted in to a word doc or field on an access database?
View 1 Replies
View Related
Aug 23, 2009
I have a form “RiseSpan” with three TextBoxes, “txtInSpan”, “txtDepth” & txtOutSpan”.
I wish to enter values in “txtInSpan” and “txtDepth”. These values are placed in cells A1 and A2. If both “txtInSpan” and “txtDepth” are greater that zero, I want “txtOutSpan” to show the value of cell C11.
View 9 Replies
View Related
Mar 2, 2009
how to show a value in textbox form. So i have some columns in an excel file , but i want to show the last cell value of the column Amount in the textbox.
View 9 Replies
View Related
Dec 21, 2007
I am creating a user interface for inputing info into a sales order, and then printing the sales forms already pre-filled based on the user's input. SO, I need the user to be able to type text into a textbox that is in a multipage control that is in a userform, and then have it automatically populate a specific cell in my workbook. Seems like this should be relatively simple, but I am just getting started with vba and can't seem to figure this out.
View 3 Replies
View Related
Dec 24, 2007
I am having trouble using User Forms.
I am trying to enter data using User Forms to apply to a specific cell.
For example the user enters text or a number value into a text box and clicks a command button to submit that information into a specific cell. In this case D43.
View 4 Replies
View Related
Jan 2, 2008
How do I refer to the contents of a userform's textbox on a worksheet?
The userform will be opened, edited, and closed by the user. I would like to be able to refer a cell on my sheet to that textbox so that they always have the same content.
View 7 Replies
View Related
May 14, 2014
I am working on a addin UserForm to quickly format cell text, especially only select characters in a cell. I have this functional in a modal setting working with the active cell when I activate the UserForm. What I would like to be able to do is to work in excel without having to close the Userform and have the textbox update with each new cell. I have changed the UserForm properties to ShowModal = false which gets the first half. However the textbox will only show the cell value I started with.
VB:
Private Sub UserForm_Activate()
TextBox1.Text = ActiveCell
End Sub
[Code]...
View 3 Replies
View Related
Jul 25, 2014
I have two sheets. sheet2 is a lookup table. sheet1 is information sheet. i have created a userform where a user inputs data into 3 textboxes and clicks a button. i have the code for transferring the data from the textboxes into row after the last used row on sheet1, columns a,b,c. in columns d and e i have vlookup code that takes the value in column c and performs the lookup function to return values found in sheet2. this all works fine.
I am trying to display the vlookup results in a 4th textbox on my userform.
If I use this code:
[Code] ......
I receive a type mismatch error
if i use THIS code:
[Code] ..........
if works fine!?! what gives?
View 4 Replies
View Related
Jan 27, 2014
I am trying to make my textbox on the userform equal a cell value in a column. I need the userform to look at the last cell that has a value in a column and display that value into the textbox on the userform.
Ex. I am starting my data from Cell "O8" and the last possible row would be "O51" Starting with O8 I need my textbox in the userform to read this cell value. After each entry the next row in Column O will have a value, so I would need my userform textbox to read cell "O9" value the next time the user form opens. Here is what I got thus far:
[Code].....
It gives me a Compile Error: Invalid or unqualified reference.
View 3 Replies
View Related
Apr 19, 2008
I want a floating userform (showmodel = false) to display the results of a cell.
On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.
I want the same results on a userform.
I tried the texbox & using the the controlsource from the properties window, this was only good for one result. for the next result the textbox won't change its value.
As i want this for display purpose only can i use the label for the above problem
View 9 Replies
View Related
Nov 3, 2009
I have two TextBoxes (txtSpan & txtTrib) in a UserForm (frmSizes), when values are entered in these TextBoxes they show (as they are typed) in cells of the spreadsheet. The resulting calculation is in cell B11.
How do I get the value in cell B11 to show in a third TextBox (txtAns) as soon as it is calculated without closing the UserForm or running another code?
View 8 Replies
View Related
Nov 11, 2009
On the attached example, there is a user form with a text box and an enter button.
What i want, is when i press the enter button, the value in the text box goes into cell B2 on sheet1 in the format of "?/???".
View 2 Replies
View Related
Jul 2, 2012
I current have code that fills in textboxes in a userform with values in cells:
Code:
Private Sub CODE_Change()
Dim ws As Worksheet
Dim fm As Worksheet
Set ws = Worksheets(ActiveSheet.Name)
Set fm = Worksheets("Form")
[Code]...
How to I modify the lines under Checkbox1.Enabled = False so that they only take a section (of varying size) of the text in a cell and put it in textboxes in a userform?
ie. The text in a cell is "Outer: A123 ; Inner: B456." I would like A123 to appear in a textbox called OuterColor and B456 to appear in textbox called InnerColor
View 4 Replies
View Related
Jul 4, 2013
Userform I've created. It's not for inputting data, just for displaying and linking to data.
