DataA.xlsx
I would like to combine sheets A B and C into one sheet so that it looks like the sheet I created manually. I have began the processes using formulas but I am unable to combine the final sheet of data as the rows no longer line up using the same formula.
I have a workbook of 96 sheets. I need to get the 4th row of each sheet,
and merge all, 96 of them, into one new sheet.
I'm trying to create a workbook that opens the windows explorer and let me select a workbook, then in one worksheet merge all the active sheets present in one.
View 2 Replies View RelatedI want to merge different worksheet of an existing workbook into one by macro .I did not want to repeat the rows label for each worksheet data.Also I want to get at right hand side i.e in G column the data to be extracted for respective worksheet in the merged data.I have enclosed in attachment an expected solution in a sheet name "merged".However the number of worksheet is here only 3 for sample purposes.However,in reality there is more than 3 .
View 9 Replies View RelatedI am using Excel 2007. I'd like to merge multiple sheets (about 13) into one workbook. The sheets are placed in one folder, and they all include 2 sheets, - only the first sheet should be merged into the final workbook.
The sheets will be updated every 3 months and merged again (-thus replacing the old data).
I have some people data that need to manage using in MS Excel 2010. I've 2 separate excel worksheets that have almost common data for example
Sr Name Contact location
in the first file is |10|John| (347)xxx-xxxx | Lansing, Mi. |
in the Second file it is just just have at |20|John|
I want to merge both files and no one should be double in the file file 1 have full data and file have just names and file one has complete and file 2 has just name just there are few more people that are no listed in file 2 that need to add in file 1.
I have two sheets with a Unique ID that I'd like to match and generate a third sheet. The third sheet would consist of First Name, Last Name, ID number where the phone numbers match from between sheets.
Sheet 1: A = Fname, B = Lname, C = Phone
Sheet 2: A = message, B = Phone
I'd like to make a Sheet 3: A = Fname, B= Lname, C = Phone, D = Message
Is my only option to try and get on a PC and use MS Access? Never had to do this in Excel before.
i had different sheets containing the same type of data in every sheet.what i want is to merge all data into one sheet.i had attached the sample sheet for reference.also let me know how to know the last cell in the data sheet
View 3 Replies View RelatedI have two sheets that both have all the same company names on them but one of the sheets doesn't have ALL of the company names. So, one sheet might have 2500 rows with company names and data specific to that sheet, and the next sheet might have 2450 company names (all match up to the first sheet, but 50 are missing), with different data.
The first sheet is A through L, the second is A through K.
Attached is a sample spreadsheet expressing
First sheet:
A:[Name]
B:[DBA]
C:[Owner/Officer_1]
D:[Owner/Officer_2]
E:[Owner/Officer_3]
F:[Owner/Officer_4]
G:[Phone]
H:[TxDMV]
[code]....
Company Name and Name will match EXACTLY on each sheet, but the second sheet won't have quite as many. So, if possible, I would like to, where column A in matches in both sheet 1 and 2, move or copy all the data from sheet two into the columns on sheet one that come after L.
I use the following code to merge all data a "master sheet", but I want to take the data and put it next to each other on the "master sheet", not under. For example, my range of data is "A1:D15" and I want to copy from all sheets. So my first paste would be A1:D15, then the next should be E1:H15.
I would like the code to find the used range, like it does currently.
Code:
Sub Merge()
Dim ws As Worksheet
ActiveSheet.UsedRange.Offset(0).Clear
[Code]....
I have information in range(p10:Q10) on sheet DEMO! that I want to paste the Values only into a Separate sheet "LIST!" in columns(W:X). The row will vary and will be based on the cell: "DEMO!A3" and will match a cell in column A of "List!"
View 9 Replies View Relatedhow to merge different workbook in a single excel workbook. E.g. letus one workbook name is ram and another is shyam i want to merge both and make another workbook in excel like ram or shyam or another s..
View 1 Replies View RelatedFirstly a confession - I've sinned - I got the code below while searchin the forum and in my excitement, I forgot to get the thread details - so I'm sorry!! So the credit for the code to a forum admin:
View 8 Replies View RelatedSo I know vlookup wont work for this, I could do an array index but that wouldn't easily return exactly what I need.
I have two sheets in the same book. One has three columns
Area
Room
ID
A-1
1101
BG11
A-1
1101
BG12
A-2
1102
BG12
The other has a bunch of columns with different information for the ID field
ID
INFO
INFO
INFO
ETC...
[Code]....
