Error When Trying To Display Cell Value In Userform Textbox
Jul 25, 2014
I have two sheets. sheet2 is a lookup table. sheet1 is information sheet. i have created a userform where a user inputs data into 3 textboxes and clicks a button. i have the code for transferring the data from the textboxes into row after the last used row on sheet1, columns a,b,c. in columns d and e i have vlookup code that takes the value in column c and performs the lookup function to return values found in sheet2. this all works fine.
I am trying to display the vlookup results in a 4th textbox on my userform.
A particular textbox in myuserform requires a displayed format of 000.000. I would like the user to enter a no less, and no more, than 6 digits. On tab, the textbox displays that value in the preferred format.
eg. enter 123456, TAB, results in textbox display of 123.456
I have tried ...
[Private Sub freq_AfterUpdate() freq = Format(freq, "000.000") End Sub But this results in 123456.000
I am trying to display the results that i get in excel sheet in a userform using textboxes; I need to round off the digits in these textboxes so as to display 2 digits after decimal point! I would like to have the code to solve this problem!
VBACode for Calendar to display in Userform textboxWhat code so I use in order to have a userform1 calendar linked to a worksheet cell and then have the worksheet cell data displayed in another userform2 textbox?
I want the users to store time only in some of the textboxes in a form so I have used control tip text for those textboxes. But i want to write vba code for displaying the error message if the users don't enter time in hh:mm:ss in those textboxes.
I have a UserForm that Dead Head Miles will be entered into one text box. The Trip Miles will be entered into the second text box I would like for the user form to show the answer after the first entries are made something like this:
1)Dead Head Miles 20 + 2) Trip Miles 500 ----times---$2.00 3)Projected Rate $1040 --show this after the DH and Trip is entered and Multiplied by $2.00
I have a userfrom with a text box which is used to receive a telephone number from the user. The 'Event' code that checks the formatting of the telephone number is "tbCustTel_Exit". If my user enters a format other than what is acceptable for a tel number, they get an error message telling them to re-enter.
My problem is they still end up EXITING that text box they made a mistake in? How can I override them exiting the text box if they make a mistake - and keep them in the text box so they can try and re-enter the tel number again?
I having problem to determine the format value of dates that needs to be inserted in a Userform.
I have the following format in my userform for my Textbox:
When I select the calendar in my userform that is set as follows:
And select the first day of the month, it will always add the format as 05/01/2014 but if I select todayâ€™s date as example it will add it in the right format: 2014/05/26
I have included a sample to demonstrate the function of the calendar as I have declared it public as d in a module, therefore making the population of my userforms textbox easier to add information on dates.
If you add 2014/05/01 - 2014/05/26 and 2014/05/06 you will see where the system is having problem with the month and dates I guess the system confuses the two?
I have a form “RiseSpan” with three TextBoxes, “txtInSpan”, “txtDepth” & txtOutSpan”. I wish to enter values in “txtInSpan” and “txtDepth”. These values are placed in cells A1 and A2. If both “txtInSpan” and “txtDepth” are greater that zero, I want “txtOutSpan” to show the value of cell C11.
I have a userform that my staff use to enter the files they are working on. I have a button they click to launch the userform, then they need to input a 'Track Number' the access the details of the file.
Currently, they enter the track number manually that they see from a list on a sheet.
I have found the code below that enables them to click on the file, listed on the sheet and it automatically launches the userform.
What I am after, is the next step, it copies the track number in the cell they click in, but I would like the code to PASTE into the first textbox the copied Track Number.
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Selection.Count = 1 Then If Not Intersect(Target, Range("B4:B25")) Is Nothing Then Selection.Copy Application.Run "'FOI & ROI Record Management.xls'!Launch.Launch"
I have a form that is used for updating jobs on a worksheet. I want a txtAssetsJob on the form to display the value that is in a cell in column "E". The row is set up as iRow and is based off of a selection in a cboJobNumber2. Everything else on the Form works great, I just can't get the textbox to display the value.
I have also noticed that I can still put letters into the txtboxes and it copies them to the worksheet. I think I have them formatted correctly.
Code: Private Sub txtAssetsJob_Change() Dim iRow As Long Dim rng As Range
I am creating a user interface for inputing info into a sales order, and then printing the sales forms already pre-filled based on the user's input. SO, I need the user to be able to type text into a textbox that is in a multipage control that is in a userform, and then have it automatically populate a specific cell in my workbook. Seems like this should be relatively simple, but I am just getting started with vba and can't seem to figure this out.