I have a textbox on a userform that I would like to display exactly what is written in cell C5 of sheet1. I don't want the user to be able to edit it, just for it to display the same as C5. Any better way of doing it than using a textbox that would be good also.
View 2 Replies
View Related
Jun 19, 2014
Is there a way to avoid a textbox value from being entered into the same cell on a worksheet more than once.
I am building a BOL(Bill Of Lading) wizard. Within the userform the end user will input the part numbers and quantities to be shipped... it also has a textbox that will hold the PO number that each part belongs to. I have a command button that says Add to Pallet 1. Pallet 1 will be on a row by itself on the excel sheet. Parts belonging to different PO#'s can be on this 1 pallet. When the end user clicks the "add to pallet1" button... the PO textbox (textbox6) value will be sent to (Sheet3) Cell I28. If, for example, PO# 12345 has already been added to (sheet3) Cell I28 and then the end user plugs it in again, i would like for it to be discarded and a message box stating this PO Number has already been accounted for...
so you get a better understanding...
Qty's... part numbers and PO#'s for Pallet 1 will be on row 28. Multiple PO#'s will fit into Cell I28 seperated by spaces and i will do wrap text.
Qty's...part numbers and PO#'s for Pallet 2 will be on row 29...so on and so on...
View 1 Replies
View Related
Oct 8, 2009
I am building a userform which also needs to display current data from a cell in the most recent row of a worksheet. This current data and all userform selections are then to be written to a row in a separate worksheet. I have not been able to properly reference the current data; My (rookie) approach intended to set the ControlSource properties of a TextBox to the desired current data.
Private Sub CommandButton1_Click()
'Begin form
' find last gps reading
Dim LastRow As Long
Dim Source As Worksheet
Set Source = Worksheets("Sheet1")
Set Dec = Worksheets("DecimalForm")
View 4 Replies
View Related
Jul 26, 2007
I have a userform with many textboxes that I am using to collect data which is transferred to a worksheet using a command button on the userform. All data is correctly transferred to the worksheet except for the text box I am using for the date.
The date is transferred from the userform to the spreadsheet but the date is left justified implying that it is text but dates that I have manually entered into the spreadsheet cell are right justified. This may seem picky but I am using a 'count' function within the spreadsheet to determine how many rows contain the date.
I am using the following code which I am entering in the format of dd/mm/yyyy, to to transfer the date to Cell A1 the worksheet 'Results'.
Private Sub CommandButton1_Click()
Worksheets("Results").Cells(1, 1) = UserForm1.Textbox1
End Sub
how to transfer the date to the cell so that it right justified, hence treated as a number within the cell.
View 6 Replies
View Related
Jun 14, 2008
I'm trying to make a userform to edit cell A1. So, by pulling up a macro (with other content in there already), how do I display the value in A1, and also have a button to modify its value/change it.
View 2 Replies
View Related
Jul 4, 2014
I have a table with huge amount of data. I use a UserForm with textboxes to populate the information of the required row.
There's a Comment Box text on a specific cell that I need to populate on one of the textboxes but I am unable to do it.
The code I have that works well, populates the cell content:
[Code].....
Now, on that cell, there's a comment text that I need it populated as well on another textbox but it doesn't work. I tried:
[Code] .....
But this doesn't work.
View 8 Replies
View Related
Sep 25, 2006
Users select a row number which then opens up a Userform. Comboboxes and Textboxes on this Userform are then populated with coloumn values (dependant on the row initially selected). If the row number was the same each time I could accomplish this by the following.
Private Sub TextBox1_Enter()
TextBox1.Value = Range("a1")
End Sub
but as its a variable I'm trying the following (which I think should work)
Private Sub TextBox1_Enter()
TextBox1.Value = Range("a" & edi & "")
End Sub
I think I need to declare the variable 'edi' as Public. If so where should this be? I've tried 'Genereal Declaration'
View 4 Replies
View Related
Feb 25, 2008
I have created a userform for the purpose of inputting data into a database, now one of the people who uses it wants me to make it so certain cells will be in a different colour if a button is selected, I can use this code to make the textbox change colour
Me.TextBox1.ForeColor = &H8000000D
but when I have the data in the textbox transfer to a cell in excel any colour change is lost, is there any way to get around this,
View 9 Replies
View Related
Jul 3, 2014
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
View 3 Replies
View Related
Feb 2, 2010
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
View 11 Replies
View Related
Jan 26, 2014
I have a userform with numerous text boxes. One textbox is used to input a date with the following code
[Code] .....
When I have completed my userform I want to export this date as a date into range(a2) so I can then use the filter function to filter by month or year. THe problem I am having at the mo is that in the userform it is formatted as dd mm yy, but when I export it from userform it changes to mm,dd,yy. So if I entered 12th January 2014 it changes it to 1st December 2014.
A workaround is to export as text but then I use the filter by month year function so would prefer to avoid this.
View 1 Replies
View Related
Oct 12, 2011
Code:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
View 1 Replies
View Related