Sheet1 with the three columns will often have multiple rows for the same ID z with different room/area infor. Sheet2 only has one instance of each ID.
What I would like is something, either macro or in a straight formula that will merge both of these. I'd like to add the Area and Room columns to the second sheet (or merge everything into a third sheet) while keeping all the other info and having repeating lines if the ID shows up more than once.
Result:
ID
AREA
ROOM
INFO
INFO
INFO
[Code].....
I explained this well enough
I have two Worksheets: ' Forecast' and 'Actuals'
'Key' for Rows in both sheets is:
ProjectNumber, Change Order Number, Role (Text Desc)
Data for Forecast is Jan, Feb, Mar-> Project Forecast in Days
Data for Actuals is Jan, Feb, Mar-> Project Actuals in Days
Rows in Forecast Sheet may not have matching Actuals (e.g. Project not yet started), AND VICE VERSA (e.g. a new Role may have been needed on a Project, not anticipated at Forecast time, or Actuals are being recorded for a Project without a Forecast being created).
What I would like to do is:
Create a single Sheet with the same key as above,
Each row containing columns for 12 months of Forecast Data, and a further 12 of Actuals Data.
Where an exact key match is found, Row will have both sets of Data (one set from each sheet). Where a match is not found, then Row will have either Forecast Data OR Actuals Data only.
This task needs to be repeated, so needs to be either a straightforward manual procedure, or a Macro.
I have tried various combinations of VLOOKUP, but that doesn't help pull in data that has no matching key. I realise I could manually create a 'keys' Sheet, de-dup and use VLOOKUP into both sheets, but this seems horribly long-winded.
merging the multiple *.xls files into one single *.xls file but each *.xls file com in separate worksheet.
Say i have 30 xls files in datewise i.e., 01.10.10, 02.10.10, 03.10.10 so on....
I want to merge all the above 30 xls files in single file master workbook - in that master workbook file the above 30 xls should come in separate work sheets.
I have around 150 excel files with sample data as follows in "sheet 1" of each workbook,
Excel doc 1:
ABC1
Column 1Column 221Data 1Data 132Data 2
Excel doc 2:
ABC1
Column 1Column 223Data 3Data 334Data 4
I want the rows with data in column 'B' and empty column 'C' from every sheet to be copied into 1 sheet.
Output to be as,
Final Excel doc:
ABC1
Column 1Column 222Data 2
34Data 4
I have a VBA code sample to select the required files in a folder and run the macro over it. The VBA is as follows,
Sub Importxlsrows()
'Import all selected rows to one sheet
Dim xlsDoc As Object
Dim xlsFileName As Variant
Dim RowNo As Integer 'row number in excel
Dim iRow As Long 'row index in Excel
'probably here we need to insert the required logic
End With
Set xlsDoc = Nothing
End If
Next i
ShowStatusFree
MsgBox "Required rows of selected files are imported into the sheet", vbInformation, "Done!"
End Sub
I have an excel file with a large number of sheets with data, each sheet representing one day of a year. Is it possible to merge the daily sheets so that the entire year's data is in one sheet?
View 4 Replies View Relatedhow to merge data from all worksheets into one new in the same workbook, see example in attach. There are 5 worksheets in the test workbook. Each worksheet has name of “Sheetx”,X=number of worksheet. Number of Row in each worksheet is uncertain, but it is always less than 35 (I will say it is “safe” range to prevent from missing data). Requirement: Vertically merge data from A1:F35 (including the “blank”) to “TEST”.
I am using Excel 2007 at office. By the way, I am NOT a excel expert, while posting your answer, could you please also explain how to do it step by step?
I have two workbooks that I'd like to merge together into a single workbook. Or, pull the worksheet out of one and insert it into another.
View 2 Replies View RelatedThe following code was working for me and now no longer works. Also, it works when I step through but not when I run it normally (it stops at the line imeediately following this line:
OrigWB.Sheets("PP&E").Move after:=DestWB.Sheets(DestWB.Sheets.Count) ) regardless of what code it is - even if it is only a message box.
The error message is code execution has been interupted.
******************
Sub PPEMerge()
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Application.StatusBar = "Merging..."
'retrieve source docs:
'PP&E sheets from sec packages
'system beginning and ending balances
[code]....
I have 3-6 workbooks that I need to merge into one. How can I merge all these workbooks into 1? I am using 2007 excel
View 2 Replies View Relatedat the moment I'm trying to consolidate four Workbooks to a Master Workbook.
The four Workbooks I want to merge have the same table structure but except the "Project Number" they have almost different data in their columns.
