I am attempting to join together up to 32 arrays. I haven't even managed to join 2! can it be done in excel 2003 VBA? the arrays are 2 dimensional (x Rows, 3 Columns).
I have tried this but just produced empty variants:
I have a long OR function that I'm working on. The logicals for this change the search value from 1 to 9. Here is one of the logicals:
sumproduct(--isnumber(search(1,???)))=0
I need the "???" to be the arrays. The most complex of these will be: A1:C1&a2&c2&a3:c3 or is it
A1:c1,a2,c2,a3:c3 or perhaps another join method like
concatinate(a1:a3,a2,c2,a3:c3)
How do you join arrays to get the right result?
I have a marco that works perfects to Concatenate (join) all of the cells in Column A. However, I want to seperately join all of the cells in each column. So I wanted to the Concatenate of Column B to go in B1, Column C to go in C1, etc (or until there is no data in a column). I think there is a way to change this into a loop, but I don't know how. Below is the macro I have now.
Sub ConcatenateAll()
Dim x As String, rng As Range, cel As Range
With ActiveSheet
Set rng = .Range("A2:A300")
For Each cel In rng
x = x & cel.Value
Next
.Range("A1").Value = x
End With
End Sub
I am trying to join text in two different cells using concatenate function / & operator In the combined cell I want the text from second cell to appear in Bold while the text from first cell should continue to remain in normal font. Is there any way i could achieve this?
View 4 Replies View RelatedI have two Worksheets: ' Forecast' and 'Actuals'
'Key' for Rows in both sheets is:
ProjectNumber, Change Order Number, Role (Text Desc)
Data for Forecast is Jan, Feb, Mar-> Project Forecast in Days
Data for Actuals is Jan, Feb, Mar-> Project Actuals in Days
Rows in Forecast Sheet may not have matching Actuals (e.g. Project not yet started), AND VICE VERSA (e.g. a new Role may have been needed on a Project, not anticipated at Forecast time, or Actuals are being recorded for a Project without a Forecast being created).
What I would like to do is:
Create a single Sheet with the same key as above,
Each row containing columns for 12 months of Forecast Data, and a further 12 of Actuals Data.
Where an exact key match is found, Row will have both sets of Data (one set from each sheet). Where a match is not found, then Row will have either Forecast Data OR Actuals Data only.
This task needs to be repeated, so needs to be either a straightforward manual procedure, or a Macro.
I have tried various combinations of VLOOKUP, but that doesn't help pull in data that has no matching key. I realise I could manually create a 'keys' Sheet, de-dup and use VLOOKUP into both sheets, but this seems horribly long-winded.
Currently I am trying to concatenate two arrays stockotherarray and stockfittingsarray to create stockarraynew
Below is my code, I keep receiving a compile error.
Sub stockarraynew()
stockarraynew() = Split(Join(stockotherarray & Join(stockfittingsarray))
End Function
Trying to build array elements from a list
19909
19953
etc
My thought is in helper column to concatenate the quotes and comma "xxxxx", Then I will copy paste special transpose and should have an array list
I tried ="""&A2&"","
Returns
"&A2&",
But I need it to return "19909",
I have been trying to use the concatenate function to join some text strings to a cell on a different sheet - From an input sheet -Sheet 1 named Input, to a Notification Form (Sheet 2). Although the Function Argument display tells me that it will display the result I want it actually displays just the formula. It's a very simple thing
Address 1 10 Downing Street
Address 2 Westminster
Address 3 London
Postcode SW1A 1AA
I want displayed as: 10 Downing Street, Westminster, London, SW1A 1AA in a single merged cell. All I am getting on the Form is =concatenate(Input!c25," ",Input!c26," "Input!c27," "Input!c28). I feel sure that it is a very easy solution but I can't arrive at it!!
I have a workbook that has a lot of worksheets. I want to merge all the worksheet data, skipping blank rows from each worksheet and simply appended the data on one single worksheet. The goals is to just copy the data from worksheet b and append to worksheet a>copy data from worksheet c and append to worksheet a> etc. etc.
View 9 Replies View RelatedI have drop down fields using a vlookup to grab the corresponding data in a colums next it which is being concatenated into a one big cell. The problem is a set of other columns that I need to pull data from but its dependant to a previous column. In the attachment you see which ever region is selected the following column data is grabbed and the same goe for title. Now when the location is selected the info in its column should be selected that corresponds to the row that the specific title is on. example
if selected: North America>Secretary>Texas
results: A Crazy Mix->;typical,Notepad, pen,square dance
i need to create a macro that is dynamic.
i have attached a example on here.
My main idea is that i have to select the rows/column to compare that they are the same for the selected column then concatenate and merge.
In my example, i wan Column B be like Column D... but in the end i wan it to be like Column F if they are the same.
I have a worksheet with 10000 plus entries in ten columns From K to T. I wish to have a macro with Concatenate function to merge certain Columns from these ten columns, in one column with help of input boxes which may ask inputs, about range (from and to ), and number of digits to concatenate in the required column. I use Excel 2003 XP in work but an example is 2007 attached.
View 5 Replies View RelatedI am trying to merge cells A1:GR1 in to one cell by using the concatenate formula and the copying and pasting the values in to the same cell.
View 4 Replies View Relatedhow can i merge Date 1 and Time 1 into a cell ? And give me mm/dd/yyyy hh:mm format? And then a subtraction on 9/3/2008 0:00:40 - 9/2/200823:31:25, which give me a hh:mm:ss result?
View 5 Replies View RelatedI have some records. I want to merge them through macro in a singel cell, like I have selected a range then I want to merge them in active cell with a comma.