I am working on a addin UserForm to quickly format cell text, especially only select characters in a cell. I have this functional in a modal setting working with the active cell when I activate the UserForm. What I would like to be able to do is to work in excel without having to close the Userform and have the textbox update with each new cell. I have changed the UserForm properties to ShowModal = false which gets the first half. However the textbox will only show the cell value I started with.
VB: Private Sub UserForm_Activate() TextBox1.Text = ActiveCell End Sub
I am trying to make my textbox on the userform equal a cell value in a column. I need the userform to look at the last cell that has a value in a column and display that value into the textbox on the userform.
Ex. I am starting my data from Cell "O8" and the last possible row would be "O51" Starting with O8 I need my textbox in the userform to read this cell value. After each entry the next row in Column O will have a value, so I would need my userform textbox to read cell "O9" value the next time the user form opens. Here is what I got thus far:
It gives me a Compile Error: Invalid or unqualified reference.
I have two TextBoxes (txtSpan & txtTrib) in a UserForm (frmSizes), when values are entered in these TextBoxes they show (as they are typed) in cells of the spreadsheet. The resulting calculation is in cell B11.
How do I get the value in cell B11 to show in a third TextBox (txtAns) as soon as it is calculated without closing the UserForm or running another code?
Userform I've created. It's not for inputting data, just for displaying and linking to data.
I have a textbox on a userform that I would like to display exactly what is written in cell C5 of sheet1. I don't want the user to be able to edit it, just for it to display the same as C5. Any better way of doing it than using a textbox that would be good also.
Is there a way to avoid a textbox value from being entered into the same cell on a worksheet more than once.
I am building a BOL(Bill Of Lading) wizard. Within the userform the end user will input the part numbers and quantities to be shipped... it also has a textbox that will hold the PO number that each part belongs to. I have a command button that says Add to Pallet 1. Pallet 1 will be on a row by itself on the excel sheet. Parts belonging to different PO#'s can be on this 1 pallet. When the end user clicks the "add to pallet1" button... the PO textbox (textbox6) value will be sent to (Sheet3) Cell I28. If, for example, PO# 12345 has already been added to (sheet3) Cell I28 and then the end user plugs it in again, i would like for it to be discarded and a message box stating this PO Number has already been accounted for...
so you get a better understanding...
Qty's... part numbers and PO#'s for Pallet 1 will be on row 28. Multiple PO#'s will fit into Cell I28 seperated by spaces and i will do wrap text.
Qty's...part numbers and PO#'s for Pallet 2 will be on row 29...so on and so on...
I am building a userform which also needs to display current data from a cell in the most recent row of a worksheet. This current data and all userform selections are then to be written to a row in a separate worksheet. I have not been able to properly reference the current data; My (rookie) approach intended to set the ControlSource properties of a TextBox to the desired current data.
Private Sub CommandButton1_Click() 'Begin form ' find last gps reading
Dim LastRow As Long Dim Source As Worksheet Set Source = Worksheets("Sheet1") Set Dec = Worksheets("DecimalForm")
I have a userform with many textboxes that I am using to collect data which is transferred to a worksheet using a command button on the userform. All data is correctly transferred to the worksheet except for the text box I am using for the date.
The date is transferred from the userform to the spreadsheet but the date is left justified implying that it is text but dates that I have manually entered into the spreadsheet cell are right justified. This may seem picky but I am using a 'count' function within the spreadsheet to determine how many rows contain the date.
I am using the following code which I am entering in the format of dd/mm/yyyy, to to transfer the date to Cell A1 the worksheet 'Results'.
Private Sub CommandButton1_Click() Worksheets("Results").Cells(1, 1) = UserForm1.Textbox1 End Sub
how to transfer the date to the cell so that it right justified, hence treated as a number within the cell.
Depending on the result of a formula in R67, one of three things will occur. If the result is a 1, UserForm1 is displayed. If the result is a 2, UserForm2 is displayed. If it is nothing, nothing happens. Ok, I can do that.
However, with the code below, whenever I select any cell, and there is a 1 or a 2 in R67, the userform pops up. I only want it to pop up if I change a value in C6 which in turn changes the result of the formula in R67.
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Range("R67").Value = 1 Then Run "UserForm1" End If If Range("R67").Value = 2 Then Run "Userform2"
I've tried setting a monitored range. I've tried the code below in one form or another and it didn't work.
Code: If Not Intersect(Target, Range("C6, R67")) Is Nothing Then Macro