What I want to do is creating a Master Workbook in which all the Projects are listed once with the information of all four Lists.
While consolidating the data should be checked whether it is already in the Master Workbook or not:
If yes the Macro should copy the to adding data in the existing Project row and there in the correct column.
If not the Macro should create a new row for the Project.
I would like to merge multiple workbooks into a master workbook. All the individual workbooks are identical and only have 1 sheet, and I would like to append them to the master as worksheets then sum them all together. The front sheet showing the totals from all the merged ones.
View 5 Replies View Relatedis to have a folder where I drop multiple workbooks from different stores. There can be 1 or more workbooks at any given time in that folder. Each workbook is a different size as far as the information inside. Next I need to transfer certain columns to the Master Workbook and also have the store location added to the Master workbook (File Name). I have highlighted the store information that needs to be merged to the master, Store 1, Store 2. For reference I have attached a copy of the Main Folder which is on my desktop C:Documents and SettingsDesktopInventory.
View 5 Replies View RelatedI have several Excel files (20 at present) all with different filenames saved in a location:
U:MyWork
Within each workbook is one similar worksheet called "Pro", however there are different amounts of Worksheets called "Ser" on each Workbook.
On each of the Ser sheets are two cell ranges containing values (A1) Name and (B1) Value
eg
1st File
Location: U:My Work
FileName: 123.xls
Worksheet Names: Pro _Ser1_Ser2_Ser3
Ser1 (A1) value= dfd
Ser1 (B1) value=10
Ser2 (A1) value= dd
Ser2 (B1) value=9
Ser1 (A1) value= de
Ser1 (B1) value=11
2nd File
Location: U:My Work
FileName: 333.xls
Worksheet Names: Pro _Ser1
Ser1 (A1) value= db
Ser1 (B1) value=1
What I want is a master spreadsheet to 'suck up' data from all the Ser sheets within all Workbooks and populate the master spreadsheet with Column A =A1 Values from all the Workbook, Worksheets
Column B=B1 Values from all the Workbook, Worksheets
Output on Master Workbook will look like
Column A_____________________Column B
dfd___________________________10
dd____________________________9
de____________________________11
db____________________________1
I have 4 different workbooks that I want to merge into one workbook. I tried moving the sheets from these workbooks into one workbook but to my surprise all the vba / macros didn't transfer over to the other workbook.
I searched here but all I can find were people that wanted to make a summary workbook or merge workbooks into a worksheet which isn't what i want to do.
I just want to simply merge these workbooks into one workbook without losing all the marco and vba stuff that are in each workbook.
I have a work sheet named "Main_List"...In column D starting with "D2" I would like to list worksheets that I would like to have printed via VBA.
The workbook has several hundred worksheets and I would like to list in column D only worksheets that I would like to print with VBA code.
Trying to create a new workbook from another open workbook, then copying all the sheets that aren't called "Summary" to that new open workbook and then saving it. I get a subscript error on this line:
[Code]....
I want to create a hyperlink to a sheet named "adsf"
I am currently in a worksheet named: "62b Arcus"
I want the hyperlink to be set by grabbing the name from another cell.
For example, In cell h7, I have the text: adsf
In cell g7, I want to place a formula such as: =HYPERLINK("adsf!")
Except, instead of this, I want: =HYPERLINK("h7!")
In this way, i want it to hyperlink to a sheet name based on the text that is in h7.
But neither of these formulas work. Both say the following: "Cannot Open the Specified File"
After reading up on this I have discovered that I must save the file and include the file name inside the formula.
My file name is: [Maintenance Color Codes of Houses - colour coded2.xlsm] =HYPERLINK("[Maintenance Color Codes of Houses - colour coded2.xlsm]adsf!A1","LINK")
This hyperlink actually works. Yet I have a problem. What if I rename the file. For this reason, I want it to grab the current file name using "filename". I have tried this by the following:
=MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))
This grabs the current file name "Excluding the text outside of the [ and ]. I was able to create this formula myself.
How come I can't replace the part with [ and ] =HYPERLINK("[Maintenance Color Codes of Houses - colour coded2.xlsm]adsf!A1","LINK")
with:
=MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))
These two formulas together would be:
=HYPERLINK("MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))adsf!A1","LINK")
I also want to replace the "adsf" part with a cell number such as h7. So that it says h7!A1","LINK") or in full:
=HYPERLINK("MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))h7!A1","LINK")
This doesn't work either
I know that I have probably created a ridiculous formula for what I am after. I'm almost there but not quite. You may know something far, far more simple.