View 9 Replies View RelatedI have been using the CONCATENATE function to merge 2 strings together into a single cell. However the problem is, the third concatenated cell depends on the other 2 existing. The idea is I want to take 2 columns of data, and use a formula to merge them, then delete the original 2 data columns so I have a single column with the full data merged.
COL 1 (A3) = First Name
COL 2 (B3) = Last Name
COL 3 (C3) = Full Name (wanted)
So I do =CONCATENATE(A3,B3) and that puts the fullname in C3, but I want to sort of "flatten" C3 so that I have the fullname by itself and I can delete the original cells (A, and B)
I have several hundred cells that I would like to merge into one cell seperated by a "/".
Concatenate usually works, but I got a big fat NO WAY! from excel when I tried to do too many.
I am retrieving a CSV file from the net. In this file there are 'x' amount of row data and 7 columns. I only care about the values in the 7th column for each row. I also don't care about the entire first row. A graphical version would be represented something like this, with the values I want colored in orange:
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
|---,---,---,---,---,---,---|
.
. extending until the end of the data set
.
I've managed to dice this thing into a jagged array by first splitting it using vbLf as a delimiter, and therefore adding those to an array called Lines(). Then I split Lines() up using commas as the delimiter and threw those into a jagged array, let's call it Breadcrumbs()(). I want to throw all the values from Breadcrumbs(i)(6) into an array of its own. Here's my code so far:
Code:
Public Sub CSVparser(file As String)
Dim Lines As Variant
Dim j As Integer
Lines = Split(file, vbLf)
ReDim breadCrumbs(UBound(Lines)) As Variant
For i = 1 to UBound(Lines) - 1
breadCrumbs(i) = Split(Lines(i), ",")
Next i
End Sub
I have a list of P/N's that are used in more then one location. and it's sorted by P/N's.
ColA__ColB__ColC
______Loc___PN
______1_____A
______2_____A
______3_____B
______4_____C
______5_____C
I Want to be able to put in Col A the concatenate results of all equal P/N's from any given list. Or at least select the few cells that i know are duplicates and from that copy the Location to a single Column.
ColA ColB__ColC
______Loc__PN
1,2____1___A
_______2___A
_______3___B
4,5____4___C
_______5___C
Sampling table :
one
two
three
four
one
two
three
one
two
one
Desired results obtained via IF =IF(B2>0,A2&" , ",A2)&IF(C2>0,B2&" , ",B2)&IF(D2>0,C2&" , ",C2)&IF(D2>0,D2,"")
one , two , three , four
one , two , three
one , two
one
Is there any smarter, shorter formula via Concatenate and Substitute or other formulas ?
My closest match, but not good enaugh is =SUBSTITUTE(CONCATENATE(A2&", "&B2&", "&C2&", "&D2), ", , ", " ")
[ returna 2 commad ]
one, two, three, four
one, two, three,
one, two
one ,
I've got data that should be on own row but its come into my excel file as two rows. This is going to be done daily, as a report so its not just once off, i need a macro or something.
so every second row should be appended to the right of each first row
e.g.
Row 1 First Name
Row 2 Last Name
Row 3 First Name
Row 4 Last Name
Row 5 First Name
Row 6 Last Name
I would like:
Row 1 First Name Last Name
Row 2 First Name Last Name
Row 3 First Name Last Name
how to join two tables which their relationship is one column in A table inclue another column in B table.
for example:
Table A:
ColumnA1
ColumnA2
Table B:
ColumnB1
ColumnB2
I want to join Table A and Table B, and the where clause should be A.ColumnA1 include B.ColumnB1.
Like the value of A.ColumnA1 is "Abc1234 test", and the value of B.ColumnB1 is "1234", and then we can join the TableA and Table B
I'm trying to append a bunch of excel files and I'm stuck at this line
View 2 Replies View RelatedI'm looking to append data from Column A in sheet 8 to the next open column in sheet 7. I know how to append rows, but not columns...
View 4 Replies View Relatedjust wanted to know if there is a way i can append to a cell
for example:
cell f3 contains "what a beautiful"
i would like to know how to add more to it
so the final f3 would look like "what a beautiful day"
I currently have a workbook named "Staffing Ratio.xls" I want to create a macro that renames the workbook to "Staffing Ratio Value.xls. Essentially anytime I run this macro it will insert the word "Value" at the end of the file.
View 3 Replies View RelatedI'm writing an Excel Macro and want to sum a number cell with the value "45667" and a text cell with the value "Prague" and return it to a new cell with the value " 45667 Prague"
I've done it successfully with the two text cells "John" and "Hopkins" to "John Hopkins".
This is my
Sub SumCells()
Dim FirstName, SecondName, Zipcode, City, fullname, fulladdres, space
FirstName = range("cell1").value
SecondName = range("cell2").value
Zipcode = range("cell3").value
City = range("cell4").value
space = " "
fullname = firstname + space + secondname
fulladdress = zipcode + space + city
The problem is that city is recognized as "Prague", and the zipcode as 45667 (without the "")
We have approximately 100 rows x 200 columns of data and would like to combine the contents into one row. Is this possible without copying and pasting many times.
eg
1 abc dek jui kol
2 ppo adf asd dfa
into one row
1 abc dek jui kol ppo adf asd dfa
I have an requirement that retrieving the data from two different data bases. I want to compare those two and prepare a report using VBA. I am able to get the data to excel separately, but now I need to join these two sets based on the key columns
View 2 Replies View RelatedI have written the code successfully and it is working fine for me,,But i need to Apply this code into Userform.
View 7 Replies View Related